23.040.50 其他材料的管和配件 标准查询与下载

ASTM C507M-19 钢筋混凝土椭圆形水泥 风暴排水和下水道管道标准规范（公制）

Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)

ASTM C655M-19 钢筋混凝土承载盖 风暴排水管和下水管（公制）标准规范

Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)

ASTM C506M-19 钢筋混凝土拱廊 风暴排水管和下水道管道标准规范（公制）

Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)

ASTM C655-19 钢筋混凝土D型装载机 风暴排水管和下水道管道标准规范

Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe

ASTM C76-19a 钢筋混凝土涵洞、雨水管和污水管的标准规范

Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

ASTM C76M-19a 钢筋混凝土涵洞、雨水管和污水管的标准规范（米制）

Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)

ASTM C507-19 钢筋混凝土椭圆形套管 风暴排水管和下水道管道标准规范

Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe

T/LNWTA 003-2019 供水管材中无机物元素快速检测方法 能量色散X射线荧光光谱法

供水管的无机物元素种类与含量是材料合格的重要指标，为保障供水安全，实现供水管材中无机物组分控制，规范供水管材的无机元素种类与含量快速检测方法，制定本标准。 本标准规定了测定供水管材中无机物元素的快速检测方法，能量色散X射线荧光光谱法。 本标准适用于供水管材：无规共聚聚丙烯（PP-R）给水管、氯化聚氯乙烯（PVC-C）给水管、聚乙烯（PE）管、丙烯腈-丁二烯-苯乙烯（ABS）给水管、硬聚氯乙烯管材（PVC-U）、TPEP热熔3PE钢塑复合管、钢塑复合管、热浸塑电缆导管、热浸塑消防涂覆钢管、聚氨酯保温管中无机元素的测定。本标准也适用于其他管材中无机物元素的快速分析。本标准不适用于准确定量分析。

Determination of elements in the pipe for drinking water —Energy dispersive X-ray fluorescence spertroscopy (EDXRF) method

ASTM C361-19 钢筋混凝土低水头压力管标准规范

Standard Specification for Reinforced Concrete Low-Head Pressure Pipe

T/LNWTA 002-2019 供水管材中聚合物快速鉴别红外吸收光谱法和差示扫描量热法

本标准规定了测定供水管材中聚合物的红外吸收光谱法（IR）和差示扫描量热法（DSC）分析方法。 本标准适用于供水管材：给水用聚乙烯（PE）管材、无规共聚聚丙烯（PP-R）给水管、氯化聚氯乙烯（PVC-C）给水管、硬聚氯乙烯管材（PVC-U）、丙烯腈-丁二烯-苯乙烯（ABS）给水管、TPEP热熔3PE钢塑复合管、钢塑复合管、热浸塑电缆导管、热浸塑消防涂覆钢管、聚氨酯保温管中聚合物的测定。本标准也适用于其他管材中聚合物的快速分析。本标准不适用于定量分析。

Rapid Identification of Polymers in Pipes for Water Supply Infrared absorption spectrometry（IR）and differential scanning calorimetry（DSC）

T/ZZB 1002-2019 燃气用埋地聚乙烯(PE)管件

本部分规定了燃气用埋地聚乙烯管件（以下简称“管件”）的定义、符号、产品分类、基本要求、技术要求、力学性能、物理性能、试验方法、检验规则、技术文件、标志和标签，包装、运输、贮存、质量承诺。 本部分适用于PE80和PE100混配料制造的公称直径为16 mm～630 mm燃气用埋地聚乙烯管件。  本部分适用于下列连接方式的管件： ——热熔对接及电熔连接的插口管件； ——电熔管件： a)　电熔承口管件； b)　电熔鞍形管件。 注：管件可以是套筒、等径或变径三通、变径、弯头、鞍形或端帽等。  本部分不适用于利用加热工具的热熔承插连接的管件。 在输送人工煤气和液化石油气时，应考虑燃气中存在的其他组分（如芳香烃、冷凝液等）在一定浓度下对管件性能产生的不利影响。

Buried polyethylene(PE) fittings for the supply of gaseous fuels

ASTM C1478-19 钢筋混凝土风暴下水道结构 管道和侧倾之间的风暴排水弹性连接器的标准规范

Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals

ASTM C1447/C1447M-04(2019) 无石棉纤维水泥地下排水管的标准规范

1.1 This specification covers non-asbestos fiber-cement perforated and plain pipe intended for use in the conveyance of drainage water for the subsurface drainage of highways, airports, farms, foundations, and other similar drainage work. 1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe

