23.060.01 阀门综合 标准查询与下载

T/WZBF 061-2024 充气密封平板闸阀

本标准规定了充气密封平板闸阀的术语和定义、结构型式和参数、要求、试验方法、检验规则、标志、包装及贮运要求。

Inflatable sealed flat gate valve

T/WZBF 059-2024 多相输送硬密封球阀

本标准规定了法兰连接、焊接连接及螺纹连接多相输送硬密封球阀(以下简称“球阀”)的术语、结构形式、技术要求、材料、装配与调试、试验方法、检验规则、标记、铭牌及供货要求。

Multiphase conveying hard sealed ball valve

24/30444461 DC 工业阀门 逸散性排放的测量、试验和鉴定程序 阀门阀杆密封件型式试验的分类系统和鉴定程序

BS EN ISO 12101 Industrial valves. Measurement, test and qualification procedures for fugitive emissions - Classification system and qualification procedures for type testing of stem seals for valves

T/QGCML 4287-2024 压力调节阀通用技术规范

本文件规定了压力调节阀通用技术规范的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于压力调节阀的生产和检验。

General technical specification for pressure regulating valve

T/QGCML 4159-2024 压力维持阀通用技术规范

本文件规定了压力维持阀通用技术规范的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于压力维持阀的生产和检验。

General technical specifications for pressure maintenance valves

T/QGCML 4160-2024 油温控制阀通用技术规范

本文件规定了油温控制阀通用技术规范的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于油温控制阀的生产和检验。

General technical specifications for oil temperature control valves

GSO EN 12201-4:2024 供水、排水和压力污水处理用塑料管道系统 聚乙烯 (PE) 第4部分：阀门

This Part of EN 12201 specifies the characteristics of valves or valve bodies made from polyethylene (PE 100 and PE 80) for buried and above ground applications, intended for the conveyance of water for human consumption, raw water prior to treatment, drainage and sewerage under pressure, vacuum sewer systems, and water for other purposes. NOTE 1 For valves or valve bodies intended for drainage and sewerage under pressure, additional specifications/tests may be necessary according to the requirements of the purchaser, especially for the chemical resistance of the components in contact with the fluids and functioning characteristics. NOTE 2 For PE components intended for the conveyance of water for human consumption and raw water prior to treatment attention is drawn to 5.4. Components manufactured for water for other purposes may not be suitable for water supply for human consumption. It also specifies the test parameters for the test methods referred to in this European Standard. NOTE 3 Valves made from material other than polyethylene (PE) designed for the supply of water intended for human consumption to a relevant standard(s) can be used in PE piping systems conforming to EN 12201 when they have relevant PE connection for butt fusion or electrofusion ends (see EN 12201-3:2011). In conjunction with Parts 1, 2, 3 and 5 of EN 12201 it is applicable to PE valves, their joints and to joints with components of PE and other materials intended to be used under the following conditions: a) allowable operating pressure, PFA, up to 25 bar ) b) an operating temperature of 20 °C as a reference temperature; c) buried in the ground; d) sea outfalls; e) laid in water; f) above ground, including pipes suspended below bridges. NOTE 4 For applications operating at constant temperature greater than 20 °C and up to 40 °C, see EN 12201 1:2011, Annex A. EN 12201 covers a range of allowable operating pressures and gives requirements concerning colours and additives. NOTE 5 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national guidance or regulations and installation practices or codes. This Part of EN 12201 covers valves for pipes with a nominal outside diameter dn ≤ 315 mm.

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves

GSO BS 1212-2:2024 浮子操作阀 第2部分：隔膜式浮子操作阀（铜合金阀体）规范（浮子除外）

  Scope is not provided for this standard

Float operated valves - Part 2: Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)

GSO BS 1212-1:2024 浮子控制阀 第1部分：活塞式浮子控制阀（铜合金阀体）（不包括浮子）规范

  Scope is not provided for this standard

Float operated valves - Part 1: Specification for piston type float operated valves (copper alloy body) (excluding floats)

GSO ISO 28921-1:2024 工业阀门 低温应用隔离阀 第1部分：设计、制造和生产测试

This document specifies requirements for design, dimensions, material, fabrication and production testing of gate, globe, ball/plug and butterfly valve design types used as isolation valves and check valves for low-temperature applications. This document is applicable to isolation valves for use in low and cryogenic temperature service where the design low-temperature service is -50 °C down to –196 °C. This document does not apply to valves for cryogenic services, designed in accordance with ISO 21011, used with cryogenic vessels. Where the requirements of this document vary from those given in the valve product standards, the requirements of this document apply. This document is applicable to valves with body, bonnet, bonnet extension or cover made of metallic materials. This document is applicable to: —    valves of nominal sizes DN: 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500; 600; 650; 700; 750; 800; 850; 900; 950; 1 000; 1 050; 1 200; 1 350; 1 400; 1 500; 1 600; 1 650; 1 800, —    corresponding to nominal pipe sizes NPS: ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 26; 28; 30; 32; 34; 36; 38; 40; 42; 48; 54; 56; 60; 64; 66; 72, and applies to pressure designations: —    PN 16; 25; 40; 100; 160; 250; 400, —    Class 150; 300; 600; 800; 900; 1 500; 2 500. NOTE       Not all type and size combination are available in all pressure ratings. This document does not apply to safety valves and control valves.

