23.100.20 缸 标准查询与下载

T/HFJX 2008-2018 工程机械液压系统再制造 液压油缸

本标准规定了工程机械液压油缸再制造的术语和定义、要求、标志、包装、运输和贮存等。 本标准主要适用于合肥再制造集聚区内的工程机械液压油缸再制造设计、生产，其它液压油缸再制造可参照使用。

Construction machinery hydraulic system remanufacturing hydraulic cylinder

BS ISO 6099:2018 流体动力系统和组件 气缸 安装尺寸和安装类型的识别码

Fluid power systems and components. Cylinders. Identification code for mounting dimensions and mounting types

DIN ISO 6195:2018 流体动力系统和组件 往复式应用中的气缸杆刮油环外壳 尺寸和公差（ISO 6195:2013）

Wiper rings are used to prevent ingress of contaminants into fluid power components and systems and thereby to protect the seals and bearings within the fluid power equipment. ISO 6195 specifies the dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders. For five different types of wiper rings, the housing design as well as dimensions, tolerances and surface roughnesses are defined. The range of rod diameters is from 4 mm to 360 mm. This standard contains the German edition of ISO 6195:2013 which was developed by the Technical Committee ISO/TC 131 Fluid power systems.

Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances (ISO 6195:2013)

BS ISO 8140:2018 气动流体动力 气缸 1000kPa(10bar)系列 杆端U型夹安装尺寸

1   Scope This document specifies the mounting dimensions required for interchangeability of rod-end clevises of pneumatic cylinders. The rod-end clevises have been designed specifically for use with 1 000 kPa [10 bar 1 ] series cylinders manufactured in accordance with ISO 6432 and ISO 15552, but this does not limit their application. The clevises are used on piston rods of pneumatic cylinders for mechanically transmitting the cylinder force. The design of the clevises is based on the maximum forces resulting from the specified internal diameter of the cylinders and pressure according to ISO 6432, ISO 15552 and ISO 21287.

Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Mounting dimensions of rod-end clevises

BS ISO 8139:2018 气动流体动力 1000kPa（10巴）系列气缸 杆端球面孔 安装尺寸

Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Mounting dimensions of rod-end spherical eyes

ISO 8140:2018 气动传动.10巴(1000kPa)系列气缸.活塞杆U形叉.装配尺寸

This document specifies the mounting dimensions required for interchangeability of rod-end clevises of pneumatic cylinders. The rod-end clevises have been designed specifically for use with 1000 kPa [10 bar1)] series cylinders manufactured in accordance with ISO 6432 and ISO 15552, but this does not limit their application. The clevises are used on piston rods of pneumatic cylinders for mechanically transmitting the cylinder force. The design of the clevises is based on the maximum forces resulting from the specified internal diameter of the cylinders and pressure according to ISO 6432, ISO 15552 and ISO 21287.

Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises

ISO 6099:2018 液体动力系统和部件.汽缸.安装尺寸和安装类型的标识码

This document establishes a convention for the identification of mounting dimensions and types used in the mounting of fluid power cylinders. It specifies a code for identifying cylinder mounting, envelope, accessory and connector dimensions, and for cylinder mounting and accessory types. This document does not represent a standard list of all fluid power cylinder mounting and accessory types.

Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types

ISO 8139:2018 气压流体动力.1000kPa(10bar)系列汽缸.杆端球眼的安装尺寸

This document specifies the mounting dimensions required for interchangeability of rod-end spherical eyes of pneumatic cylinders. The rod-end spherical eyes have been designed specifically for use with 1000 kPa [10 bar1)] series cylinders manufactured in accordance with ISO 6432 and ISO 15552, but this does not limit their application. The spherical bearing end eyes are used on piston rods of pneumatic cylinders for mechanically transmitting the cylinder force under oscillatory rotational and tilting movements. The design of the rod-end spherical eyes is based on the maximum forces resulting from the specified internal diameter of the cylinders and pressure according to ISO 6432, ISO 15552 and ISO 21287.

Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes

BS ISO 5597:2018 液压流体动力 气缸 往复应用中单作用活塞和杆密封件的外壳尺寸和公差

Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications

ISO 5597:2018 液压传动.缸筒.往复式应用件中单动式活塞和活塞杆密封沟槽的尺寸和公差

This document establishes the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder rod and piston seal housings for reciprocating applications in the following range of dimensions: — for cylinders of 16 mm to 500 mm; — for rods of 6 mm to 450 mm. An additional range of seal housings is detailed in this document to meet the reduced envelope requirements of the 160 bar (16 MPa)1) compact series of ISO 6020-2; these smaller section seals require stricter piston rod and cylinder bore tolerances. The range of dimensions is as follows: — cylinders of 25 mm to 200 mm; — rods of 12 mm to 140 mm. This document does not give details of seal design, since the manner of construction of seals varies with each manufacturer. The design and material of the seal and any incorporated anti-extrusion components are determined by conditions such as temperature and pressure. This document only applies to the dimensional criteria of products manufactured in conformity with this document; it does not apply to their functional characteristics.

Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications

BS ISO 15552:2018 气动流体动力 带可拆卸安装件的气缸 1000kPa(10bar)系列 孔径 32mm 至 320mm 基本尺寸、安装尺寸和附件尺寸

Pneumatic fluid power. Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm. Basic, mounting and accessories dimensions

ISO 15552:2018 气压传动.具有可拆卸安装件的、1000kPa(10 bar)系列、孔径为32mm至320mm的气缸.基础尺寸、安装尺寸和附件尺寸

This document establishes a metric series of basic, mounting and accessories dimensions as required for interchangeability of single or double rod pneumatic cylinders with or without provision for magnetic sensors for a maximum rated pressure of 1000 kPa (10 bar). It applies to pneumatic cylinders with detachable mountings.

