23.040.50 其他材料的管和配件 标准查询与下载

CJ/T 108-1999 铝塑复合压力管(搭接焊)

Polyethylene/Aluminum/Polyethylene composite pressure pipe

ASTM C508/C508M-00(2015) 石棉水泥地下排水管的标准规格

1.1 This specification covers asbestos-cement perforated and plain pipe intended for use in the conveyance of drainage water for the subsurface drainage of highways, airports, farms, foundations, and other similar drainage work. 1.2 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Asbestos-Cement Underdrain Pipe

ASTM C1053-00(2015) 排水沟污水沟和排出口 (DWV) 用的硼硅酸盐玻璃管和配件的标准规格

1.1 This specification covers chemically resistant, low expansion, Type I, borosilicate glass, Class A (see Specification E438), used to manufacture corrosion-resistant pipe and fittings for drain, waste, and vent service. 1.2 The pipe and fittings covered by the specification are intended for chemical resistant service above and below grade under gravity flow or vacuum conditions. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The pipe and fittings shall have beaded or plain ends.

Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications

ASTM C1449-99 无石棉纤维水泥无压污水管标准规范

1.1 This specification covers requirements relating to non-asbestos fiber-cement non-pressure sewer pipe, joints, and fittings suitable for use with gravity flow, intended for sewerage and drainage applications from point of use to point of treatment or disposal. It defines certain conditions of manufacture, classification, characteristics, and acceptance tests applicable to these products. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information only.Note 1--Rubber rings suitable for use with this pipe are covered in Specification D 1869.Note 2--This specification is issued for product standardization and purchasing purposes only, and does not include requirements for installation or the relationship between operating conditions and the strength characteristics of the various classifications of pipe. The purchaser is cautioned that he must correlate installation and operating conditions with the specified characteristics of the pipe. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe

DS/EN 12585:1999 玻璃厂、管道和配件 管道和配件 DN 15 至 1 000 兼容性和互换性

This standard specifies the essential requirements for compatibility and interchangeability of borosilicate glass plant and fittings from DN 15 to DN 1 000 mm

Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1 000 - Compatibility and interchangeability

JG/T 109-1999 机具用软轴软管

本标准规定了机具用软轴软管的产品分类、技术要求、检验规则，以及标志、包装、运输贮存等要求内容。 本标准适用于机具上传递扭矩的软轴软管。

Flexible shaft and pipe of hadn-held motor operated tools

EN 259-5:1994/A1:1999 排水管和下水道用玻璃陶管和配件及管接头.第5部分:穿孔的玻璃陶管和配件用要求

This Amendment to the European Standard EN 295-5:1994 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 1999, and conflicting national standards shall be withdrawn at the latest by July 1999.

Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 5: Requirements for perforated vitrified clay pipes and fittings

ASTM C541-98(2002)e1 石棉水泥管内衬的标准规范

Standard Specification for Linings for Asbestos-Cement Pipe

ASTM D6244-98 土工合成材料路面板排水管垂直压缩的标准试验方法

1.1 This test method evaluates vertical strain and core area change of geocomposite pavement panel drains under vertical loading. 1.2 The values as stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains

ASTM C668-98(2014) 石棉水泥传输管的标准规格

1.1 This specification covers asbestos-cement transmission pipe intended for use in transmission systems that carry fluids under pressure. A transmission system consists of pipe lines which convey fluids from their source to a point of distribution or discharge. The system is characterized by relatively steady flow and few appurtenances, thereby permitting reasonable hydraulic analysis, including surge analysis. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. Note 1: This specification is issued for product standardization and purchasing purposes only, and does not include requirements for installation or the relationships between operating conditions and the strength characteristics of the various classifications of pipe. The purchaser is cautioned that he must correlate installation and operating conditions with the specified characteristics of the pipe. 1.3 Warning—Breathing of asbestos dust is hazardous. Asbestos and asbestos products present demonstrated health risks for users and for those with whom they come into contact. In addition to other precautions, when working with asbestos-cement products, minimize the dust that results. For information on the safe use of chrysoltile asbestos, refer to “Safe Use of Chrysotile Asbestos: A Manual on Preventive and Control Measures.”2 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See for a specific hazard warning.

Standard Specification for Asbestos-Cement Transmission Pipe

ASTM C875-98(2014) 石棉水泥导管的标准规格

1.1 This specification covers asbestos-cement conduit for use in electric-power systems and communication systems. The service is for both underground and exposed conditions. 1.2 The values stated in SI units are to be regarded as the standard. The values stated in parentheses are provided for information only. 1.3 Warning—Breathing of asbestos dust is hazardous. Asbestos and asbestos products present demonstrated health risks for users and for those with whom they come into contact. In addition to other precautions, when working with asbestos-cement products, minimize the dust that results. For information on the safe use of chrysoltile asbestos, refer to “Safe Use of Chrysotile Asbestos: A Manual on Preventive and Control Measures.”2 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See 1.3 for specific hazard warning.

