23.100.40 管道和管接头 标准查询与下载

BS EN ISO 1179-4:2008 通用和液压传动用连接件.带弹性体密封件或金属对金属密封件的ISO 228-1螺纹端口和螺柱端头.通用只带金属对金属密封件(B型)的螺柱端头

This part of ISO 1179 specifies dimensions, performance requirements and test procedures for stud ends with ISO 228-1 threads and metal-to-metal sealing for general use only. These stud ends should not be used for leak-free hydraulic fluid power applications. Stud ends in accordance with this part of ISO 1179 may be used at working pressures up to 40 MPa (400 bar) for the S series, up to 25 MPa (250 bar) for the L series, and up to 10 MPa (100 bar) for the LL series. The permissible working pressure depends upon size, materials, design, working conditions, application, etc. Conformance to the dimensional information in this part of ISO 1179 does not guarantee rated performance. Each manufacturer shall perform tests according to the specification contained in this part of ISO 1179 in order to ensure that components made to this part of ISO 1179 comply with the performance ratings.

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Stud ends for general use only with metal-to-metal sealing (type B)

BS EN ISO 1179-2:2008 通用和液压传动用连接件.带弹性体密封件或金属对金属密封件的ISO 228-1螺纹端口或螺柱端头.带弹性体密封件(E型)的重型(S系列)和轻型(L系列)螺柱端头

This part of ISO 1179 specifies dimensions, performance requirements and test procedures for heavy-duty (S series) and light-duty (L series) stud ends with ISO 228-1 threads and the elastomeric sealing (type E) that is used with them. Heavy-duty (S series) stud ends with type E sealing in accordance with this part of ISO 1179 may be used at working pressures up to 63 MPa (630 bar). Light-duty (L series) stud ends with type E sealing in accordance with this part of ISO 1179 may be used at working pressures up to 25 MPa (250 bar). The permissible working pressure depends upon size, materials, design, working conditions, application, etc. Conformance to the dimensional information in this part of ISO 1179 does not guarantee rated performance. Each manufacturer shall perform testing according to the specification contained in this part of ISO 1179 to assure that components made to this part of ISO 1179 comply with the performance ratings.

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)

BS EN ISO 1179-1:2008 通用和液压传动用连接件.带弹性体密封件或金属对金属密封件的ISO 228-1螺纹端口和螺柱端头.螺纹端口

This part of ISO 1179 specifies dimensions for ports with ISO 228-1 threads for use with non-adjustable stud ends shown in ISO 1179-2, ISO 1179-3 and ISO 1179-4 and with adjustable stud ends shown in ISO 1179-3. Ports in accordance with this part of ISO 1179 may be used: ? with ISO 1179-2 heavy-duty (S series) stud ends with type E sealing at working pressures up to 63 MPa (630 bar) and light-duty (L series) stud ends at working pressures up to 25 MPa (250 bar); ? with ISO 1179-3 light-duty (L series) stud ends with type G sealing at working pressures up to 31,5 MPa (315 bar), and with ISO 1179-3 light-duty (L series) adjustable stud ends with type H sealing at working pressures up to 20 MPa (200 bar); ? with ISO 1179-4 stud ends with type B sealing at working pressures up to 40 MPa (400 bar) for the S series, up to 25 MPa (250 bar) for the L series, and up to 10 MPa (100 bar) for the LL series, except for the G2 size port, which in hydraulic fluid power systems is used mainly with accumulators and for which ISO 1179-2, ISO 1179-3 and ISO 1179-4 do not specify stud ends. The permissible working pressure depends upon size, materials, design, working conditions, application, etc. Users of this part of ISO 1179 should ensure that there is sufficient material around the port to maintain the pressure.

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Threaded ports

NF E49-051-2:2008 通用和液压传动用连接件.带弹性体或金属对金属密封的ISO 228-1螺纹的端口和螺柱端.第2部分:带弹性体密封(E型)的重型(S系列)和轻型(L系列)螺柱端

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2 : heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E).

