23.100.40 管道和管接头 标准查询与下载

GSO ISO 14743:2015 气动流体动力 用于热塑性管的直插式连接器

  Scope is not provided for this standard

Pneumatic fluid power -- Push-in connectors for thermoplastic tubes

GSO ISO 23309:2015 液压流体动力 组合系统 冲洗管道的方法

This International Standard specifies the procedures for flushing from the hydraulic lines of larger hydraulic fluid power systems solid particulate contamination that can be introduced during the initial build of a new hydraulic system or after maintenance or modification of an existing system. This International Standard supplements, but does not replace, the requirements of the component supplier and customer, especially when those requirements are stricter than those specified by this International Standard. This International Standard is not applicable to a) the chemical cleaning and pickling of hydraulic tubes, or b) the cleaning of major system components (see ISO/TR 10949). Verification of the cleanliness of assembled systems is covered in ISO/TS 16431.

Hydraulic fluid power systems -- Assembled systems -- Methods of cleaning lines by flushing

GSO ISO 4397:2015 流体动力系统连接器和组件 管道的标称外径和软管的标称尺寸

This International Standard specifies information on the nominal outside diameters of rigid or semi-rigid tubing and nominal hose sizes to be used with hydraulic and pneumatic fluid power connectors and associated components: a) nominal outside diameters for rigid or semi-rigid tubes, irrespective of material composition, used in fluid power; b) a list of nominal sizes for hoses made of rubber or plastic used in fluid power. NOTE Actual outside diameters and tolerances for steel tubes can be found in ISO 3304 and ISO 3305; actual dimensions and tolerances for hose inside diameters can be found in ISO 1307.

Fluid power connectors and associated components -- Nominal outside diameters of tubes and nominal hose sizes

GSO ISO 4399:2015 流体动力系统及其部件 连接器和附件部件 标称压力

This International Standard specifies a selection of nominal pressures for hydraulic and pneumatic fluid power connectors and associated components. NOTE 1 There may be a need to provide a selection of nominal pressures for connectors and associated components used in applications where the external pressure on the components is greater than the internal pressure, for example vacuum service. An International Standard that deals with this subject will be established in due course.

Fluid power systems and components -- Connectors and associated components -- Nominal pressures

EN 856:2015 橡胶软管和软管组件.橡胶覆盖钢丝增强液压型.分类

This European Standard specifies requirements for four types of rubber-covered spiral wire reinforced hydraulic hoses and hose assemblies of nominal bore from 6 to 51: Types 4SP, 4SH, R12 and R13. They are all suitable for use with:- hydraulic fluids in accordance with ISO 6743-4 with the exception of HFD R, HFD S and HFD T at temperatures ranging from -40 °C to +100 °C for types 4SP and 4SH and -40 °C to +120 °C for types R12 and R13; - water based fluids at temperatures ranging from -40 °C to 70 °C; - water fluids at temperatures ranging from 0 °C to 70 °C. This European Standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies. NOTE 1 The hoses are not suitable for use with castor oil based nor ester based fluids. NOTE 2 Hoses and hose assemblies are not be operated outside the limits of this standard. NOTE 3 Requirements for hydraulic hoses for underground mining are standardised in a separate standard.

Rubber Hoses and Hose Assemblies - Rubber-Covered Spiral Wire Reinforced Hydraulic Type - Specification

EN 857:2015 橡胶软管和软管组件.液压应用的钢丝编织增强紧凑型.分类

This European Standard specifies requirements for two types of wire braid reinforced compact hoses and hose assemblies of nominal bore from 6 to 25, types 1SC and 2SC. They are suitable for use with: - hydraulic fluids in accordance with ISO 6743-4 with the exception of HFD R, HFD S and HFD T at temperatures ranging from -40 °C to +100 °C; - water based fluids at temperatures ranging from -40 °C to +70 °C; - water at temperatures ranging from 0 °C to +70 °C. This European Standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies. NOTE 1 The hoses are not suitable for use with castor oil based nor ester based fluids. NOTE 2 Hoses and hose assemblies are not be operated outside the limits of this standard. NOTE 3 Requirements for hydraulic hoses for underground mining are standardised in separate standards.

Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification

NF E48-050-4:2015 液压传动和一般用途管接头.带ISO 261米制螺纹和O形圈密封的油口和螺纹端头.第4部分:内外六角气门栓的尺寸、设计、试验方法和要求

Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4 : dimensions, design, test methods and requirements for external hex and internal hex port plugs

KS B ISO 23309:2014 液压传动系统.系统总成.冲洗法.清洁方法

Hydraulic fluid power systems — Assembled systems — Methods of cleaning lines by flushing

KS B ISO 23309-2014(2019) 液压动力系统 - 组装系统 - 通过冲洗清洗管道的方法

Hydraulic fluid power systems — Assembled systems — Methods of cleaning lines by flushing

NF E48-058*NF ISO 7241:2014 液压流体动力. 第1部分: 快换接头的尺寸和要求

La présente Norme internationale spécifie les dimensions de raccordement et les exigences de performance de base de deux séries de raccords rapides hydraulique. Ces deux séries sont d'un usage courant et présentent des avantages technologiques similaires. La série A est utilisée principalement en Europe et est préférentielle dans le monde entier pour les machines agricoles et forestières, et la présente Norme internationale spécifie également des exigences supplémentaires pour la série A lorsqu'elle est utilisée dans des machines agricoles couvertes par l'ISO 5675. La série B est utilisée principalement en Amérique du Nord et dans l'industrie chimique.

Hydraulic fluid power - Part 1 : dimensions and requirements of quick-action couplings

BS ISO 7241:2014 液压流体动力. 快换接头的尺寸和要求

Hydraulic fluid power. Dimensions and requirements of quick-action couplings

ISO 7241:2014 液压传动.快换接头的尺寸和要求

This International Standard specifies the interface dimensions and basic performance reduirements for two Series of hydraulic quickcaction couplings. Both series are in widespread use and have Similar technological advantages. Series A is used predominantly in Europe and is preferred worldwide for agricultural and forestry machinery and this International Standard also specifies additional redquirements for SeriesAfor use in agricultural machinery applications covered in ISO 5675. Series B is used predominantly in North America and in the chemical industry.

Hydraulic fluid power - Dimensions and requirements of quick-action couplings

PD CEN/TS 16650:2014 汽油,机油,润滑油的软管接头规范.高压管接头

This Technical Specification specifies requirements for couplings of 2 in (50,8 mm), 21/2 in (63,5 mm), 3 in (76,2 mm) and 4 in (101,6 mm) nominal sizes with ribbed tails and hexagons for use at pressures not exceeding 1550 kN/m2 (225 lbf/in2). For assembly of coupling. This document is applicable to couplings which have been designed primarily for aircraft refuelling purposes, but they may also be used for other general purposes.

Specification for hose couplings for petrol@ oil and lubricants - High pressure couplings

DIN EN ISO 1179-1:2014 液体传动通用连接件. 带弹性体密封或金属对金属密封的ISO 228-1螺纹孔口和螺柱端. 第1部分: 带螺纹的孔口(ISO 1179-1-2013); 德文版本EN ISO 1179-1-2013

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013); German version EN ISO 1179-1:2013

DIN EN ISO 1179-2:2014 一般用途和液压传动的连接件. 带有合成橡胶或金属对金属密封的ISO 228-1螺纹端口和螺柱端. 第2部分:重型 (S系列) 和轻型 (L系列) 带合成橡胶密封的螺柱端 (E型) (ISO 1179-2-2013); 德文版本EN ISO 1179-2-2013

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013); Ge

NF E49-051-2*NF EN ISO 1179-2:2014 通用和液压传动用连接件.带弹性体密封件或金属对金属密封件的ISO 228-1标准螺纹开口和螺柱端头.第2部分:带弹性体密封件(E型)的重型(S系列)和轻型(L系列)螺柱端头

La présente partie de l'ISO 1179 spécifie les dimensions, les exigences de performance et les modes opératoires d'essai des éléments mâles à filetage ISO 228-1 de série lourde (série S) et de série légère (série L) avec joint élastomère (type E) qui est utilisé avec ceux-ci.Les éléments mâles de série lourde (série S) avec étanchéité de type E conformes à la présente partie de l'ISO 1179 peuvent être utilisés jusqu'à des pressions d'utilisation de 63 MPa (630 bar). Les éléments mâles de série légère (série L) avec étanchéité de type E conformes à la présente partie de l'ISO 1179 peuvent être utilisés jusqu'à des pressions d'utilisation de 25 MPa (250 bar).

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2 : heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)

KS B ISO 11926-2-2013 一般用途和流体动力连接件 采用 ISO 725 螺纹和 O 形圈密封的端口和螺柱端部 第 2 部分：重型（S 系列）螺柱端部

Connections for general use and fluid power－Ports and stud ends with ISO 725 threads and O-ring sealing－Part 2：Heavy-duty(S series) stud ends

KS B ISO 6149-3-2013 流体动力和一般用途连接件 采用ISO 261螺纹和O型圈密封的端口和螺柱端部 第3部分：轻型（L系列）螺柱端部 尺寸、设计、试验方法和要求

Connections for fluid power and general use－Ports and stud ends with ISO 261 threads and O-ring sealing－Part 3：Light-duty(L series) stud ends－Dimensions, design, test methods and requirements

KS B ISO 12151-1-2013 液压流体动力和一般用途连接件 软管接头 第1部分：带ISO 8434 3 O形圈端面密封的软管接头

Connections for hydraulic fluid power and general use－Hose fittings－ Part 1：Hose fittings with ISO 8434－3 O-ring face seal ends

KS B ISO 4397-2013 流体动力系统和部件 连接器和相关部件 管子的公称外径和软管的公称内径

Fluid power systems and components－connectors and associated components－Nominal outside diameters of tubes and nominal inside diameters of hoses