23.040.15 有色金属管 标准查询与下载

GOST R 52318-2005 水气输送用圆形铜管.规范

Round copper tubes for water and gas. Specifications

ASTM B677-05(2010) UNS N08925,UNS N08354和UNS N08926无缝管的标准规格

1.1 This specification covers UNS N08925, UNS N08354, and UNS N08926* seamless, cold-worked or hot-finished pipe and tube intended for general corrosive service. 1.2 ASTM International has adopted definitions whereby some grades, such as UNS N08904 previously in this specification, were recognized as stainless steels, because those grades have iron as the largest element by mass percent. Such grades are under the oversight of ASTM Committee A01 and its subcommittees. The products of N08904 previously covered in this specification are now covered by Specifications A269 and A312/A312M. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube

ASTM B677-05(2016) UNS N08925, UNS N08354和UNS N08926无缝管的标准规格

1.1 This specification covers UNS N08925, UNS N08354, and UNS N089262 seamless, cold-worked or hot-finished pipe and tube intended for general corrosive service. 1.2 ASTM International has adopted definitions whereby some grades, such as UNS N08904 previously in this specification, were recognized as stainless steels, because those grades have iron as the largest element by mass percent. Such grades are under the oversight of ASTM Committee A01 and its subcommittees. The products of N08904 previously covered in this specification are now covered by Specifications A269 and A312/A312M. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube

KS D 6728-2004 锆合金管

이 규격은 핵연료 피복관으로 사용하는 이음매 없는 지르코늄 합금 관(이하 관이라 한다.

Zirconium alloy tubes

ASTM B622-04 无缝镍和镍钴合金管和管的标准规范

1.1 This specification covers seamless pipe and tube of nickel and nickel-cobalt alloys (UNS N10001, UNS N10242, UNS N10665, UNS N12160, UNS N10675, UNS N10276, UNS N06455, UNS N06007, UNS N08320, UNS N06975, UNS N06002, UNS N06985, UNS N06022, UNS N06035, UNS N08135, UNS N06255, UNS N06058, UNS N06059, UNS N06200, UNS N06030, UNS N08031, UNS R30556, UNS N08535, UNS N06250, UNS N06060, UNS N06230, UNS N06686, UNS N10629, UNS N06210, UNS N10624, and UNS R20033)* as shown in Table 1. 1.2 Pipe and tube shall be supplied in the solution annealed and descaled condition. When atmosphere control is used, descaling is not necessary.1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

ASTM B111/B111M-04 铜和铜合金无缝冷凝器管和套圈的标准规范

1.1 This specification establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys up to 31/8 in. [80 mm] inclusive, in diameter, for use in surface condensers, evaporators, and heat exchangers. The following coppers and copper alloys are specified: (Warning-Mercury is a definite health hazard in use and disposal. (See 12.1.))

Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

PAS 1039-2004 多层管. 聚烯烃铝多层管

Multi layer pipes-Polyolefin-aluminium-multi layer pipes

LST EN 13349-2003 铜和铜合金 带实心涂层的预绝缘铜管

Copper and copper alloys - Pre-insulated copper tubes with solid covering

ASTM B280-03 空调和制冷现场用无缝铜管的标准规范

1.1 This specification establishes the requirements for seamless copper tube intended for use in the connection, repairs, or alternations of air conditioning or refrigeration units in the field.Note 18212;Fittings used for soldered or brazed connections in air conditioning and refrigeration systems are described in ASME Standard B16.22.Note 28212;The assembly of copper tubular systems by soldering is described in Practice B 828.Note 38212;Solders for joining copper tubular systems are described in Specification B 32. The requirements for acceptable fluxes for these systems are described in Specification B 813.1.2 The tube shall be produced from the following coppers, and the manufacturer has the option to supply any one of them, unless otherwise specified:Copper UNS No.Previously UsedDesignationDescriptionC10200OFOxygen free without residual deoxidantsC12000DLPPhosphorus deoxidized,low residual phosphorusC12200DHPPhosphorus deoxidized,high residual phosphorus1.3 Values stated in inch-pound units are the standard except for grain size which is stated in SI units. SI values given in parentheses are for information only.1.4 The following hazard statement pertains only to the test method described in Section18.2.4 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

ASTM B516-03(2009) 焊接镍铬铁合金(UNS N06603、UNS N06025和UNS N06045)管的标准规范

1.1 This specification covers welded UNS N06600*, N06603, N06025, and N06045 alloy boiler, heat exchanger, and condenser tubes for general corrosion resisting and low or high-temperature service. 1.2 This specification covers tubes 1/8 to 5 in. (3.18 to 127 mm), inclusive, in outside diameter and 0.015 to 0.500 in. (0.38 to 12.70 mm), inclusive, in wall thickness. Table 2 of Specification B 751 lists the dimensional requirements of these sizes. Tubes having other dimensions may be furnished provided such tubing complies with all other requirements of this specification. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes

GOST 21646-2003 热交换器用黄铜管.技术条件

Copper and brass tubes for heat-exchange apparatus. Specifications

DIN EN 13349:2002 铜和铜合金.坚固体外封预绝缘铜管

This European standard specifies the requirements, sampling, test methods and conditions of delivery for seamless round copper tubes covered with solid plastics material. It is applicable to tubes intended for: distributing networks for hot water and cold water, hot water heating systems (temperature not exceeding 95? including underfloor heating systems, domestic gas and liquid fuel distribution. NOTE The primary purpose of the covering is to protect the copper tube against external corrosion in service. In addition, the covering can give some protection against impact and mechanical loading during transportation, installation and operation. Coverings whose primary objective is thermal insulation are not included in this standard.

Copper and copper alloys - Pre-insulated copper tubes with solid covering; German version EN 13349:2002

BS EN 13349:2002 铜和铜合金.带固体遮敝物的预绝缘铜管

This European Standard specifies the requirements, sampling, test methods and conditions of delivery for seamless round copper tubes covered with solid plastics material. It is applicable to tubes intended for: – distributing networks for hot water and cold water; – hot water heating systems (temperature not exceeding 95 °C) including underfloor heating systems; – domestic gas and liquid fuel distribution. NOTE The primary purpose of the covering is to protect the copper tube against external corrosion in service. In addition, the covering can give some protection against impact and mechanical loading during transportation, installation and operation. Coverings whose primary objective is thermal insulation are not included in this standard.

Copper and copper alloys - Pre-insulated copper tubes with solid covering

EN 13349:2002 铜和铜合金.坚固体外封预绝缘铜管

This European Standard specifies the requirements, sampling, test methods and conditions of delivery for seamless round copper tubes covered with solid plastics material. It is applicable to tubes intended for:distributing networks for hot water and cold water;hot water heating systems (temperature not exceeding 95 0C) including underfloor heating systems; domestic gas and liquid fuel distribution. NOTE The primary purpose of the covering is to protectThe copper tube against external corrosion in service. In addition,Thecovering can give some protection against impact and mechanical loading during transportation, installation and operation.Coverings whose primary objective isThermal insulation are not included inThis standard

Copper and copper alloys - Pre-insulated copper tubes with solid covering

DIN 86018:2002 CuNi10Fe1.6Mn焊管.尺寸

The document specifies welded tubes made of CuNi10Fe1,6Mn for use in pipeline systems.#,,#

Welded tubes made of CuNi10Fe1,6Mn for pipes - Dimensions

DIN 85004-4:2002 铜镍合金管.第4部分:管件技术规范

Pipelines made of copper-nickel-alloys - Part 4: Technical specification for tubes

BS EN 12735-2:2001 铜和铜合金.空调和制冷用无缝圆铜管.设备用管

This European Standard specifies the requirements, sampling, test methods and conditions of delivery for seamless round copper tubes, smooth or inner grooved, used for heat exchangers and their internal connecting pipes in the manufacturing of refrigeration and air conditioning equipment.

Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Tubes for equipment

NP EN 1971-2000 铜以及铜合金．旋转管的测试

A presente Norma Europeia especifica o procedimento dos ensaios de correntes de Foucault de cobre redondo sem costura e de tubos de ligas de cobre. O(s) método(s) dos ensaios de correntes de Foucault exigidos, juntamente com a gama de dimens?o e o nível de recep??o, s?o definidos na respectiva norma do produto.

Copper and copper alloys Eddy current test for tubes

ASTM B360-01 限流器用冷拉铜毛细管标准规范

1.1 This specification establishes the requirements for hard-drawn, seamless capillary tube made from Copper Alloy UNS Nos. C10800, C12000, or C12200.1.2 This tube is commonly supplied in straight lengths intended for restrictor applications such as metering lines for liquids and gases where close control over smoothness and diameter of the bore is required to insure uniform flow characteristics between tubes.1.3 The values stated in inch pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units, which are provided for information only and are not considered standard.1.4 The following safety hazard caveat pertains only to the test method described in section 16.4 (Cleanness Test) of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications

ASTM B407-01 镍铁铬合金无缝管标准规范

1.1 This specification covers UNS N08120, UNS N08800, UNS N08801, UNS N08810, UNS N08811, and UNS N08890 in the form of cold-worked and hot-finished annealed seamless pipe and tube. Alloy UNS N08800 is normally employed in service temperatures up to and including 1100176;F (593176;C). Alloys UNS N08120, UNS N08810, UNS N08811, and UNS N08890 are normally employed in service temperatures above 1100176;F (593176;C) where resistance to creep and rupture is required, and they are annealed to develop controlled grain size for optimum properties in this temperature range.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.3 The following safety hazards caveat pertains only to the test method portion, Section13 , of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube