23.060.01 阀门综合 标准查询与下载
共找到 868 条与 阀门综合 相关的标准，共 58 页
Pipeline valves. Multiplayer metal bellows. General specifications
- ICS
- 23.060.01
- CCS
- 发布
- 2012
- 实施
- 2013-05-01
Valve proving systems for automatic shut-off valves for gas burners and gas appliances
- ICS
- 23.060.01
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
Gas/air controls for gas burners and gas burning appliances. Part 1. Pneumatic types
- ICS
- 23.060.01
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
Gas/air controls for gas burners and gas burning appliances. Part 2. Electronic types
- ICS
- 23.060.01
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
Safety and control devices for gas burners and gas burning appliances. General requirements
- ICS
- 23.060.01
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods
- ICS
- 23.060.01
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
Pressure sensing pneumatic devices for gas burners and appliances
- ICS
- 23.060.01
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
Specifies criteria for materials, design parameters, marking and testing for valves and strainers. The standard applies to shut off valves, control valves and stainers designed and manufactured for used in closed circuit refrigerating systems where ammonia is used as the refrigerant.
Ammonia Refrigeration Valves
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2012
- 实施
This International Standard specifies tests applicable to automatic steam traps. These tests, which are hereafter referred to as production tests and Performance characteristic tests, may be conducted to ensure the correct functioning of a steam trap or to evaluate the Performance of a particular design. This International Standard specifies the tests to be performed relative to each one of these two categories and describes briefly the corresponding test methods.
Automatic steam traps - Production and performance characteristic tests
- ICS
- 23.060.01
- CCS
- 发布
- 2011-10-12
- 实施
This International Standard specifies two test methods to determine the discharge capacity of automatic steam traps to ISO 6552.
Automatic steam traps -- Determination of discharge capacity - Test methods
- ICS
- 23.060.01
- CCS
- 发布
- 2011-10-12
- 实施
This International Standard specifies two test methods to determine the steam loss of automatic steam traps to ISO 6552. The Object of these tests is to determine the amount of live steam, if any, that is lost through the steam trap. They are, therefore, tests to evaluate the ability of the traps to shut against steam during successive operations. There is no measurement of the total heat energy lost by the trap. Such total heat loss would include radiation and convection components which tan be established separately.
Automatic steam traps – Determination of steam loss – Test methods
- ICS
- 23.060.01
- CCS
- 发布
- 2011-10-12
- 实施
The purpose of this International Standard is to establish a simple classification of the main types of automatic steam traps according to the mode of actuation of their obturation device and disregarding their details of conception and construction.
Automatic steam traps -- Classification
- ICS
- 23.060.01
- CCS
- 发布
- 2011-10-12
- 实施
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
- ICS
- 23.060.01
- CCS
- 发布
- 2011-06-17
- 实施
- 2011-06-17
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German and English version EN 488:2011
- ICS
- 23.060.01
- CCS
- Q83
- 发布
- 2011-06
- 实施
JB/T 1308的本部分规定了超高压阀门、管件和紧固件的技术条件。 本部分适用于公称压力PN 2500、公称尺寸为DN3～DN25,介质为乙烯、聚乙烯等非腐蚀性介质的锻造钢制阀门、管件和紧固件。
PN 2500 ultrahigh pressure valves and fittings.Part 2:Valves,fittings and fasteners
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2011-05-18
- 实施
- 2011-08-01
JB/T 1308的本部分规定了超高压阀门用双头螺柱形式、尺寸和技术要求。 本部分适用于公称压力PN2500的乙烯、聚乙烯等非腐蚀性介质的锻造钢制阀门的双头螺柱。
PN 2500 ultrahigh pressure valves and fittings.Part 14:Stud bolts
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2011-05-18
- 实施
- 2011-08-01
JB/T 1308的本部分规定了超高压阀门用阶端双头螺柱形式、尺寸和技术要求。 本部分适用于公称压力PN2500、公称尺寸为DN15～DN25的乙烯、聚乙烯等非腐蚀性介质的锻造钢制阀门的阶端双头螺柱。
PN 2500 ultrahigh pressure valves and fittings.Part 15:Stud bolts at boss
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2011-05-18
- 实施
- 2011-08-01
JB/T 1308的本部分规定了超高压阀门用螺母形式、尺寸和技术要求。 本部分适用于公称压力PN2500的乙烯、聚乙烯等非腐蚀性介质的锻造钢制阀门的螺母
PN 2500 ultrahigh pressure valves and fittings.Part 16：Nuts
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2011-05-18
- 实施
- 2011-08-01
JB/T 1308的本部分规定了超高压阀门用异径管形式、尺寸和技术要求。 本部分适用于公称压力PN2500、公称尺寸为DN3～DN25的乙烯、聚乙烯等非腐蚀性介质的锻造钢制阀门的异径管。
PN 2500 ultrahigh pressure valves and fittings.Part 17:Reduced pipes
- ICS
- 23.060.01
- CCS
- J16
- 发布
- 2011-05-18
- 实施
- 2011-08-01
