23.060.01 阀门综合 标准查询与下载

KS B 2301-2021 青铜闸阀、截止阀、角阀和止回阀

Bronze gate, globe, angle and check valves

KS B 2304-2021 阀门检验通用规则

General rules for inspection of valves

CSA B64 Series-2021 回流防止器和真空破坏器

Backflow preventers and vacuum breakers

T/WZBF 001-2021 阀门的逸散性检测与控制

一、本标准内容包括四个部分：1、前言，2、引言，3、标准正文，4、附录 二、前言主要包括起草依据，引用标准，标准提出并归口单位，标准的主要起草单位和主要起草人。 三、引言部分主要说明本标准制订的必要性，对适应国际潮流，提高阀门产品质量，减少环境污染具有重大现实意义和深远的历史意义。 四、标准文本的主要内容包括基本要求、检验、试验、试验分类和等级鉴定、实施控制、标志、阀门的合格证书和再试验及使用吸气法的泄漏测量方法。 五、附录主要介绍吸气法测量方法的原理、设备、操作、判定及综合要求。

Fugitive detection and control of valves

GSO EN 12266-1:2021 工业阀门 金属阀门的测试 第1部分：压力测试、测试程序和验收标准 强制性要求

This European Standard specifies requirements for tests, test procedures and acceptance criteria for production testing of industrial valves made of metallic materials. The specified tests may also be used as type tests or acceptance tests. Safety devices are not covered by EN 12266-1. When specified as a normative reference in a valve product or performance standard, this European Standard is to be considered in conjunction with given specific requirements of the valve product or performance standard. Where requirements in a product or performance standard differ from those given in this European Standard, the requirements of the product or performance standard apply. NOTE For testing of industrial valves of thermoplastic materials, ISO 9393-1 and ISO 9393-2 apply.

Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements

GSO EN 736-1:2021 阀门 术语 第1部分：阀门类型的定义

This European Standard specifies the denominations of valves to provide a uniform and systematic terminology for all types of valves.

Valves - Terminology - Part 1: Definition of types of valves

GSO ISO 19240:2021 工业阀门 用于化学过程及相关行业的衬里金属直角回转阀和止回阀

ISO 19240:2017 specifies requirements for design, dimensions, material, fabrication and production testing of lined metal quarter turns valves (plug valves, butterfly valves, ball valves) and check valves with flanged, wafer and wafer lug body types. It covers valves of the nominal sizes, DN: - 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 750, 800, 900, 1 000, 1 200; corresponding to nominal pipe sizes, NPS 1/2 to NPS 48, and applies to pressure designations: - PN 10, 16, 25, 40; - Class 150, 300.

Industrial valves — Lined metal quarter turn and check valves for chemical process and related industries

GSO ISO 28921-2:2021 工业阀门 低温应用隔离阀 第2部分：型式试验

ISO 28921-2:2015 specifies requirements for the type testing of isolating valves for low-temperature applications to verify the performance of valves at a low temperature from ? 50 °C down to ? 196 °C. NOTE Nominal sizes (DN), nominal pipe sizes (NPS), nominal pressure (PN) and Classes are covered in ISO 28921‑1. ISO 28921-2:2015 does not evaluate valve actuators unless they are integral part of the valve. Valves during testing can be operated manually or an actuator can be used during the testing. The effect of cold gas vapours during testing is taken into consideration in particular if the actuator is mounted directly over the test stand with the cold gases engulfing the actuator. ISO 28921-2:2015 does not apply to valves for cryogenic services, designed in accordance with ISO 21011, used with cryogenic vessels.

Industrial valves — Isolating valves for low-temperature applications — Part 2: Type testing

GSO EN 12570:2021 工业阀门 操作元件尺寸确定方法

This EN specifies the requirements for establishing the minimum size of the operating element supplied with an industrial valve regarding the force applied by one person to operate the valve under specified working conditions. This standard applies to manual operating elements of sizes from 100 mm to 1000 mm: - directly mounted on valves; - mounted on valve reduction gearboxes; - used for manual operation of power actuated valves. This standard does not apply to: - impactor handwheels; - T-keys; - chainwheels.

