23.060.01 阀门综合 标准查询与下载
共找到 868 条与 阀门综合 相关的标准，共 58 页
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version EN 12266-1:2012
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2012-06-01
- 实施
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
- ICS
- 23.060.01
- CCS
- 发布
- 2012-05-31
- 实施
- 2012-05-31
This European Standard specifies the face to face (FTF) and centre to face (CTF) dimensions for PN and Class designated metal valves used in flanged pipe systems.This standard covers valves with the following PN, Class and DN values:- PN 2,5; PN 6; PN 10;
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
- ICS
- 23.060.01
- CCS
- 发布
- 2012-05-25
- 实施
- 2012-05-25
本标准规定了阀锁的术语和定义、分类、材料、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于工作环境温度-60℃～80℃，安装在各类管道阀门上具有机械连锁功能的阀锁。
Valve interlock
- ICS
- 23.060.01
- CCS
- Y71
- 发布
- 2012-05-24
- 实施
- 2012-11-01
Industrial valves - Testing of metallic valves - Part 1 : pressure tests, test procedures and acceptance criteria - Mandatory requirements.
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2012-05-01
- 实施
- 2012-05-18
This Standard applies to automatic compensating valves intended to be installed at the point of use, where the user has access to flow or final temperature controls, and where no further mixing occurs downstream of the device. This Standard covers automatic compensating valves intended to control the water temperature to wall or ceiling mounted (a) hand-held showers; (b) shower heads; (c) body sprays either in individual shower or tub/shower combination fittings; and (d) tub spouts when part of tub/shower combination fittings.
Performance Requirements for Automatic Compensating Valves for Individual Showers and Tub/Shower Combinations
- ICS
- 23.060.01
- CCS
- Q81
- 发布
- 2012-05-01
- 实施
Performance Requirements for Automatic Compensating Valves for Individual Showers and Tub/Shower Combinations
- ICS
- 23.060.01
- CCS
- Q81
- 发布
- 2012-05
- 实施
Industrial valves - Test of flow resistance using water as test fluid
- ICS
- 23.060.01
- CCS
- 发布
- 2012-04-30
- 实施
- 2012-04-30
Industrial valves. Testing of metallic valves. Pressure tests, test procedures and acceptance criteria. Mandatory requirements
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2012-04-30
- 实施
- 2012-04-30
This European Standard specifies a method for determining valve pressure loss coefficient and fluid flow coefficient using water as test fluid. This method is suitablefor valves with low zeta values but higher than 0,1 by determining pressure loss, with r
Industrial valves - Test of flow resistance using water as test fluid
- ICS
- 23.060.01
- CCS
- 发布
- 2012-04-20
- 实施
- 2012-04-20
This European Standard specifies requirements for tests, test procedures and acceptance criteria for production testing of industrial valves made of metallic materials. The specified tests may also be used as type tests or acceptance tests. Safety devices are not covered by EN 12266-1. When specified as a normative reference in a valve product or performance standard, this European Standard is to be considered in conjunction with given specific requirements of the valve product or performance standard. Where requirements in a product or performance standard differ from those given in this European Standard, the requirements of the product or performance standard apply. NOTE For testing of industrial valves of thermoplastic materials, ISO 9393-1 and ISO 9393-2 apply.
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
- ICS
- 23.060.01
- CCS
- 发布
- 2012-04-01
- 实施
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements; German version EN 12266-2:2012
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2012-04-01
- 实施
Industrial valves - Test of flow resistance using water as test fluid; German version EN 1267:2012
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2012-04-01
- 实施
Industrial valves - Test of flow resistance using water as test fluid.
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2012-03-01
- 实施
- 2012-03-01
Industrial valves. Testing of metallic valves. Tests, test procedures and acceptance criteria. Supplementary requirements
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2012-02-29
- 实施
- 2012-02-29
This European Standard specifies supplementary requirements for tests, test procedures and acceptance criteria of industrial valves made of metallic materials. The specified tests may be used as type tests, production tests or acceptance tests. The application of these tests is specified in the appropriate product or performance standards. When specified as a normative reference in a valve product or performance standard,This European Standard should be considered in conjunction with given specific requirements of the valve product or performance standard. Where requirements in a product or performance standard differ from those given inThis European Standard, the requirements of the product or performance standard apply. NOTE For testing of industrial valves of thermoplastic materials, ISO 9393-1 and ISO 9393-2 apply.
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
- ICS
- 23.060.01
- CCS
- 发布
- 2012-02-01
- 实施
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves.
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2012-02-01
- 实施
Industrial valves. Test of flow resistance using water as test fluid
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2012-01-31
- 实施
- 2012-01-31
This European Standard specifies a method for determining valve pressure loss coefficient and fluid flow coefficient using water as test fluid.This method is suitable for valves with low zeta values but higher than 0,1 by determining pressure loss, with respect to fluid flow rate and specific gravity, and for valves with equal inlet and outlet nominal size. Industrial process control valves are excluded fromThis European Standard. NOTE 1 For zeta values above 6, the pressure loss coefficient inaccuracy is higher than the pressure loss caused by the test tubes. It becomes the same configuration of tests as in EN 60534-2-3. NOTE 2 If using air as test fluid, other standards e. g. EN 60534-2-3 and ISO 6358 should be referred to.
Industrial valves - Test of flow resistance using water as test fluid
- ICS
- 23.060.01
- CCS
- 发布
- 2012-01-01
- 实施
Pipeline valves for objects of energetics. General specifications
- ICS
- 23.060.01
- CCS
- 发布
- 2012
- 实施
- 2013-05-01