ASTM C1449/C1449M-05a(2019) 无石棉纤维水泥无压污水管标准规范

1.1 This specification covers requirements relating to nonasbestos fiber-cement non-pressure sewer pipe, joints, and fittings suitable for use with gravity flow, intended for sewerage and drainage applications from point of use to point of treatment or disposal. It defines certain conditions of manufacture, classification, characteristics, and acceptance tests applicable to these products. 1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. NOTE 1—Rubber rings suitable for use with this pipe are covered in Specification D1869. NOTE 2—This specification is issued for product standardization and purchasing purposes only, and does not include requirements for installation or the relationships between operating conditions and the strength characteristics of the various classifications of pipe. The purchaser is cautioned that he must correlate installation and operating conditions with the specified characteristics of the pipe. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe

ASTM C1675-19 涵洞、雨水道和下水道用预制钢筋混凝土整体箱形截面的安装

Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers

ASTM C1448/C1448M-05(2019) 无石棉纤维水泥导管的标准规范

1.1 This specification covers non-asbestos fiber-cement conduit for use in electric-power systems and communication systems. The service is for both underground and exposed conditions. 1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Non-Asbestos Fiber-Cement Conduit

ASTM C1450/C1450M-04(2019) 无石棉纤维水泥雨水管的标准规范

1.1 This specification covers non-asbestos fiber-cement pipe intended for use in storm-water drainage of highways, airports, farms, foundations, and other similar drainage systems. 1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. NOTE 1—Experience has shown that the successful performance of this product depends upon the proper selection of the pipe strength, the type of bedding and backfill, care that the installation conforms to the construction specifications, and provision for adequate inspection at the construction site. This specification does not include requirements for bedding, backfill, the relationship between field load conditions and the strength designation of the pipe, or durability. These requirements should be included in the project specification. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe

ASTM C76-19 钢筋混凝土涵洞、雨水管和污水管的标准规范

Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

ASTM C1214-19 用负压（真空）试验方法测定混凝土排水管的标准试验方法

1.1 This test method covers procedures for testing concrete pipe sewerlines, when using the negative air pressure (vacuum) test method to demonstrate the integrity of the installed material and the construction procedures. This test method covers testing of 4 to 36-in. diameter circular concrete pipe sewerlines utilizing gasketed joints. NOTE 1—The user of this test method is advised that methods described herein may also be used as a preliminary test to enable the manufacturer or installer to demonstrate the condition of sewer pipe prior to delivery or backfill. Minimum test times presented in Table 1 are for pipelines. Holding times for testing an individual pipe may have to be increased to allow for the accumulation of leakage when the tested pipe are incorporated into a continuous pipeline. NOTE 2—The user of this test method is advised that the negative air pressure (vacuum) test criteria presented in this test method are similar to those in general use. The test and criteria have been used widely and successfully in testing smaller diameter pipe. Larger pipe will be accepted more conveniently by visual inspection and individual joint testing. NOTE 3—Test times tabulated and the rate of air loss in this standard are based on successful testing of installed pipelines. However, since air and water have different physical properties, retests of some pipelines not meeting field air tests have been successful when tested with water. 1.2 This test method is the inch-pound companion to Test Method C1214M; therefore, no SI equivalents are presented in the test method. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Section 6 for specific safety precautions. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method

ASTM C1103M-19 已安装的预制混凝土污水管接头验收试验的标准实施规程（米制）

1.1 This practice covers procedures for testing the joints of installed precast concrete pipe sewer lines, when using either air or water under low pressure to demonstrate the integrity of the joint and the construction procedures. This practice is used for testing precast concrete sewer lines utilizing rubber gasket sealed joints. NOTE 1—The user of this practice is advised that methods described herein may also be used as a preliminary test to enable the manufacturer or installer to demonstrate the condition of sewer pipe prior to delivery. 1.2 This practice is the SI companion of Practice C1103. NOTE 2—The owner shall specify the following: who will conduct, observe, and furnish labor, material, and measuring devices and pay for the tests; who is responsible for determining local ground conditions; and whether an air or water test is to be used. NOTE 3—The user of this practice is advised that test criteria presented in this practice are similar to those in general use. Pipe shall be accepted by infiltration or exfiltration testing utilizing Practice C969M. NOTE 4—Test times tabulated and the rate of air loss in this standard are based on successful testing of installed pipelines. However, since air and water have different physical properties, retests of some pipelines not meeting field air tests have been successful when tested with water. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific safety precautions are given in Section 6. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)