共找到 356 条与 控制部件 相关的标准,共 24 页
Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1: Test methods for four-port directional flow-control valves
This Japanese Industrial Standard has been prepared based on the first edition of ISO 16874 published in 2004 without modifying the technical contents and the structure.
Hydraulic fluid power -- Identification of manifold assemblies and their components
Road vehicles - Compressed Natural Gas (CNG) fuel system components - Part 5 : Manual cylinder valve
Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics.
Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics
Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics
本标准规定了压力不大于1.6MPa气动换向阀的一般要求、性能要求、试验方法、检验规则和产品标识。 本标准适用于以压缩空气为工作介质的一般用途的气动换向阀,包括电磁控制、气压控制、机械控制和人力控制换向阀。
Rules relating of pneumatic fluid power directional control valve
この規格は,互換性を確保するために,油正の減圧弁,シーケンス弁,アンロード弁,絞り弁及びチ工ック弁を取り付ける面の寸法及びその他の特性について規定する。
Hydraulic fluid power -- Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces
Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3 : test methods for pressure control valves.
本标准规定了液压电磁换向座阀(以下简称电磁座阀)的基本参数、技术要求、试验方法、检验规则、标志和包装等要求。 本标准适用于以液压油或性能相当的其他液体为工作介质的电磁座阀。
Hydraulic fluid power.Solenoid operated directional poppet valve
1 Scope This International Standard specifies the dimensions and provides other data relating to cavities in which two-, three- and four-port, screw-in cartridge valves are mounted in order to ensure interchangeability. It is applicable to two-, three- and four-port screw-in cartridge valves generally used in industrial and mobile equipment.
Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities
This International Standard specifies the dimensions and provides other data relating to cavities in which two-, three- and four-port, screw-in cartridge valves are mounted in order to ensure interchangeability. It is applicable to two-, three- and four-port screw-in cartridge valves generally used in industrial and mobile equipment.
Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities
Measuring methods for coefficient of discharge of safety valves
이 규격은 증기용 및 가스용의 안전 밸브(이하 안전 밸브라 한다.)의 분출 계수를 구하는
Measuring methods for coefficient of discharge of safety valves
This part of ISO 10770 describes test methods for determining the performance characteristics of electrically modulated hydraulic pressure control valves.
Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for pressure control valves
Measuring methods for coefficient of discharge of safety valves
この規格は,最高使用圧力1.6 MPaの空気圧用5ポート方向制御弁の電気コネクタのないインタフエース取付面(以下,インタフエース取付面という。)について規定する。
Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surfaces without electrical connector
この規格は,最高使用圧力1.6 MPaの空気圧用5ポート方向制御弁の電気コネクタのあるインタフエース取付面(以下,インタフエース取付面という。)について規定する。
Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surfaces with optional electrical connector
Screwed bronze plug cocks and gland cocks
This part of ISO 10770 describes test methods for determining the performance characteristics of electrically modulated hydraulic pressure control valves.
Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号