23.100.20 缸 标准查询与下载

NF E48-015*NF ISO 6020-1:2007 液压传动.16MPa(160bar)系列单杆液压缸的安装尺寸.第1部分:中型系列

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1 : medium series.

ISO 6020-1:2007 液压流体传动.16MPa(160bar)系列单杆气缸的安装尺寸.第1部分:中型系列

This part of ISO 6020 establishes metric mounting dimensions for medium series cylinders, 16 MPa [160 bar 1)], as required for interchangeability of commonly used hydraulic cylinders. The medium series dimensions are applicable to round head cylinders with bores from 25 mm to 200 mm and to both round and square head cylinders with bores larger than 200 mm, thus allowing a wider range of applications.

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series

JB/T 7377-2007 缸内径32～250mm整体式安装单杆气缸 安装尺寸

本标准规定了最高工作压力为1MPa、缸内径为32mm～250mm整体式安装单杆气缸的安装尺寸，从而达到产品互换性的要求。

Single rod cylinders with integral mountings, bores form 32mm to 250mm. Mounting dimensions

JB/T 6379-2007 缸内径32～320mm可拆式安装单杆气缸 安装尺寸

本标准规定了最高工作压力为1MPa、缸内径为32mm～320mm可拆式安装单杆气缸的安装尺寸，从而达到产品互换性的要求。

Single rod cylinders with detachable mountings, bores from 32mm to 320mm Mounting dimensions

JB/T 2162-2007 冶金设备用液压缸(PN≤16MPa)

本标准规定了公称压力PN≤16MPa的冶金设备用液压缸的基本参数、型式与尺寸和技术条件。 本标准适用于公称压力PN≤16MPa、环境温度为-20℃～80℃的冶金设备用液压缸。

Hydraulic cylinders for metallurgical equipment (PN≤16MPa)

JB/T 1444-2007 冶金设备用气缸 型式与尺寸

本标准规定了冶金设备用气缸的结构尺寸与型式分类。 本标准适用于最高工作压力为0.63MPa，周围介质温度为5℃～60℃，气缸活塞工作速度为50mm/s～500mm/s的双动式气缸。

Pneumatic cylinders for metallurgical equipment Types and dimensions

NF E48-037:2006 液压传动.液压缸.活塞及连杆用矩形截面轴承环的外壳尺寸

Hydrolic fluid power - Cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods.

JB/T 6134-2006 冶金设备用液压缸(PN≤25MPa)

本标准规定了公称压力PN≤5MPa的冶金设备用液压缸的基本参数、型式与尺寸和技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于公称压力PN≤5MPa、环境温度为-20℃～80℃的冶金设备用液压缸。

Hydraulic cylinders for metallurgical equipment

JIS B 8366-5:2006 流体动力系统和元件.安装尺寸和安装类型的识别码

この規格は，油圧及び空気圧シリンダの取付寸法及び取付形式に与える識別記号を定めるシステムについて規定する。

Fluid power systems and components -- Cylinders -- Identification code for mounting dimensions and mounting types

NF E48-503:2006 液压传动.16 MPa(160 bar)小型系列的单杆汽缸.附件安装尺寸

Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series - Mounting dimensions for accessories.

NF E48-016:2006 液压传动.16 MPa(160 bar)系列的单杆汽缸安装尺寸.第2部分:小型系列

Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2 : compact series.

NF E48-501:2006 液压传动.16 MPa (160 bar)中型和25 MPa (250 bar)系列的单杆汽缸.附件安装尺寸

Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Mounting dimensions for accessories.

KS B ISO 21287-2006(2011) 气动流体动力－气缸－紧凑型气缸 1000千帕（10巴）系列 孔从20毫米到100毫米

Pneumatic fluid power－Cylinders－Compact cylinders,1 000 kPa(10 bar) series, bores from 20 mm to 100 mm

KS B ISO 7425-1-2006(2016) 液压传动 - 壳弹性体为通电 塑料面密封件 - 尺寸和公差 - 第1部分:活塞密封

Hydraulic fluid power － Housings for elastomer－energized, plastic－faced seals － Dimensions and tolerances － Part 1: Piston seal housings

KS B ISO 3320-2006(2011) 流体动力系统和部件缸孔和活塞杆直径米制系列

Fluid power systems and components－Cylinder bores and piston rod diameters－Metric series

KS B ISO 7180-2006(2011) 气缸气口螺纹

Pneumatic fluid power－Cylinders－Bore and port thread sizes

KS B ISO 6547-2006(2011) 液压传动－缸－带轴承环的活塞密封套－尺寸和公差

Hydraulic fluid power－Cylinders－Piston seal housings incorporating bearing rings－Dimensions and tolerances

KS B ISO 6195-2006(2016) 流体动力系统和组件 - 汽缸杆擦拭器环在外壳往复应用 - 尺寸和公差

Fluid power systems and components －Cylinder－rod wiper－ring housings in reciprocating applications －Dimensions and tolerances

KS B ISO 7425-1:2006 液压传动.弹性体赋能塑料面密封沟槽.尺寸和公差.第1部分:活塞密封沟槽

이 규격은 상호 연관된 탄성중합체 에너지원 하우징, 플라스틱 면으로 된 실(seal)에 편

Hydraulic fluid power－Housings for elastomer－energized, plastic－faced seals－Dimensions and tolerances－Part 2：Rod seal housings

KS B ISO 7425-1-2006(2021) 液压传动弹性体通电塑料端面密封外壳尺寸和公差第1部分:活塞密封外壳

Hydraulic fluid power － Housings for elastomer－energized, plastic－faced seals － Dimensions and tolerances － Part 1: Piston seal housings