NF E49-051-1:2008 通用和液压传动用连接件.带弹性体或金属对金属密封的ISO 228-1螺纹的端口和螺柱端.第1部分:螺纹端口

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1 : threaded ports.

NF E49-051-3*NF EN ISO 1179-3:2008 通用和液压传动用连接件.带弹性体或金属对金属密封的ISO 228-1螺纹的端口和螺柱端.第3部分:使用定位环(G和H型)的O型密封圈密封的轻型(L系列)螺柱端

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3 : light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H).

DIN EN ISO 1179-3:2008 通用和液压传动用连接件.带弹性体密封或金属对金属密封的ISO 228-1螺纹的孔口和螺柱端.第3部分:带定位环(G和H型)O型密封圈密封的轻型(L系列)螺柱端

This part of ISO 1179 specifies dimensions, performance requirements and test procedures for non-adjustable and adjustable light-duty (L series) stud ends with ISO 228-1 threads with sealing by O-ring with retaining ring (types G and H, respectively). Light-duty (L series) stud ends in accordance with this part of ISO 1179 may be used at working pressures up to 31,5 MPa (315 bar) for non-adjustable stud ends (type G) and up to 20 MPa (200 bar) for adjustable stud ends (type H). The permissible working pressure depends upon size, materials, design, working conditions, application, etc. Conformance to the dimensional information in this part of ISO 1179 does not guarantee rated performance. Each manufacturer shall perform testing according to the specification contained in this part of ISO 1179 to assure that components made to this part of ISO 1179 comply with the performance ratings. NOTE I This part of ISO 1179 applies to connectors detailed in ISO 8434-2. NOTE 2 The introduction of this part of ISO 1179 gives recommendations for ports and stud ends to be used for new designs in hydraulic and pneumatic fluid power applications.

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007); Ger

DIN EN ISO 1179-2:2008 通用和液压传动用连接件.带弹性体密封或金属对金属密封的ISO 228-1螺纹的孔口和螺柱端.第2部分:带弹性体密封(E型)的重型(S系列)和轻型(L系列)螺柱端

This part of ISO 1179 specifies dimensions, performance requirements and test procedures for heavy-duty (S series) and light-duty (L series) stud ends with ISO 228-1 threads and the elastomeric sealing (type E) that is used with them. Heavy-duty (S series) stud ends with type E sealing in accordance with this part of ISO 1179 may be used at working pressures up to 63 MPa (630 bar). Light-duty (L series) stud ends with type E sealing in accordance with this part of ISO 1179 may be used at working pressures up to 25 MPa (250 bar). The permissible working pressure depends upon size, materials, design, working conditions, application, etc. Conformance to the dimensional information in this part of ISO 1179 does not guarantee rated performance. Each manufacturer shall perform testing according to the specification contained in this part of ISO 1179 to assure that components made to this part of ISO 1179 comply with the performance ratings. NOTE 1 This part of ISO 1179 applies to connectors detailed in ISO 8434-1 and ISO 8434-2. NOTE 2 The introduction of this part of ISO 1179 gives recommendations for ports and stud ends to be used for new designs in hydraulic and pneumatic fluid power applications.

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2007); Ge

DIN EN ISO 1179-4:2008 通用和液压传动用连接件.带弹性体密封或金属对金属密封的ISO 228-1螺纹的孔口和螺柱端.第4部分:仅与金属对金属密封(B型)的通用螺柱端