Pneumatic fluid power - Cylinders with detachable mountings, 1000 kPa (10 bar) series, bores from 32 mm to 320 mm - Basic, mounting and accessories dimensions

JIS B 8396:2018 液压流体动力. 汽缸. 往复式应用中单作用活塞和杆密封件外壳的尺寸和公差

Hydraulic fluid power -- Cylinders -- Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications

JIS B 8366-1:2018 流体动力系统和元件.液压缸.元件和识别代码.第1部分:缸径和活塞杆直径和面积比

Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 1: Cylinder bores and piston rod diameters and area ratios

EN 13001-3-6:2018 起重机 一般设计 第 3-6 部分：机械的极限状态和能力证明 液压缸

Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders

JB/T 12706.2-2017 液压传动 16 MPa系列单杆缸的安装尺寸 第2部分：缸径25 mm～220 mm紧凑型系列

Installation Dimensions of Hydraulic Transmission 16 MPa Series Single Rod Cylinder Part 2: Compact Series with Bore Diameter 25 mm～220 mm

JB/T 13291-2017 液压传动 25 MPa系列单杆缸的安装尺寸

Installation dimensions of hydraulic transmission 25 MPa series single rod cylinder

GSO ISO 8132:2017 液压流体动力 单杆油缸附件安装尺寸 16 MPa（160 bar）中型和25 MPa（250 bar）系列

This International Standard specifies the mounting dimensions required for the interchangeability of accessories for 16 MPa [160 bar] medium series cylinders in accordance with ISO 6020-1 and for 25 MPa (250 bar) series cylinders, in accordance with ISO 6022. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-1 and ISO 6022, but this does not limit their application. NOTE 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2 This International Standard covers the following accessories, identified in accordance with ISO 6099: — AP2 — rod clevis, female thread (see Figure 1 and Table 1); — AF3 — rod flange, circular (see Figure 2 and Table 2); — AB4 — clevis bracket, straight (see Figure 3 and Table 3); — AB3 — clevis bracket, in angle (see Figure 4 and Table 4); — AT4 — trunnion bracket (see Figure 5 and Table 5); — AA4-R — pivot pin, plain (cotter pin or snap ring type) (see Figure 6 and Table 6); — AA4-S — pivot pin, plain (split pins) (see Figure 7 and Table 7); — AA6-R — pivot pin, spherical bearing (cotter pin or snap ring type) (see Figure 6 and Table 6); — AA6-S — pivot pin, spherical bearing (split pins) (see Figure 7 and Table 7); — AP6 — rod eye spherical, female thread (see Figure 8 and Table 8); — AP4 — rod eye plain, female thread (see Figure 9 and Table 9). These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 3322. This International Standard applies only to the dimensional criteria of products manufactured in conformity with this International Standard; it does not apply to their functional characteristics.

Hydraulic fluid power -- Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series

GSO ISO/TR 16806:2017 气动流体动力 气缸 气动滑块的负载能力及其表示方法

1.1 This Technical Report describes how to calculate the loading limits for a pneumatic slide based upon: — external forces applied in the three principle planes of a tool plate, and applied at any point; — external torque applied in the three principle planes of a tool plate; — bearing limits determined by the slide manufacturer in conjunction with the bearing supplier. 1.2 This Technical Report also describes how to calculate tool plate deflections due to the loads. 1.3 This Technical Report describes how to present the rating information in technical documentation for application by a user. 1.4 This Technical Report assumes that all of the applied loads and torque will be absorbed by the guide rods and not by the piston rod. Only the axial thrust load (but not the resulting moments) will be absorbed by the piston rod.

Pneumatic fluid power -- Cylinders -- Load capacity of pneumatic slides and their presentation method

GSO ISO 8133:2017 液压流体动力 单杆油缸附件安装尺寸 16 MPa（160 bar）紧凑型系列

This International Standard specifies the mounting dimensions required for interchangeability of accessories for 16 MPa [160 bar)] compact cylinders conforming to ISO 6020-2. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-2, but this does not limit their application. Note 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm². This International Standard covers the following accessories, identified in accordance with ISO 6099: — AP6 — rod eye spherical, female thread (see Figure 1 and Table 1); — AB5 — clevis bracket, spherical eye, in angle (see Figure 2 and Table 2); — AA6-L — pivot pin, spherical bearing, locking plate (see Figure 3 and Table 3); — AL6 — locking plate for pivot pin (see Figure 4 and Table 4); — AP2 — rod clevis, female thread (see Figure 5 and Table 5); — AP4 — rod eye plain, female thread (see Figure 6 and Table 6); — AB2 — eye bracket (see Figure 7 and Table 7); — AB4 — clevis bracket, straight (see Figure 8 and Table 8); — AA4-S — pivot pin, plain (split pins) (see Figure 9 and Table 9); — AA4-R — pivot pin, plain (rings) (see Figure 10 and Table 10); — AT4 — trunnion bracket (see Figure 11 and Table 11). These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 3322. This International Standard only applies to the dimensional criteria of products manufactured in conformity with this International Standard; it does not apply to their functional characteristics.

Hydraulic fluid power -- Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series