23.100.20 缸 标准查询与下载

T/CASME 422-2023 推杆式伺服电动缸

本文件规定了推杆式伺服电动缸的设计要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Pusher type servo electric cylinder

BS ISO 8132:2022 液压流体动力 单杆气缸附件安装尺寸 16 MPa(160bar)中型和 25 MPa(250bar)系列

1   Scope This document specifies the mounting dimensions required for the interchangeability of accessories for 16 MPa (160 bar) medium series cylinders in accordance with ISO 6020‑1 and for 25 MPa (250 bar) series cylinders in accordance with ISO 6022. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020‑1 and ISO 6022, but this does not limit their application 1 . This document covers the following accessories, identified in accordance with ISO 6099: — AP2 — rod clevis, female thread (see Figure 1 and Table 1); — AF3 — rod flange, circular (see Figure 2 and Table 2); — AB4 — clevis bracket, straight (see Figure 3 and Table 3); — AB3 — clevis bracket, in angle (see Figure 4 and Table 4); — AT4 — trunnion bracket (see Figure 5 and Table 5); — AA4-R — pivot pin, plain bearing (snap ring type) (see Figure 6 and Table 6); — AA4-S — pivot pin, plain bearing (split pin type) (see Figure 7 and Table 7); — AA6-R — pivot pin, spherical bearing (sna...

Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series

BS ISO 8133:2022 液压流体动力 单杆气缸附件安装尺寸 16 MPa(160bar)紧凑型系列

1   Scope This document specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-2. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-2, but this does not limit their application 1 . This document covers the following accessories, identified in accordance with ISO 6099: — AP6 — rod eye spherical, female thread (see Figure 1 and Table 1); — AB5 — clevis bracket, spherical eye, in angle (see Figure 2 and Table 2); — AA6-L — pivot pin, spherical bearing, locking plate (see Figure 3 and Table 3); — AL6 — locking plate for pivot pin (see Figure 4 and Table 4); — AP2 — rod clevis, female thread (see Figure 5 and Table 5); — AP4 — rod eye plain, female thread (see Figure 6 and Table 6); — AB2 — eye bracket (see Figure 7 and Table 7); — AB4 — clevis bracket, straight (see Figure 8 and Table 8);

Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series

ISO 8133:2022 液压传动.16MPa（160bar）紧凑型系列单杆液压缸附件的安装尺寸

This document specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-2. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-2, but this does not limit their application1). This document covers the following accessories, identified in accordance with ISO 6099: — AP6 — rod eye spherical, female thread (see Figure 1 and Table 1); — AB5 — clevis bracket, spherical eye, in angle (see Figure 2 and Table 2); — AA6-L — pivot pin, spherical bearing, locking plate (see Figure 3 and Table 3); — AL6 — locking plate for pivot pin (see Figure 4 and Table 4); — AP2 — rod clevis, female thread (see Figure 5 and Table 5); — AP4 — rod eye plain, female thread (see Figure 6 and Table 6); — AB2 — eye bracket (see Figure 7 and Table 7); — AB4 — clevis bracket, straight (see Figure 8 and Table 8); — AA4-S — pivot pin, plain (split pins) (see Figure 9 and Table 9); — AA4-R — pivot pin, plain (rings) (see Figure 10 and Table 10); — AT4 — trunnion bracket (see Figure 11 and Table 11). These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 2944. This document only applies to the dimensional criteria of products manufactured in conformity with this document; it does not apply to their functional characteristics.

Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series

ISO 8132:2022 液压传动.16 MPa（160 bar）介质和25 MPa（250 bar）系列单杆液压缸附件的安装尺寸

This document specifies the mounting dimensions required for the interchangeability of accessories for 16 MPa (160 bar) medium series cylinders in accordance with ISO 6020-1 and for 25 MPa (250 bar) series cylinders in accordance with ISO 6022. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-1 and ISO 6022, but this does not limit their application1) . This document covers the following accessories, identified in accordance with ISO 6099: — AP2 — rod clevis, female thread (see Figure 1 and Table 1); — AF3 — rod flange, circular (see Figure 2 and Table 2); — AB4 — clevis bracket, straight (see Figure 3 and Table 3); — AB3 — clevis bracket, in angle (see Figure 4 and Table 4); — AT4 — trunnion bracket (see Figure 5 and Table 5); — AA4-R — pivot pin, plain bearing (snap ring type) (see Figure 6 and Table 6); — AA4-S — pivot pin, plain bearing (split pin type) (see Figure 7 and Table 7); — AA6-R — pivot pin, spherical bearing (snap ring type) (see Figure 6 and Table 6); — AA6-S — pivot pin, spherical bearing (split pin type) (see Figure 7 and Table 7); — AP6 — rod eye spherical, female thread (see Figure 8 and Table 8); — AP4 — rod eye plain, female thread (see Figure 9 and Table 9) . These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 2944. This document applies only to the dimensional criteria of products manufactured in conformity with this document; it does not apply to their functional characteristics.

Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series

22/30435838 DC BS ISO 21287 气动流体动力 气缸 紧凑型气缸 1000 kPa (10 bar) 系列 孔径 20 mm 至 100 mm

BS ISO 21287. Pneumatic fluid power. Cylinders. Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm

DIN EN 13001-3-6:2022 起重机 一般设计 第 3-6 部分：机械的极限状态和能力证明 液压缸；德文版 EN 13001-3-6:2018+A1:2021

This European Standard is to be used together with EN 13001-1, EN 13001-2 and EN 13001-3-1 as well as pertinent crane type product EN standards, and as such they specify general conditions, requirements and methods to, by design and theoretical verification, prevent mechanical ha

Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders; German version EN 13001-3-6:2018+A1:2021

KS I 4043-2021 建筑设备再制造移动减速齿轮箱的试验方法

Test methods for remanufactured travelling reduction gear box of construction equipment

BS PD ISO/TS 13725:2021 液压流体动力 液压缸屈曲载荷的评估方法

Hydraulic fluid power. Method for evaluating the buckling load of a hydraulic cylinder

NF E48-038:2021 流体传动系统和元件. 往复作用的活塞杆刮垢环罩. 尺寸规格和公差

Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances

T/ZZB 2502-2021 商用车驾驶室液压举升油缸

本文件规定了商用车驾驶室液压举升油缸的术语和定义，分类、编号及基本参数、基本要求、技术要求、试验方法、检验规则、产品标识、包装、运输和储存，质量承诺。 本文件适用于轻型卡车、中型卡车和重型卡车的商用车用驾驶室液压举升油缸（以下简称举升油缸）。

Hydraulic lifting cylinder of commercial vehicle cab

ISO/TS 13725:2021 液压传动. 液压缸屈曲荷载的评估方法

Hydraulic fluid power - Method for evaluating the buckling load of a hydraulic cylinder

LST EN 13001-3-6+A1-2021 起重机 一般设计 第 3-6 部分：机械的极限状态和能力证明 液压缸

Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders

KS B 6517-2021 带定位传感器的精密液压缸的测试方法

TEST METHOD FOR PRECISE HYDRAULIC CYLINDER WITH POSITIONING SENSOR

KS B ISO 7425-2-2021 液压流体动力 弹性体通电、塑料面密封件的外壳 尺寸和公差 第2部分：杆密封外壳

Hydraulic fluid power －Housings for elastomer－energized, plastic－faced seals － Dimensions and tolerances － Part 2: Rod seal housings

KS B ISO 6195-2021 流体动力系统和部件 气缸 杆防尘圈 往复应用中的环外壳 尺寸和公差

Fluid power systems and components －Cylinder－rod wiper－ring housings in reciprocating applications －Dimensions and tolerances

KS B ISO 7425-1-2021 液压流体动力 弹性体供能、塑料面密封件的外壳 尺寸和公差 第1部分：活塞密封外壳

Hydraulic fluid power － Housings for elastomer－energized, plastic－faced seals － Dimensions and tolerances － Part 1: Piston seal housings

T/ZZB 2296-2021 剪叉式高空作业平台用液压缸

本文件规定了剪叉式高空作业平台用液压缸（以下简称“液压缸”）的术语和定义、分类和基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、贮存与运输以及质量承诺。 本文件适用于剪叉式高空作业平台配套的以液压油或性能相当的其他矿物油为工作介质，工作介质温度范围为-35 ℃～110 ℃的单作用液压缸和双作用液压缸。

Hydraulic cylinder for self-propelled scissors aerial work platform

BS ISO 6195:2021 流体动力系统和组件 往复运动应用中的缸杆防尘环外壳 尺寸和公差

Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances

DS/EN 13001-3-6:2021 起重机“总体设计”第 3-6 部分：机械的极限状态和能力证明“液压缸

Cranes – General design – Part 3-6: Limit states and proof of competence of machinery – Hydraulic cylinders