Industrial valves — Isolating valves for low-temperature applications — Part 1: Design, manufacturing and production testing

GSO BS 1212-3:2024 浮子操作阀 第3部分：仅用于冷水服务的隔膜式浮子操作阀（塑料阀体）（不包括浮子）的规范

  Scope is not provided for this standard

Float operated valves - Part 3: Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats)

GSO BS 2456:2024 冷水服务用浮子操作阀的浮子（塑料）

  Scope is not provided for this standard

Floats (plastics) for float operated valves for cold-water services

T/WZBF 046-2024 氯气用波纹管截止阀

本文件规定了氯气用波纹管截止阀的术语和定义、结构形式、技术要求、检验和试验方法、检验规则以及标志、涂漆、包装和储运。 本文件适用于公称压力不大于PN40，压力等级不大于Class300，工作温度为-46℃~ 120℃，适用介质为液态或气态氯的带波纹管密封的法兰连接氯气用波纹管截止阀（一下简称“阀门”）的制造。 注：公称尺寸为DN15~DN150或NPS?~NPS6的氯气用波纹管截止阀适用于液态氯；公称尺寸为DN15~DN400或NPS?~NPS16的氯气用波纹管截止阀适用于气态氯。

Bellows stop valve for chlorine gas

T/WZBF 052-2024 铜制和不锈钢螺纹连接阀门

本文件规定了铁制和铜制螺纹连接的闸阀、截止阀、球阀、止回阀的分类、材料、要求、试验方法、 检验规则、标志、包装、运输及贮存。 公称压力不大于PN40、公称尺寸不大于DN100的铜合金阀门和不锈钢阀门。 工作温度不高于180℃，工作介质为水、非腐蚀性液体、空气、饱和蒸汽等。

Brass and stainless steel threaded connection valves

T/WZBF 050-2024 部分回转阀门驱动装置的连接

本文件规定了与工业阀门相连的部分回转驱动装置连接的相关要求。  包括： —— 与工业阀门相连接（参见图 1a 和 1c）或中间连接支承相连接（参见图 1b 和 1d）的部分回转驱动装置所必需的法兰尺寸； —— 与被驱动件相连接所必需的部分回转驱动装置驱动件结构形式及尺寸； —— 与工业阀门直接连接的法兰连接面尺寸和连接法兰的转矩参考值。

Part-turn valve drive connections

T/WZBF 049-2024 通用阀门 不锈钢铸件技术条件

本文件规定了通用阀门不锈钢铸件的技术要求、试验方法和检验规则、标志和质量证明书以及附加要求。  本文件适用于奥氏体不锈钢承压铸件。

General valves stainless steel casting technical conditions

T/WZBF 045-2024 盘阀

本标准规定了盘阀的术语和定义、型号编制方法、结构形式、技术要求、材料、检验方法、检验规 则、标志、供货要求。 本文件适用于公称压力为PN16～PNI60、公称尺寸为DN25～DN600，或压力等级为C1assI50 ～class900、公称尺寸为NPS 1～NPS24 ，使用温度为-29℃ ～538℃ ，端部连接形式为法兰，介质为气、液、固或多相混合盘阀的制造。

disc valve

T/WZBF 051-2024 多回转阀门驱动装置的连接

本文件规定了与阀门相连的多回转或直行程驱动装置连接的相关要求： —— 与工业阀门（参见图 1a）或中间支承相连接（参见图 1b）的多回转驱动装置所必需的法兰尺寸； —— 与被驱动件相连接所必需的多回转驱动装置驱动件结构形式及尺寸； —— 与工业阀门直接连接的法兰连接面尺寸和连接法兰的转矩和推力的参考值。

Connection of multi-turn valve drives

T/WZBF 047-2024 活塞式调流阀

本文件规定了活塞式调流阀的术语和定义、结构型式、型号、参数、技术要求、试验方法、检验规则、标志、以及包装、防护和贮存等要求。 本文件适用于公称压力为PN6～PN25、公称尺寸为DN100～DN2000，介质温度为0～80℃，工作介质为水的活塞式调流阀的制造。

Piston flow regulating valve

T/WZBF 042-2024 氧气用球阀

本文件规定了法兰连接氧气用球阀的术语和定义、结构型式、技术要求、材料、试验方法、检验规则、质量证明文件、标志、包装和供货以及订货要求。 本文件适用于工作压力不大于21 MPa，公称尺寸DN15～DN600（NPS1/2～NPS24）,氧气介质温度为-30oC～200oC、露点不高于-30℃、体积分数大于23.5%(其他气体为不活泼的气体）的氧气用球阀的制造。

Ball valve for oxygen