23.060.01 阀门综合 标准查询与下载
共找到 868 条与 阀门综合 相关的标准，共 58 页
Malleable iron 10 K screwed valves
- ICS
- 23.060.01
- CCS
- 发布
- 20131230
- 实施
- 20131230
Industrial valves－Measurement, test and qualification procedures for fugitive emissions－Part 1：Classification system and qualification procedures for type testing of valves
- ICS
- 23.060.01
- CCS
- 发布
- 20131227
- 实施
- 20131227
Metallic butterfly valve for general purposes
- ICS
- 23.060.01
- CCS
- 发布
- 20131227
- 实施
- 20131227
本标准规定了电站用阀门的型号编制方法。包括类型代号、驱动方式代号、连接形式代号、结构形式代号、阀座密封面或衬里材料代号、公称压力(或工作温度下的工作压力)代号和阀体材料代号。本标准适用于电站用截止阀、闸阀、止回阀、安全阀、节流阀、减压阀、蝶阀、堵阀等。
Methods for model compositing of power station valves
- ICS
- 23.060.01
- CCS
- J98
- 发布
- 2013-11-28
- 实施
- 2014-04-01
Bursting disks and bursting disk assemblies
- ICS
- 23.060.01
- CCS
- 发布
- 20131028
- 实施
- 20131028
Integral gas timing automatic shut-off and over-current cut-off control device
- ICS
- 23.060.01
- CCS
- J 16
- 发布
- 2013-09-14
- 实施
- 2013-10-01
This International Standard gives the definitions of the major technical terms and expressions used to describe an automatic steam trap as far as dimension, pressure, temperature and flow rate are concerned, as well as their corresponding Symbols and units.
Automatic steam traps -- Definition of technical terms
- ICS
- 23.060.01
- CCS
- 发布
- 2013-09-09
- 实施
This part of ISO 15848 specifies testing procedures, for evaluation of external leakage of valve stem seals (or shaft) and body joints of isolating valves and control valves intended for application in volatile air pollutants and hazardous fluids. End connection joints, vacuum application, effects of corrosion and radiation are excluded from this part of ISO 15848. This part of ISO 15848 concerns classification system and qualification procedures for type testing of valves.
Industrial valves -- Measurement, test and qualification procedures for fugitive emissions -- Part 1: Classification system and qualification procedures for type testing of valves
- ICS
- 23.060.01
- CCS
- 发布
- 2013-09-09
- 实施
This part of ISO 15848 specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids. End connection joints, vacuum application, effects of corrosion and radiation are excluded from this part of ISO 15848. The production acceptance test is intended for standard production valves where fugitive emissions standards are specified.
Industrial valves -- Measurement, test and qualification procedures for fugitive emissions -- Part 2: Production acceptance test of valves
- ICS
- 23.060.01
- CCS
- 发布
- 2013-09-09
- 实施
Shipbuilding－General rules for inspection of strainers
- ICS
- 23.060.01
- CCS
- 发布
- 2013-08-30
- 实施
Industrial valves - Isolating valves for low-temperatures applications - Part 1: design, manufacturing and production testing
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2013-06-29
- 实施
- 2013-06-29
Industrial valves. Isolating valves for low-temperature applications. Design, manufacturing and production testing
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2013-05-31
- 实施
- 2013-05-31
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements; German version EN 13774:2013
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2013-05
- 实施
本标准规定了燃气管道用铜制阀门的结构型式、型号、技术要求、试验与检验方法、检验规则、标志、防护、包装和储运。本标准适用于公称压力不大于PN25，公称尺寸DN8~DN100，工作温度-20°C~65°C，工作介质为硫化氢含量不大于20 mg/m3的煤气、天然气、液化石油气及其混合气，燃气管道用铜制球阀和截止阀(以下简称阀门)。
Copper ball valves and globe valves for gas pipeline engineering
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2013-04-25
- 实施
- 2013-09-01
This European Standard deals with metal isolating valves used for gas distribution systems with maximum operating pressure up to 16 bar, and which operate with fuel gases of the first, the second and the third family, in accordance with EN 437.The types o
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
- ICS
- 23.060.01
- CCS
- 发布
- 2013-04-18
- 实施
- 2013-04-18
This International Standard specifies fire type-testing requirements and a fire type-test method for confirming the pressure-containing capability of a valve under pressure during and after the fire test. It is not applicable to the testing requirements for valve actuators other than manually operated gear boxes or similar mechanisms when these form part of the normal valve assembly. Other types of valve actuators (e.g. electrical, pneumatic or hydraulic) can need special protection to operate in the environment considered in this valve test, and the fire testing of such actuators is outside the scope of this International Standard. Fire test certificates of valves previously tested according to previous editions of ISO 10497 and to similar internationally recognized fire test standards are also acceptable
Testing of valves -- Fire type-testing requirements
- ICS
- 23.060.01
- CCS
- 发布
- 2013-04-01
- 实施