Standard Specification for Asbestos-Cement Conduit

EN 12585:1998 玻璃设备,管道和配件.DN15至1000管道和配件.兼容性和互换性

This standard specifies the essential requirements forcompatibility and interchangeability of borosilicateglass plant, piping and fittings from DN 15 to DN 1000.

Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1000 - Compatibility and interchangeability

ASTM C663-98(2014) 石棉水泥排雨水管的标准规格

1.1 This specification covers asbestos-cement pipe intended for use in storm-water drainage of highways, airports, farms, foundations, and other similar drainage systems. 1.2 The values stated in SI units are to be regarded as the standard. The values stated in parentheses are for information only. 1.3 Warning—Breathing of asbestos dust is hazardous. Asbestos and asbestos products present demonstrated health risks for users and for those with whom they come into contact. In addition to other precautions, when working with asbestos-cement products, minimize the dust that results. For information on the safe use of chrysoltile asbestos, refer to “Safe Use of Chrysotile Asbestos: A Manual on Preventive and Control Measures.”2 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See for a specific hazard warning.

Standard Specification for Asbestos-Cement Storm Drain Pipe

BS EN 588-1:1997 下水管和排水道用纤维水泥管.第1部分:重力管路系统用管道、管连接件和管配件

This Part 1 of EN 588 specifies requirements for fibre-cement pipes, joints and fittings suitable for gravity systems at atmospheric pressure intended for sewerage and drainage applications. It is applicable only to the more commonly used fittings i.e. angled branches or tees and bends. It defines general composition, classification, geometrical, mechanical and physical characteristics, acceptance tests, type tests and quality control. For pressurized sewers, fibre-cement pipes and joints in accordance with EN 512 will be used with additional consideration relevant to sewerage transport. NOTE 1. EN 588-2 specifies requirements for fibre-cement manholes and inspection chambers. NOTE 2. Occasional momentary overpressures of no more than 100 kPa are acceptable.

Fibre-cement pipes for sewers and drains - Pipes, joints and fittings for gravity systems

NF P16-304*NF EN 588-1:1997 地下排水管道用纤维水泥管.第1部分:重力循环系统用管子、接头和配件(欧洲标准EN 588-1)

Fibre-cement pipes for sewers and drains. Part 1 : pipes, joints and fittings for gravity systems.

DIN EN 588-1:1996 纤维水泥污水管.第1部分:重力系统用管、连接件和配件

The document gives specifications relating to fibre-cement pipes, joints and fittings suitable for use with gravity flow at atmospheric pressure intended for sewerage and drainage applications. It defines composition, classification, geometrical, mechanical and physical characteristics, acceptance tests and type tests.#,,#

Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems; German version EN 588-1:1996

ANSI/ASAE S261.7-1996 非钢筋混凝土灌溉管系统的设计和安装

Guide to engineers in the design & installation of low or intermediate pressure nonreinforced concrete irrigation pipelines & for the preparation of detailed specifications for a particular installation. Restricted to pipelines with vents or stands open to the atmosphere or closed pipelines operating at less than 6 m (20 ft) of head. Systems designed and/or installed under this Standard shall utilize pipe conforming to one or more of the following types of nonreinforced concrete irrigation pipe: Pipelines with mortar joints; Pipelines with rubber gasket joints; Cast-in-place pipelines.

Design and Installation of Nonreinforced Concrete Irrigation Pipe Systems

EN 588-1:1996 污水管和排水管用纤维水泥管.第1部分:重力系统用管道,管连接件和管配件

This Part 1 of EN 588 specifies requirements for fibre-cement pipes, joints and fittings suitable for gravity systems at atmospheric pressure intended for sewerage and drainage applications. It is applicable only to the more commonly used fittings i.e. angled branches or tees and bends.

Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems

GSO 583:1995 用于污水和排水的陶管

This standard is concerned with the socket and spigot clay pipes used for draining sewage and water under the effect of gravity.

CLAY PIPES FOR DRAINING SEWAGE AND WATER

GSO 584:1995 污水和排水用粘土管的测试方法

This standard is concerned with the methods of test for socket and spigot clay pipes for draining sewage and water under the effect of gravity.

METHODS OF TEST FOR CLAY PIPES FOR DRAINING SEWAGE AND WATER