23.060.01 阀门综合 标准查询与下载
共找到 868 条与 阀门综合 相关的标准，共 58 页
Industrial valves. Shell design strength. Tabulation method for steel valve shells
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2014-11-30
- 实施
- 2014-11-30
This European Standard specifies minimum requirements for the design, testing and production testing of valves, including appropriate fittings, which are connected to mobile or static LPG pressure vessels above 150 l water capacity. Pressure relief valves and their ancillary equipment, contents gauges and automotive LPG components are outside the scope of this European Standard. This European Standard does not apply to refineries or other process plants.
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2014-11
- 实施
Marine self closing valves for oil level gauges
- ICS
- 23.060.01
- CCS
- 发布
- 20141008
- 实施
- 20141008
Ships duplex oil strainers(H type)
- ICS
- 23.060.01
- CCS
- 发布
- 20141008
- 实施
- 20141008
Application for wire gauze of oil strainer for marine use
- ICS
- 23.060.01
- CCS
- 发布
- 20141008
- 实施
- 20141008
Shipbuilding－16K water gauges with valve
- ICS
- 23.060.01
- CCS
- 发布
- 20141008
- 实施
- 20141008
Shipbuilding－General rules for inspection of strainers
- ICS
- 23.060.01
- CCS
- 发布
- 20141008
- 实施
- 20141008
This European Standard specifies the tabulation method for determining the wall thickness of valve bodies, bonnets and covers with essentially circular cross-section made in forged, cast or fabricated steel. For valve shells with oval, rectangular or non-circular shapes, see 8.6. The range of PN or Class designations for which thicknesses are tabulated is: PN 2,5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400, Class 150, Class 300,Class 600, Class 900, Class 1500, Class 2500, Class 4500. Pressure/temperature ratings are specified for each material group for the above PN Standard Class and Special Class designations. The non-destructive examination procedures and acceptance levels that need to be applied to the valve shell components in order for the valve to be used at Special Class pressure/temperature ratings are defined. Details are also given for the alternative rules for small bore valves of DN 65 and smaller designated as Limited Class. This standard does not apply to threaded end valves: - DN 80 or larger; - or which have pressure ratings greater than Class 2500; - or which operate at temperatures greater than 540 °C. Socket welding end valves DN 80 or larger are outside the scope of this standard.
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
- ICS
- 23.060.01
- CCS
- H40
- 发布
- 2014-10
- 实施
This European Standard specifies the calculation method for valve shells manufactured in metallic materials other than steel. The loadings to be accounted for are in accordance with EN 12516-2. Design methods are in accordance with EN 12516-2, design by formulae according to the relevant clauses.
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
- ICS
- 23.060.01
- CCS
- H40
- 发布
- 2014-10
- 实施
This European Standard specifies the method for the strength calculation of the shell with respect to internal pressure of the valve.
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
- ICS
- 23.060.01
- CCS
- H40
- 发布
- 2014-10
- 实施
本标准规定了阀门用短牙梯形螺纹(以下简称短牙梯形螺纹)的术语和代号、牙型、直径与螺距系列、基本尺寸、公差和螺纹标记。本标准适用于阀门产品的阀杆传动螺纹。
Stub trapezoidal screw threads for valve
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2014-07-09
- 实施
- 2014-11-01
本标准规定了阀门低温试验装置的术语和定义、结构型式、技术要求、操作程序等。本标准适用于阀门低温试验装置。其受试阀门的范围为:公称压力PN16~PN420,公称尺寸DN15~DN900,介质温度-196℃~-29℃的法兰、对夹和焊接连接的低温闸阀、截止阀、止回阀、球阀和蝶阀。其他低温阀门亦可参照使用,但必须适合从受试阀门外部冷却的降温方式。
Specification for valve cryogenic test rig
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2014-07-09
- 实施
- 2014-11-01
本标准规定了工业阀门供货的一般要求、表面防护涂层、标志、包装、贮存和质量保证。本标准适用于工业管道和设备用阀门。
Industrial valves.Delivery specification
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2014-07-09
- 实施
- 2014-11-01
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
- ICS
- 23.060.01
- CCS
- 发布
- 2014-06-20
- 实施
이 표준은 일반 기계 장치, 화학 장치 등에 사용하는 주강 플랜지형 밸브(이하 밸브라 한다.)에 대하여 규정한다.
Cast steel flanged valves
- ICS
- 23.060.01
- CCS
- J30
- 发布
- 2014-06-04
- 实施
- 2014-06-04
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 488:2011+A1:2014
- ICS
- 23.060.01
- CCS
- P46
- 发布
- 2014-05
- 实施
This International Standard specifies face-to-face dimensions for a range of automatic steam traps used in flanged pipe systems
Flanged automatic steam traps -- Face-to-face dimensions
- ICS
- 23.060.01
- CCS
- 发布
- 2013-12-31
- 实施