This part of ISO 1179 specifies dimensions, performance requirements and test procedures for stud ends with ISO 228-1 threads and metal-to-metal sealing for general use only. These stud ends should not be used for leak-free hydraulic fluid power applications. Stud ends in accordance with this part of ISO 1179 may be used at working pressures up to 40 MPa (400 bar) for the S series, up to 25 MPa (250 bar) for the L series, and up to 10 MPa (100 bar) for the LL series. The permissible working pressure depends upon size, materials, design, working conditions, application, etc. Conformance to the dimensional information in this part of ISO 1179 does not guarantee rated performance. Each manufacturer shall perform tests according to the specification contained in this part of ISO 1179 in order to ensure that components made to this part of ISO 1179 comply with the performance ratings. NOTE 1 This part of ISO 1179 applies to connectors detailed in ISO 8434-1 and ISO 8434-2. NOTE 2 The introduction of this part of ISO 1179 gives recommendations for ports and stud ends to be used for new designs in hydraulic and pneumatic fluid power applications.

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007); German version EN ISO 1179

DIN EN ISO 1179-1:2008 通用和液压传动用连接件.带弹性体密封或金属对金属密封的ISO 228-1螺纹的孔口和螺柱端.第1部分:带螺纹的孔口

This part of ISO 1179 specifies dimensions for ports with ISO 228-1 threads for use with non-adjustable stud ends shown in ISO 1179-2, ISO 1179-3 and ISO 1179-4 and with adjustable stud ends shown in ISO 1179-3. Ports in accordance with this part of ISO 1179 may be used: with ISO 1179-2 heavy-duty (S series) stud ends with type E sealing at working pressures up to 63 MPa (630 bar) and light-duty (L series) stud ends at working pressures up to 25 MPa (250 bar); with ISO 1179-3 light-duty (L series) stud ends with type G sealing at working pressures up to 31,5 MPa (315 bar), and with ISO 1179-3 light-duty (L series) adjustable stud ends with type H sealing at working pressures up to 20 MPa (200 bar); -- with ISO 1179-4 stud ends with type B sealing at working pressures up to 40 MPa (400 bar) for the S series, up to 25 MPa (250 bar) for the L series, and up to 10 MPa (100 bar) for the LL series, except for the G2 size port, which in hydraulic fluid power systems is used mainly with accumulators and for which ISO 1179-2, ISO 1179-3 and ISO 1179-4 do not specify stud ends. The permissible working pressure depends upon size, materials, design, working conditions, application, etc. Users of this part of ISO 1179 should ensure that there is sufficient material around the port to maintain the pressure. NOTE The introduction of this part of ISO 1179 gives recommendations for ports and stud ends to be used for new designs in hydraulic and pneumatic fluid power applications.

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2007); German version EN ISO 1179-1:2008

LST EN ISO 1179-1:2008 一般用途和流体动力连接 带 ISO 228-1 螺纹的端口和螺柱端，带弹性体或金属对金属密封 第1部分：螺纹端口（ISO 1179-1:2007）

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2007)

LST EN ISO 1179-4:2008 一般用途和流体动力连接 带 ISO 228-1 螺纹的端口和螺柱端，带弹性体或金属对金属密封 第4部分：仅用于一般用途的螺柱端，采用金属对金属密封（B 型）（ISO 1179-4:2007）

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)

LST EN ISO 1179-3:2008 一般用途和流体动力连接件 带 ISO 228-1 螺纹的端口和螺柱端，带弹性体或金属对金属密封 第3部分：轻型（L 系列）螺柱端，带 O 型环和固定环密封（ G 型和 H 型）（ISO 1179-3:2007）

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)

LST EN ISO 1179-2:2008 一般用途和流体动力连接件 带 ISO 228-1 螺纹的端口和螺柱端，带弹性密封或金属对金属密封 第2部分：带弹性密封的重型（S 系列）和轻型（L 系列）螺柱端密封（E 型）（ISO 1179-2:2007）

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2007)

