共找到 337 条与 低温容器 相关的标准,共 23 页
Cryogenic vessels-Toughness requirements for material at cryogenic temperature-Part 1:Temperatures below-80 ℃
Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing — Amendment 1
This document specifies the requirements for the design, manufacture and testing of pressure relief valves for cryogenic service, i.e. for operation with cryogenic fluids below −10 °C in addition to operation at ambient temperatures from ambient to cryogenic. This document is applicable to valves not exceeding a size of DN 150 designed to relieve single-phase vapours or gases. A valve can be specified, constructed and tested such that it is suitable for use with more than one gas or with mixtures of gases. NOTE This document does not provide methods for determining the capacity of relief valve(s) for a particular cryogenic vessel. Such methods are provided in ISO 21013-3.
Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 1: Reclosable pressure-relief valves
本标准规定了固定式真空绝热液氢压力容器的材料、设计、制造、检验与试验等方面的专项技术要求。本标准可用于指导固定式真空绝热液氢压力容器的建造。
Special Technical Requirements for Stationary Vacuum Insulated Liquid Hydrogen Pressure Vessels
Cryogenic vessels - Hoses (ISO/DIS 21012:2021)
Cryogenic vessels - Hoses (ISO/DIS 21012:2021)
Cryogenic vessels - Valves for cryogenic service (ISO/DIS 21011:2021)
Cryogenic vessels — Toughness requirements for materials at cryogenic temperature —Part 2: Temperatures between −80 ℃ and −20 ℃
Cryogenic vessels — Toughness requirements for materials at cryogenic temperature —Part 2: Temperatures between −80 ℃ and −20 ℃
Le présent document décrit une solution utilisable en France et traite des exigences permettant l'interopérabilité des dispositifs de raccordement de tous les points de ravitaillement en azote liquide au réservoir des camions frigorifiques, et la sécurité des chauffeurs utilisant
Cryogenic vessels - Refueling stations and connection devices for liquid nitrogen - General requirements
Cryogenic vessels - Valves for cryogenic service (ISO/DIS 21011:2021)
Cryogenic vessels -- Cleanliness for cryogenic service -- Amendment 1 (ISO 23208:2017/Amd 1:2020)
Cryogenic vessels - Valves for cryogenic service
Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017 + Amd 1:2020) (consolidated version)
Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017/Amd 1:2020); Amendment A1
This document specifies the minimum requirements for the cleanliness of all surfaces of cryogenic vessels and associated accessories that are in contact with the cryogenic fluid at any expected operating conditions. This document defines the acceptable level of surface and partic
Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017 + Amd 1:2020); German version EN ISO 23208:2019 + A1:2020
1 Scope This document specifies the minimum requirements for the cleanliness of all surfaces of cryogenic vessels and associated accessories that are in contact with the cryogenic fluid at any expected operating conditions. This document defines the acceptable level of surface and particle contamination to minimize the risk of malfunction of equipment and ensure safety against ignition when in contact with oxygen or oxidizing fluids (see ISO 10156).
Cryogenic vessels. Cleanliness for cryogenic service
Cryogenic vessels - Cleanliness for cryogenic service - Amendment 1 (ISO 23208:2017/Amd 1:2020)
Cryogenic vessels — Cleanliness for cryogenic service — Amendment 1: Cryogenic vessels — Cleanliness for cryogenic service — Amendment 1
This document defines practical methods for determining the heat-leak performance of cryogenic vessels. The methods include measurement on both open and closed systems. This document neither specifies the requirement levels for insulation performance nor when the defined methods are applied.
Cryogenic vessels — Cryogenic insulation performance
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号