23.100.50 控制部件 标准查询与下载

BS ISO 16873:2011 液压流体动力.压力开关.安装表面

Hydraulic fluid power. Pressure switches. Mounting surfaces

ISO 16873:2011 液压液能.压力开关安装表面

This International Standard specifies the mounting surfaces for pressure switches and gives guidelines for the standardized arrangement of the connections for pressure switches and for the mounting of plates and hydraulic valves.

Hydraulic fluid power - Pressure switches - Mounting surfaces

ISO 15524:2011 气动液能.汽缸.单杆短冲程汽缸(1000 kPa(10 bar),孔径20 mm至100 mm

Pneumatic fluid power - Cylinders - Single-rod short-stroke cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm

DIN ISO 5599-1 Berichtigung 1:2011 气动液压动力.五端口定向控制阀.第1部分:无接线盒的安装接口表面(ISO 5599-1-2001).DIN ISO 5599-1-2005-12的勘误表

Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector (ISO 5599-1:2001); Corrigendum to DIN ISO 5599-1:2005-12

JIS B 8386:2011 液压流体动力.阀门.压差/流量特性的测定

Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics

ANSI/NSF 359-2011 交联聚乙烯(PEX)配水管系统用阀门

Issue 1: To establish a standard for testing inline valves.

Valves for Crosslinked Polyethylene (PEX) Water Distribution Tubing Systems

ANSI/NSF 359(i1)-2011 交联聚乙烯(PEX)配水管系统用阀门

Valves for Crosslinked Polyethylene (PEX) Water Distribution Tubing Systems

NF E49-088-2:2010 气动液压传动.电气动压力控制阀.第2部分:确定供应商文件主要特征的试验方法.

Pneumatic fluid power - Electro-pneumatic pressure control valves - Part 2 : test methods to determine main characteristics to include in the supplier's literature.

NF E49-088-1:2010 气动流体动力.电气动压力控制阀.第1部分:供应商文件的主要特征.

Pneumatic fluid power - Electro-pneumatic pressure control valves - Part 1 : main characteristics to include in the supplier's literature.

BS ISO 10094-1:2010 气动流体动力.电气压控制阀.包含在供应商文件中的主要特征

Pneumatic fluid power. Electro-pneumatic pressure control valves. Main characteristics to include in the supplier's literature

BS ISO 10041-1:2010 气动流体动力.电气压控制阀.包含在供应商文件中的主要特征

Pneumatic fluid power. Electro-pneumatic continuous flow control valves. Main characteristics to include in the supplier's literature

BS ISO 10094-2:2010 气动流体动力.电气压控制阀.包含在供应商文件中的主要特征确定测试方法

Pneumatic fluid power. Electro-pneumatic pressure control valves. Test methods to determine main characteristics to include in the supplier's literature

BS ISO 10041-2:2010 气动流体动力.电气压控制阀.包含在供应商文件中的主要特征测定的试验方法

Pneumatic fluid power. Electro-pneumatic continuous flow control valves. Test methods to determine main characteristics to include in the supplier's literature

ISO 10094-2:2010 气动液压传动.电气动压力控制阀.第2部分:需要包含在供应商文件中确定主要特征的试验方法

This part of ISO 10094 specifies the test procedures and a method of presenting the results concerning the parameters which define the main characteristics to be included in the supplier's literature of the electropneumatic continuous pressure control valves, conforming to ISO 10094-1. The purpose of this part of ISO 10094 is -to facilitate the comparison by standardizing the test methods and the presentation of the test results, and -to assist in the proper application of these components in compressed air systems. The specified tests are intended to allow comparison between the different types of continuous pressure control valves; these are not production tests to be carried out on each manufactured product.

Pneumatic fluid power - Electro-pneumatic pressure control valves - Part 2: Test methods to determine main characteristics to include in the supplier's literature

ISO 10041-1:2010 气动液压传动.电气动持续气流控制阀.第1部分:需要包含在供应商文件中的主要特征

This part of ISO 10041 specifies the characteristics of electro-pneumatic continuous flow control valves that are to be included in the supplier's literature. According to ISO 5598, continuous control valves include: ? electrically modulated pneumatic proportional flow control valves, ? pneumatic proportional flow control valves, ? flow control servo-valves. This part of ISO 10041 is limited to the characterisation of valves that exhaust into the atmosphere except for two-port valves.

Pneumatic fluid power - Electro-pneumatic continuous flow control valves - Part 1: Main characteristics to include in the supplier's literature

ISO 10041-2:2010 气动液压传动.电气动持续气流控制阀.第2部分:需要包含在供应商文件中确定主要特征的试验方法

This part of ISO 10041 specifies the test procedures and a method of presenting the results concerning the parameters that define the main characteristics to be included in the supplier's literature of electro-pneumatic continuous flow control valves, in accordance with ISO 10041-1. This part of ISO 10041 is intended to ? facilitate the comparison of these types of valves by standardizing test methods and the presentation of test results, and ? assist in the proper application of these valves in pneumatic systems. The specified tests are not production tests to be carried out on each valve manufactured.

Pneumatic fluid power - Electro-pneumatic continuous flow control valves - Part 2: Test methods to determine main characteristics to include in the supplier's literature

ISO 10094-1:2010 气动液压传动.电气动压力控制阀.第1部分:需要包含在供应商文件中的主要特征

This part of ISO 10094 specifies which characteristics of electro-pneumatic continuous pressure control valves are to be included in the supplier's literature. In accordance with ISO 5598, these control valves include ? electrically modulated pneumatic proportional pressure valves, ? pressure proportional control valves, and ? pressure servo-valves (closed loop).

Pneumatic fluid power - Electro-pneumatic pressure control valves - Part 1: Main characteristics to include in the supplier's literature

JIS B 8419:2010 气动液压传动.方向控制阀.漂泊时间和响应时间的测量

Pneumatic fluid power -- Directional control valves -- Measurement of shifting time and response time

JB/T 5120-2010 全液压转向器.摆线转阀式开心无反应型

本标准规定了摆线转阀式开心无反应型全液压转向器的术语和定义、型式、基本参数和连续尺寸、技术要求、试验装置和试验条件、试验项目和试验方法、数据处理、检验规则、标志、包装、运输、和贮存。 本标准仅适用于以液压油或性能相当的其他矿物油为工作介质的摆线转阀式开心无反应型全液压转向器。

Full-hydranlic steering control unit.Cycloid rotary valve and non reaction type

BS ISO 10770-1:2009 液压传动.电调制液压控制阀.四通流量控制阀的试验方法

Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-port directional flow-control valves