23.100.40 管道和管接头 标准查询与下载

EN ISO 1179-4:2008 通用和液压传动用连接件.带弹性体密封或金属对金属密封的ISO 228-1螺纹的孔口和螺柱端.第4部分:仅与金属对金属密封(B型)的通用螺柱端

This part of ISO 1179 specifies dimensions; performance requirements and test procedures for stud ends with ISO 228-1 threads and metal-to-metal sealing for general use only. These stud ends should not be used for leak-free hydraulic fluid power applications.

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)

EN ISO 1179-3:2008 通用和液压传动用连接件.带弹性体密封或金属对金属密封的ISO 228-1螺纹的孔口和螺柱端.第3部分:带定位环(G和H型)O型密封圈密封的轻型(L系列)螺柱端

This part of ISO 1179 specifies dimensions; performance requirements and test procedures for non-adjustable and adjustable light-duty (L series) stud ends with ISO 228-1 threads with sealing by O-ring with retaining ring (types G and H; respectively).

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)

EN ISO 1179-2:2008 通用和液压传动用连接件.带弹性体密封或金属对金属密封的ISO 228-1螺纹的孔口和螺柱端.第2部分:带弹性体密封(E型)的重型(S系列)和轻型(L系列)螺柱端

This part of ISO 1179 specifies dimensions; performance requirements and test procedures for heavy-duty (S series) and light-duty (L series) stud ends with ISO 228-1 threads and the elastomeric sealing (type E) that is used with them.

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)

EN ISO 1179-1:2008 通用和液压传动用连接件.带弹性体密封或金属对金属密封的ISO 228-1螺纹的孔口和螺柱端.第1部分:带螺纹的孔口

This part of ISO 1179 specifies dimensions for ports with ISO 228-1 threads for use with non-adjustable stud ends shown in ISO 1179-2; ISO 1179-3 and ISO 1179-4 and with adjustable stud ends shown in ISO 1179-3.

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports

NF E48-064-2*NF ISO 8434-2:2008 液压传动和通用金属管连接件.第2部分:37°扩口管接头

Metallic tube connections for fluid power and general use - Part 2 : 37 o flared connectors.

NF E48-079-5*NF ISO 12151-5:2008 用于液压传动和一般用途的管接头.软管配件.第5部分:带ISO 8434-2 37°扩口端的软管配件

Connections for hydraulic fluid power and general use - Hose fittings - Part 5 : hose fittings with ISO 8434-2 37 o flared ends.

DIN EN ISO 8434-1:2008 液压传动和通用金属管连接件.第1部分:24度锥形接头(ISO 8434-1-2007).德文版本EN ISO 8434-1-2007

This pad of ISO 8434 specifies the general and dimensional requirements for 24' cone connectors using cutting ring and O-ring seal cone (referred to as DKO) suitable for use with ferrous and non-ferrous tubes with outside diameters from 4 mm to 42 mm inclusive. These connectors are for use in fluid power and general applications within the limits of pressure and temperature specified in this part of ISO 8434. They are intended for the connection of plain end tubes and hose fittings to ports in accordance with ISO 6149-1, ISO 1179-1 and ISO 9974-1. (See ISO 12151-2 for related hose fitting specification.) These connectors provide full-flow connections in hydraulic systems operating to the working pressures shown in Table 1. Because many factors influence the pressure at which a system performs satisfactorily, these values are not to be understood as guaranteed minimums. For every application, sufficient testing will need to be conducted and reviewed by both the user and manufacturer to ensure that required performance levels are met. NOTE 1 For new designs in hydraulic fluid power applications, see the requirements given in 9.6. Where the requirements of the application allow for the use of elastomeric seals, connector designs that conform to International Standards and incorporate elastomeric sealing are preferred. NOTE 2 For use under conditions outside the pressure and/or temperature limits specified, see 5.4. This part of ISO 8434 also specifies a performance and qualification test for these connectors.

Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007); German version EN ISO 8434-1:2007

LST EN ISO 8434-1:2007 流体动力和一般用途的金属管连接 第1部分：24 度锥形连接器（ISO 8434-1:2007）

Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007)

DS/EN ISO 8434-1:2007 流体动力和一般用途的金属管接头 第1部分：24 度锥形接头

This part of ISO 8434 specifies the general and dimensional requirements for 24° cone connectors using cutting ring and O-ring seal cone (referred to as DKO) suitable for use with ferrous and non-ferrous tubes with outside diameters from 4 mm to 42 mm inclusive. These connectors are for use in fluid power and general applications within the limits of pressure and temperature specified in this part of ISO 8434.They are intended for the connection of plain end tubes and hose fittings to ports in accordance withISO 6149-1, ISO 1179-1 and ISO 9974-1. (See ISO 12151-2 for related hose fitting specification.)These connectors provide full-flow connections in hydra

Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors

BS ISO 8434-2:2007 液压传动和通用金属管连接件.37°扩口管接头

This part of ISO 8434 specifies general and dimensional requirements for the design and performance of 37° flared connectors that are suitable for use with ferrous and non-ferrous tubes with outside diameters from 6 mm to 50,8 mm, inclusive. These connectors are for use in fluid power and general applications within the limits of pressure and temperature specified in this part of ISO 8434. They are intended for the connection of tubes and hose fittings to ports in accordance with ISO 6149-1, ISO 1179-1, ISO 9974-1 and ISO 11926-1. (See ISO 12151-5 for related hose fitting specification.) These connectors provide full-flow connections with metal-to-metal sealing in hydraulic systems operating to the working pressures shown in Table 1. Because many factors influence the pressure at which a system performs satisfactorily, these values shall not be understood as guaranteed minimums. For every application, sufficient testing will need to be conducted and the results reviewed by both the user and manufacturer to ensure that required performance levels are met. NOTE 1 For new designs in hydraulic fluid power applications, see the requirements given in 9.6. Where the requirements of the application allow for the use of elastomeric seals, connector designs that conform to International Standards and incorporate elastomeric sealing are preferred. NOTE 2 For use under conditions outside the pressure and/or temperature limits specified, see 5.5. Both metric and inch tubing can be accommodated by changing the sleeve (see Figure 7). In the past, these connectors have been used predominantly with inch tubing. For new and future designs, the use of metric tubing is preferred. This part of ISO 8434 also specifies a performance and qualification test for 37° flared connectors.

Metallic tube connections for fluid power and general use - 37 ° flared connectors

NF E48-064-1:2007 流体动力和通用的金属管接头.第1部分:24℃锥形接头

Metallic tube connections for fluid power and general use - Part 1 : 24 degree cone connectors.

SAE J1754/3-2007 软管总成，液压，J517 100R 系列软管第 3 部分：采购和订购信息

This SAE standard covers procurement and ordering information for hose assemblies using SAE Standard J 517 100R Series hoses and connectors specified in SAE Standard J 516 or all parts of ISO 12151 for use in hydraulic systems using petroleum based hydraulic fluids.

Hose Assemblies, Hydraulic, J517 100R Series Hose Part 3: Procurement and Ordering Information

BS EN ISO 8434-1:2007 液压传动和通用金属管连接.24度角连接器

This part of ISO 8434 specifies the general and dimensional requirements for 24° cone connectors using cutting ring and O-ring seal cone (referred to as DKO) suitable for use with ferrous and non-ferrous tubes with outside diameters from 4 mm to 42 mm inclusive. These connectors are for use in fluid power and general applications within the limits of pressure and temperature specified in this part of ISO 8434. They are intended for the connection of plain end tubes and hose fittings to ports in accordance with ISO 6149-1, ISO 1179-1 and ISO 9974-1. (See ISO 12151-2 for related hose fitting specification.) These connectors provide full-flow connections in hydraulic systems operating to the working pressures shown in Table 1. Because many factors influence the pressure at which a system performs satisfactorily, these values are not to be understood as guaranteed minimums. For every application, sufficient testing will need to be conducted and reviewed by both the user and manufacturer to ensure that required performance levels are met. NOTE 1 For new designs in hydraulic fluid power applications, see the requirements given in 9.6. Where the requirements of the application allow for the use of elastomeric seals, connector designs that conform to International Standards and incorporate elastomeric sealing are preferred. NOTE 2 For use under conditions outside the pressure and/or temperature limits specified, see 5.4. This part of ISO 8434 also specifies a performance and qualification test for these connectors.

Metallic tube connections for fluid power and general use - 24 degree cone connectors

ISO 8434-2:2007 液压传动和通用金属管连接件.第2部分:37°扩口管接头

This part of ISO 8434 specifies general and dimensional requirements for the design and performance of 37° flared connectors that are suitable for use with ferrous and non-ferrous tubes with outside diameters from 6 mm to 50,8 mm, inclusive. These connectors are for use in fluid power and general applications within the limits of pressure and temperature specified in this part of ISO 8434. They are intended for the connection of tubes and hose fittings to ports in accordance with ISO 6149-1, ISO 1179-1, ISO 9974-1 and ISO 11926-1. (See ISO 12151-5 for related hose fitting specification.) These connectors provide full-flow connections with metal-to-metal sealing in hydraulic systems operating to the working pressures shown in Table 1. Because many factors influence the pressure at which a system performs satisfactorily, these values shall not be understood as guaranteed minimums. For every application, sufficient testing will need to be conducted and the results reviewed by both the user and manufacturer to ensure that required performance levels are met. NOTE 1 For new designs in hydraulic fluid power applications, see the requirements given in 9.6. Where the requirements of the application allow for the use of elastomeric seals, connector designs that conform to International Standards and incorporate elastomeric sealing are preferred. NOTE 2 For use under conditions outside the pressure and/or temperature limits specified, see 5.5. Both metric and inch tubing can be accommodated by changing the sleeve (see Figure 7). In the past, these connectors have been used predominantly with inch tubing. For new and future designs, the use of metric tubing is preferred. This part of ISO 8434 also specifies a performance and qualification test for 37° flared connectors.

