23.040 管道部件和管道 标准查询与下载

DLA MS3341 REV B-1974 使用MS3367塑料栓紧条的塑料安装座架

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

BRACKET, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS

DLA MIL-B-36964 B-1973 镀铝塑料防水损坏轻便作战毯

This specification covers lightweight, waterproof, aluminized plastic combat casualty blankets which shallal so be suitable for use m'aindbreak, sunshade, poncho, or position indicator In rescue missons.

BLANKET, COMBAT, CASUALTY LIGHTWEIGHT, WATERPROOF, ALUMINIZED PLASTIC

NAVY MIL-T-81914 SUPP 1-1973 曲细挠性塑料管的一般规范

This supplement forms a part of Military Specification MIL-T-81914(AS) and has been approved by the Naval Air Systems Command, Department of the Navy.

TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR

NAVY MIL-T-81914-1973 曲细挠性塑料管的一般规范

This specification e s t a b l i s h e s r e q u i r e m e n t s for plastic.convoluted tubing that provides mechanical protection and support for electric wire bundles. -The continuous operating temperatures range from -67°F (-55oC) to 500°F (260OC) (see 6.1).

TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR

ARMY MIL-C-48061-1973 硝酸纤维素塑料板材

This specification is mandatory for use by all Departments and Agencies of the Department of Defense.

CELLULOSE NITRATE, PLASTIC SHEETS

ARMY MIL-S-60997 A-1973 (军火包装用的)塑料浇铸支援

This specifciation covers colored parts,molded from high density polyethylene, and used as supports for standard contour and various types of ammunition fuzes within shipping containers.

SUPPORT, MOLDED, PLASTIC (FOR USE IN AMMUNITION PACKAGING)

NAVY MIL-A-24456-1971 抗震塑料瓷瓦粘合剂

This specification covers at part epoxy adhesive for bonding plastic vibration damping tiles to metal structures.

ADHESIVE FOR PLASTIC VIBRATION-DAMPING TILE

NAVY MIL-STD-1322-713-1969 塑料容器装LD624589上部及下部柜台砝码的装载

PLACE A SEPARATOR ON TOP OF THE CONTAINERS. P0SIT:ON SECOND LAYER OF CONTAINERS FOLLOWED BY THE THIRD SEPARATOR AND THE THIRD LAYER OF CONTAINERS.

PALLETIZING DOMESTIC UNIT LOAD COUNTER WEIGHTS (UPPER AND LOWER) LD 624589 (IN PLASTIC CONTAINER)

NAVY MIL-STD-1322-704-1969 金属或塑料头部插销MK81及MODS 250磅重几何级数低速度炸弹型的装载

PALLETIZING DOMESTIC UNIT LOAD 250 LB LOW DRAG BOMB (G.P.) MK 81& MODS, WITH METAL OR PLASTIC NOSE PLUGS*

PALLETIZING DOMESTIC UNIT LOAD 250 LB LOW DRAG BOMB (G.P.) MK 81& MODS, WITH METAL OR PLASTIC NOSE PLUGS*

NAVY MIL-STD-1322-703-1969 金属或塑料头部插销MK83及MODS 1000磅重几何级数低速度炸弹型的装载

FOR GENERAL PALLETIZIYG REQUIREMENTS SEE MIL-STD-1322 (NAVì

PALLETIZING DOMESTIC UNIT LOAD 1000 LB, LOW DRAG BOMB (G.P.) MK 83& MODS, WITH METAL OR PLASTIC NOSE PLUGS

NAVY MIL-STD-1322-702-1969 金属或塑料头部插销MK82及MODS500磅重几何级数低速度炸弹型的装载

PLACE LONGITUDINAL STRAPPING, PC. 2, ON PALLET DECK, PC. 1.

PALLETIZING DOMESTIC UNIT LOAD 500 LB LOW DRAG BOMB (G.P.) MK 82& MODS, WITH METAL OR PLASTIC NOSE PLUGS

NAVY MIL-A-24179 A-1969 塑料热绝缘单细胞弹性粘合剂

This specification covers higinitialstrength heat and water resi,s tant

ADHESIVE, FLEXIBLE UNICELLULAR - PLASTIC THERMAL INSULATION

NAVY MIL-M-81288 (1)-1968 柔软的塑料泡沫安装基地

This amendment forms a part of Military Specification Naval Air Systems Command; Department of the Navy MIL-M-81288(WP) dated 1 January i966 and has been approved by the

MOUNTING BASES, FLEXIBLE PLASTIC FOAM

NAVY MIL-P-5431 A (1)-1968 塑胶制品-酚醛树脂及其他形状塑料-酚醛石墨钢板

This amendment forms a part of Military Specification MIL-P-5431A(AS)dated 17 May 1967, and has been approved by the Naval Air Systems Command, Department of the Navy

PLASTIC-PHENOLIC, GRAPHITED, SHEETS, RODS, TUBES AND SHAPES

NAVY MIL-R-23444 A-1968 聚氯乙烯塑料溶胶树酯

This specification covers the requirements for two grades powdered polyvinyl chloride to be used in rocket motors.

RESIN, POLYVINYL CHLORIDE, PLASTISOL GRADE

NAVY MIL-P-5431 A-1967 塑胶制品-酚醛树脂及其他形状塑料-酚醛石墨钢板

This specification establishes the requirements for a laminated phenolic graphited material.

PLASTIC-PHENOLIC, GRAPHITED, SHEETS, RODS, TUBES AND SHAPES

DLA L-P-516 A-1967 铸件热硬化性的塑料层和钻杆

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST

DLA MIL-B-0036470 A-1967 自备塑料移液管

This limited coordination Military specification has been prepared by Defense Personnel Supprt Center based upon currently available technical informátion

BASKET, PIPET, PLASTIC

NAVY L-P-511 (1)-1967 后成形酚醛树脂棉坯布基地热固性层压塑料板

PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC-RESIN, POST-FORMING

PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC-RESIN, POST-FORMING

NAVY MIL-P-81390-1966 用于加固的玻璃光纤聚碳酸酯塑料成型物质

This specification covers three types of glass-fiber filled polycarbonate materials suitable for injection molding and extrusion.

PLASTIC, MOLDING MATERIAL, POLYCARBONATE, GLASS FIBER REINFORCED