Industrial valves -- Method for sizing the operating element

OENORM EN ISO 10497:2021 阀门测试 防火型式测试要求（ISO/DIS 10497:2021）

Testing of valves - Fire type-testing requirements (ISO/DIS 10497:2021)

GSO EN 12266-2:2021 工业阀门 金属阀门测试 第2部分：测试、测试程序和验收标准 补充要求

This European Standard specifies supplementary requirements for tests, test procedures and acceptance criteria of industrial valves made of metallic materials. The specified tests may be used as type tests, production tests or acceptance tests. The application of these tests is specified in the appropriate product or performance standards. When specified as a normative reference in a valve product or performance standard, this European Standard should be considered in conjunction with given specific requirements of the valve product or performance standard. Where requirements in a product or performance standard differ from those given in this European Standard, the requirements of the product or performance standard apply. NOTE For testing of industrial valves of thermoplastic materials, ISO 9393-1 and ISO 9393-2 apply.

Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria – Supplementary requirements

GSO EN 19:2021 工业阀门 金属阀门的标记

This European Standard specifies the requirements for marking of industrial metallic valves. It defines the method of applying the markings, on the body, on a flange, on an identification plate or any other location. When specified as a normative reference in a valve product or performance standard, this European Standard has to be considered in conjunction with the specified requirements of that valve product or performance standard. The marking requirements for plastic valves are not within the scope of this European Standard.

Industrial valves - Marking of metallic valves

GSO ISO 6553:2021 自动蒸汽疏水阀 标记

ISO 6553:2016 specifies mandatory and optional markings for automatic steam traps.

Automatic steam traps — Marking

DIN EN ISO 22153:2021 工业阀门用电动执行器 一般要求（ISO 22153:2020）；德文版 EN ISO 22153:2021

This document provides basic requirements for electric valve actuators, used for on-off and control valves. It includes guidelines for classification, design, enclosure and corrosion protection, and methods for conformity assessment.Combinations of electric actuators and gearboxe

Electric actuators for industrial valves - General requirements (ISO 22153:2020); German version EN ISO 22153:2021

SN EN ISO 22153:2021 工业阀门用电动执行器 一般要求（ISO 22153:2020）

Electric actuators for industrial valves - General requirements (ISO 22153:2020)

LST EN ISO 22153:2021 工业阀门用电动执行器 一般要求（ISO 22153:2020）

Electric actuators for industrial valves - General requirements (ISO 22153:2020)

BS ISO 5752:2021 法兰管道系统中使用的金属阀门 面对面和中心面对面尺寸

Metal valves for use in flanged pipe systems. Face-to-face and centre-to-face dimensions

ISO 5752:2021 法兰连接的管道系统用金属法兰. 结构长度和端面至中心的尺寸

This document specifies the basic series of face-to-face (FTF) and centre-to-face (CTF) dimensions for two-way metal valves of the gate, globe, diaphragm, ball, plug, butterfly design types used as isolating and check valves in flanged pipe systems. Each basic series of face-to-face and centre-to-face dimensions can be used as required with flanges of mating dimensions conforming to the equivalent EN or ASME flange series. This document covers valves with the following PN, Class, DN and NPS values: — PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400; — Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1500; Class 2500; — DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 650; DN 700; DN 750; DN 800; DN 900; DN 1000; DN 1050; DN 1200; DN 1400; DN 1600; DN 1800; DN 2000; — corresponding to nominal sizes NPS: ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 26; 28; 30; 32; 36; 40; 42; 48; 56; 64; 72; 80. NOTE See Annex B for the relationship between DN and NPS.

Metal valves for use in flanged pipe systems - Face-to-face and centre-to-face dimensions

prEN ISO 10497:2021 阀门测试 防火型式测试要求（ISO/DIS 10497:2021）

Testing of valves - Fire type-testing requirements (ISO/DIS 10497:2021)

BS ISO 23632:2021 工业阀门 阀门的设计验证测试

Industrial valves. Design validation-testing of valves