DS/EN ISO 1179-1:2008 一般用途和流体动力的连接件 带 ISO 228-1 螺纹的端口和螺柱端，带弹性体或金属对金属密封 第1部分：螺纹端口

This part of ISO 1179 specifies dimensions for ports with ISO 228-1 threads for use with non-adjustable stud ends shown in ISO 1179-2, ISO 1179-3 and ISO 1179-4 and with adjustable stud ends shown in ISO 1179-3.Ports in accordance with this part of ISO 1179 may be used:. with ISO 1179-2 heavy-duty (S series) stud ends with type E sealing at working pressures up to 63 MPa (630 bar) and light-duty (L series) stud ends at working pressures up to 25 MPa (250 bar);. with ISO 1179-3 light-duty (L series) stud ends with type G sealing at working pressures up to 31,5 MPa (315 bar), and with ISO 1179-3 light-duty (L series) adjustable stud ends with type H sealing a

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports

DS/EN ISO 1179-4:2008 一般用途和流体动力连接件 带 ISO 228-1 螺纹的端口和螺柱端，带弹性体或金属对金属密封 第4部分：仅用于一般用途的螺柱端，采用金属对金属密封（B 型）

This part of ISO 1179 specifies dimensions, performance requirements and test procedures for stud ends with ISO 228-1 threads and metal-to-metal sealing for general use only. These stud ends should not be used for leak-free hydraulic fluid power applications.Stud ends in accordance with this part of ISO 1179 may be used at working pressures up to 40 MPa (400 bar) for the S series, up to 25 MPa (250 bar) for the L series, and up to 10 MPa (100 bar) for the LL series. The permissible working pressure depends upon size, materials, design, working conditions, application, etc.Conformance to the dimensional information in this part of ISO 1179 does not guarantee

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B)

DS/EN ISO 1179-3:2008 一般用途和流体动力连接件 带 ISO 228-1 螺纹的端口和螺柱端，带弹性体或金属对金属密封 第3部分：轻型（L 系列）螺柱端，带 O 型环和固定环密封（ G 型和 H 型）

This part of ISO 1179 specifies dimensions, performance requirements and test procedures for non-adjustable and adjustable light-duty (L series) stud ends with ISO 228-1 threads with sealing by O-ring with retaining ring (types G and H, respectively).Light-duty (L series) stud ends in accordance with this part of ISO 1179 may be used at working pressures up to 31,5 MPa (315 bar) for non-adjustable stud ends (type G) and up to 20 MPa (200 bar) for adjustable stud ends (type H). The permissible working pressure depends upon size, materials, design, working conditions, application, etc.Conformance to the dimensional information in this part of ISO 1179 does no

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)

DS/EN ISO 1179-2:2008 一般用途和流体动力连接件 带 ISO 228-1 螺纹的端口和螺柱端，带弹性密封或金属对金属密封 第2部分：带弹性密封的重型（S 系列）和轻型（L 系列）螺柱端密封（E 型）

This part of ISO 1179 specifies dimensions, performance requirements and test procedures for heavy-duty (S series) and light-duty (L series) stud ends with ISO 228-1 threads and the elastomeric sealing (type E) that is used with them.Heavy-duty (S series) stud ends with type E sealing in accordance with this part of ISO 1179 may be used at working pressures up to 63 MPa (630 bar). Light-duty (L series) stud ends with type E sealing in accordance with this part of ISO 1179 may be used at working pressures up to 25 MPa (250 bar). The permissible working pressure depends upon size, materials, design, working conditions, application, etc. Conformance to the dim

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)

JB/T 7057-2008 调速式气动管接头技术条件

本标准规定以压缩空气为介质的调速式气动管接头的技术要求、测试方法和产品标识。 本标准适用于启动系统中接管外径为3mm～15mm，最高工作压力不大于2.5MPa，附带节流装置的启动管接头。

Rules relating of speed adjusting pneumatic fluid power tube fittings

JB/T 7056-2008 气动管接头.通用技术条件

本标准规定了以压缩空气为介质的管接头的分类、产品标识、基本技术要求和测试方法。 本标准适用于启动系统中最高工作压力不大于2.5MPa的管接头。

General rules relating of pneumatic fluid power tube fittings