23.100.20 缸 标准查询与下载

NF E49-036:2009 启动液压传动.1000千帕(10巴)系列液压筒.连杆端U形环的安装尺寸

Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end clevis.

NF E48-030:2009 液压动力系统和组件.圆筒.安装尺寸和安装类型的识别码

Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types.

BS ISO 6099:2009 液压动力系统和组件.汽缸.安装尺寸规格和安装类型的识别规则

Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types

ISO 6099:2009 液体动力系统和部件.汽缸.安装尺寸和安装类型的标识码

This International Standard establishes a convention for the identification of mounting dimensions and types used in the mounting of fluid power cylinders. It specifies a code for identifying cylinder mounting, envelope, accessory and connector dimensions, and for cylinder mounting and accessory types. This International Standard does not represent a standard list of all fluid power cylinder mounting and accessory types.

Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types

ISO 8139:2009 气压流体动力.1000kPa(10bar)系列汽缸.杆端球眼的安装尺寸

This International Standard specifies the mounting dimensions required for interchangeability of rod-end spherical eyes of pneumatic cylinders. The rod-end spherical eyes have been designed specifically for use with 1 000 kPa [10 bar 1 )] series cylinders manufactured in accordance with ISO 6430, ISO 6432 and ISO 15552, but this does not limit their application. The spherical bearing end eyes are used on piston rods of pneumatic cylinders for mechanically transmitting the cylinder force under oscillatory rotational and tilting movements. The design of the rod-end spherical eyes is based on the maximum forces resulting from the specified internal diameter of the cylinders and pressure according to ISO 6430, ISO 6432 and ISO 15552.

Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes

ISO 8140:2009 气压流体动力.1000kPa(10bar)系列汽缸.杆端Ｕ形夹的安装尺寸

This International Standard specifies the mounting dimensions required for interchangeability of rod-end clevises of pneumatic cylinders. The rod-end clevises have been designed specifically for use with 1 000 kPa [10 bar1)] series cylinders manufactured in accordance with ISO 6430, ISO 6432 and ISO 15552, but this does not limit their application. The clevises are used on piston rods of pneumatic cylinders for mechanically transmitting the cylinder force. The design of the clevises is based on the maximum forces resulting from the specified internal diameter of the cylinders and pressure according to ISO 6430, ISO 6432 and ISO 15552.

Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises

DIN ISO 6195:2009 流体动力系统和元件.往复作用的活塞杆刮垢环罩.尺寸和公差

This International Standard specifies dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders. The range of rod diameters is from 4 mm to 360 mm. This International Standard is applicable to the following four housing designs. -- Type A: recessed housings with undercut or separate cover to retain elastomeric wipers (these are the preferred housings for single lip wipers without integral rigid enforcement). -- Type B: open recessed housings for wipers with integral rigid enforcement, that are a press-fit in the housing. -- Type C: recessed housings with undercut to retain elastomeric wipers (these are the preferred housings for double lip wipers without integral rigid enforcement). ' Type D: recessed housings with undercut to retain elastomer-energized, plastic-faced wipers. This International Standard does not otherwise specify the style, configurations, materials, or performance ratings for the wiper ring.

Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances (ISO 6195:2002); English version of DIN ISO 6195:2009-03

JIS B 8367-6:2008 液压汽缸的安装尺寸.第6部分:单杆.10MPa系列、短冲程汽缸(汽缸内径32mm～100mm)

Mounting dimensions for hydraulic cylinders -- Part 6 : Single rod -- 10 MPa series, short-stroke cylinders (Bores from 32 mm to 100 mm)

JIS B 8367-4:2008 液压汽缸的安装尺寸.第4部分:单杆.25MPa系列、焊接或螺纹法兰的圆盖型液压气缸(气缸内径50mm～320mm)

Mounting dimensions for hydraulic cylinders -- Part 4 : Single rod -- 25 MPa series, round cover types with welded or threaded flange (Bores from 50 mm to 320 mm)

ISO 6020-2:2006/cor 1:2008 液压流体动力.16 MPa(160 bar)系列单杆汽缸用安装尺寸.第2部分:紧凑型系列.技术勘误表1

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2: Compact series; Technical Corrigendum 1

JB/T 7373-2008 齿轮齿条摆动气缸

本标准规定了齿轮齿条摆动气缸的术语和定义、图形符号、技术要求、试验方法、检验规则及其商务文件中应包含的信息。 本标准适用于以压缩空气为介质，气动系统中使用的齿轮齿条摆动气缸（以下简称气缸）。

Gear-rack pendular cylinders

DIN ISO 8132:2008 液压传动.16MPa(160bar)中型和25MPa(250bar)系列单杆汽缸.附件的安装尺寸

This International Standard lays down the mounting dimensions required for the interchangeability of accessories for the 16 MPa [160 bar1)] medium series cylinders in accordance with ISO 6020-1 and for the 25 MPa (250 bar) series cylinders in accordance with ISO 6022. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-1 and ISO 6022, but this does not limit their application. This International Standard covers the following accessories, identified in accordance with ISO 6099: -- AP2 -- rod clevis, female thread (see Figure 1 and Table 1); -- AF3 -- rod flange, circular (see Figure 2 and Table 2); -- AB4 -- clevis bracket, straight (see Figure 3 and Table 3); -- AB3 -- clevis bracket, in angle (see Figure 4 and Table 4); -- AT4 -- trunnion bracket (see Figure 5 and Table 5); -- AA8 -- pivot pin, plain or spherical bearing (cotter pin or snap ring type) (see Figure 6 and Table 6); -- AP6 -- rod eye spherical, female thread (see Figure 7 and Table 7); -- AP4 -- rod eye plain, female thread (see Figure 8 and Table 8). These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 3322. This International Standard applies only to the dimensional criteria of products manufactured in conformity with this International Standard; it does not apply to their functional characteristics.

Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Mounting dimensions for accessories (ISO 8132:2006);English version of DIN ISO 8132:2008-06

DIN ISO 8133:2008 液压传动.16MP(160bar)紧凑式系列单杆汽缸.附件的安装尺寸

This International Standard specifies the mounting dimensions required for interchangeability of accessories for 16 MPa [160 bar 1)] compact cylinders conforming to ISO 6020-2. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-2, but this does not limit their application. This International Standard covers the following accessories, identified in accordance with ISO 6099: -- AP6: rod eye spherical, female thread (see Figure 1 and Table 1) -- AB5: clevis bracket, spherical eye, in angle (see Figure 2 and Table 2) -- AA7: pivot pin, spherical bearing, locking plate (see Figure 3 and Table 3) -- AL7: locking plate for pivot pin (see Figure 4 and Table 4) -- AP2: rod clevis, female thread (see Figure 5 and Table 5) -- AP4: rod eye plain, female thread (see Figure 6 and Table 6) -- AB2: eye bracket (see Figure 7 and Table 7) -- AB4: clevis bracket, straight (see Figure 8 and Table 8) -- AA4: pivot pin, plain (cotter pin or snap ring type) (see Figure 9 and Table 9) -- AT4: trunnion bracket (see Figure 10 and Table 10) These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO $322. This International Standard only applies to the dimensional criteria of products manufactured in conformity with this International Standard; it does not apply to their functional characteristics.

Hydraulic fluid power - Single rod cylinders, 16 MP (160 bar) compact series - Mounting dimensions for accessories (ISO 8133:2006);English version of DIN ISO 8133:2008-06

DIN ISO 6022:2008 液压传动.25MPa(250巴)系列单杆汽缸的安装尺寸

This International Standard establishes mounting dimensions for hydraulic cylinders for use at 25 MPa [250 bari)I, as required for interchangeability of these cylinders. NOTE This International Standard allows manufacturers of hydraulic equipment flexibility in the design of 25 MPa (250 bar) cylinders and does not restrict technical development; however, it does provide basic guidelines.

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series (ISO 6022:2006);English version of DIN ISO 6022:2008-06

BS ISO 13726:2008 液压流体动力.内径为250 mm至500 mm的16 MPa(160 bar)紧凑式系列单杆汽缸.附件安装尺寸规格

ISO 13726:2008 specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-3. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-3, but this does not limit their application. ISO 13726:2008 covers the following accessories: AP2 – rod clevis, female thread (see Figure 1 and Table 1); AP4 – rod eye, plain, female thread (see Figure 2 and Table 2); AA4 – L – pivot pin (locking plate) (see Figure 3 and Table 3); AL6 – locking plate for pivot pin (see Figure 4 and Table 4); AA4 – S – plain pivot pin (see Figure 5 and Table 5).

Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions

ISO 13726:2008 液压传动.16MPa(160bar)、缸径250mm～500mm小型系列单杆缸.附件安装尺寸

Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions

DIN ISO 8140:2008 气动流体动力.101000kPa(10bar)系列气缸.活塞杆U形夹.安装尺寸

This International Standard specifies the mounting dimensions required for interchangeability of rod end clevis of pneumatic cylinders. The rod end clevis have been designed specifically for use with 1000 kPa [10 bar)] series cylinders manufactured in accordance with ISO 6430, ISO 6431 and ISO 6432 but this does not limit lheir application. The clevis are used on piston rods of pneumatic cylinders for mechanically transmitting the cylinder force. The design of the clevis is based on the maximum forces resulting from the specilied internal diameter of the cylinders and pressure ac- cording to ISO 6430, ISO 6431 and ISO 6432.

Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Rod end clevis - Mounting dimensions (ISO 8140:1991); English version of DIN ISO 8140-2008-01

DIN ISO 8139:2008 气动流体动力.10kPa(10bar)系列气缸.杆端球面孔.安装尺寸

This International Standard specifies the mounting dimensions required for interchangeability of rod end spherical eyes of pneumatic cylinders. The rod end spherical eyes have been designed specifically for use with 1000 kPa [10 bart)] series cylinders manufactured in accordance with ISO 6430, ISO 6431 and ISO 6432 but this does not limit their application. The spherical bearing end eyes are used on piston rods of pneumatic cylinders for mechanically trans- mitting the cylinder force under oscillatory rotational and titling movements. The design of the rod end spherical eyes is based on the maximum forces re- sulting from the specified internal diameter of the cylinders and pressure according to ISO6430, ISO 6431 and ISO 6432.

Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Rod end spherical eyes - Mounting dimensions (ISO 8139:1991); English version of DIN ISO 8139-2008-01

ANSI/AWWA C541-2008 阀门和滑动闸用水压、气压缸和Vane型制动器

This standard describes hydraulic and pneumatic cylinder and vane-type actuators for operation of valve and slide gates in utility systems.

Hydraulic and Pneumatic Cylinder and Vane-Type Actuators for Valves and Slide Gates

BS ISO 6020-1:2007 液压传动.16MPa(160bar)系列单杆气缸的安装尺寸.中型系列

This part of ISO 6020 establishes metric mounting dimensions for medium series cylinders, 16 MPa [160 bar 1)], as required for interchangeability of commonly used hydraulic cylinders. The medium series dimensions are applicable to round head cylinders with bores from 25 mm to 200 mm and to both round and square head cylinders with bores larger than 200 mm, thus allowing a wider range of applications.

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Medium series