Metallic tube connections for fluid power and general use - Part 2: 37° flared connectors

EN ISO 8434-1:2007 液压传动和通用金属管连接件.第1部分:24度锥形接头.合并勘误表-2009年4月

This part of ISO 8434 specifies cutting ring and O-ring seal cone outside diameters from 4 mm toThe general (referred to and dimensional requirements for 240 cone connectors using as DKO) suitable for use with ferrous and non-ferrous tubes with 42 mm inclusive.These connectors are for use in fluid power and general applications withinThe limits of pressure and temperature specified inThis part of ISO 8434.

Metallic tube connections for fluid power and general use - Part 1:24 degree cone connectors (ISO 8434-1:2007)

ISO 8434-1:2007 液压传动和通用金属管连接件.第1部分:24°锥形接头

This part of ISO 8434 specifies the general and dimensional requirements for 24° cone connectors using cutting ring and O-ring seal cone (referred to as DKO) suitable for use with ferrous and non-ferrous tubes with outside diameters from 4 mm to 42 mm inclusive. These connectors are for use in fluid power and general applications within the limits of pressure and temperature specified in this part of ISO 8434. They are intended for the connection of plain end tubes and hose fittings to ports in accordance with ISO 6149-1, ISO 1179-1 and ISO 9974-1. (See ISO 12151-2 for related hose fitting specification.) These connectors provide full-flow connections in hydraulic systems operating to the working pressures shown in Table 1. Because many factors influence the pressure at which a system performs satisfactorily, these values are not to be understood as guaranteed minimums. For every application, sufficient testing will need to be conducted and reviewed by both the user and manufacturer to ensure that required performance levels are met. NOTE 1 For new designs in hydraulic fluid power applications, see the requirements given in 9.6. Where the requirements of the application allow for the use of elastomeric seals, connector designs that conform to International Standards and incorporate elastomeric sealing are preferred. NOTE 2 For use under conditions outside the pressure and/or temperature limits specified, see 5.4. This part of ISO 8434 also specifies a performance and qualification test for these connectors.

Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors

BS ISO 12151-5:2007 用于液压流体传动和一般用途的接头.软管组件.带ISO 8434-2 37°扩口端的软管配件

This part of ISO 12151 specifies the general and dimensional requirements for the design performance of 37°flared hose fittings in accordance with ISO 8434-2,made of carbon steel,for nominal hose sizes of 6,3 mm through 51 mm inclusive in accordance with ISO 4397. These hose fittings (see Figure 1 for a typical example)are for use in hydraulic fluid power systems with hose that meets the requirements of the respective hose standards and in general applications with suitable hose.

Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-2 37 ° flared ends

NF E48-696:2007 液压动力系统.组装系统.冲洗用清洁管线的方法

Hydraulic fluid power systems - Assembled systems - Methods for cleaning lines by flushing.

ISO 1179-4:2007 通用和液压传动用连接件.带弹性体密封件或金属对金属密封件的ISO 228-1螺纹开口和螺柱端头.第4部分:通用只带金属对金属密封件(B型)的螺柱端头

This part of ISO 1179 specifies dimensions, performance requirements and test procedures for stud ends with ISO 228-1 threads and metal-to-metal sealing for general use only. These stud ends should not be used for leak-free hydraulic fluid power applications. Stud ends in accordance with this part of ISO 1179 may be used at working pressures up to 40 MPa (400 bar) for the S series, up to 25 MPa (250 bar) for the L series, and up to 10 MPa (100 bar) for the LL series. The permissible working pressure depends upon size, materials, design, working conditions, application, etc. Conformance to the dimensional information in this part of ISO 1179 does not guarantee rated performance. Each manufacturer shall perform tests according to the specification contained in this part of ISO 1179 in order to ensure that components made to this part of ISO 1179 comply with the performance ratings. NOTE 1 This part of ISO 1179 applies to connectors detailed in ISO 8434-1 and ISO 8434-2. NOTE 2 The introduction of this part of ISO 1179 gives recommendations for ports and stud ends to be used for new designs in hydraulic and pneumatic fluid power applications.

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B)

ISO 1179-3:2007 通用和液压传动用连接件.带弹性体密封件或金属对金属密封件的ISO 228-1螺纹开口和螺柱端头.第3部分:带扣环O型密封圈(G型和H型)密封的轻型(L系列)螺柱端头

This part of ISO 1179 specifies dimensions, performance requirements and test procedures for non-adjustable and adjustable light-duty (L series) stud ends with ISO 228-1 threads with sealing by O-ring with retaining ring (types G and H, respectively). Light-duty (L series) stud ends in accordance with this part of ISO 1179 may be used at working pressures up to 31,5 MPa (315 bar) for non-adjustable stud ends (type G) and up to 20 MPa (200 bar) for adjustable stud ends (type H). The permissible working pressure depends upon size, materials, design, working conditions, application, etc. Conformance to the dimensional information in this part of ISO 1179 does not guarantee rated performance. Each manufacturer shall perform testing according to the specification contained in this part of ISO 1179 to assure that components made to this part of ISO 1179 comply with the performance ratings. NOTE 1 This part of ISO 1179 applies to connectors detailed in ISO 8434-2. NOTE 2 The introduction of this part of ISO 1179 gives recommendations for ports and stud ends to be used for new designs in hydraulic and pneumatic fluid power applications.

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)