23.100.50 控制部件 标准查询与下载
共找到 356 条与 控制部件 相关的标准，共 24 页
이 규격은 상호 이해를 목적으로 사용되는 코드 시스템에 대하여 규정한다. 이 규격은 K
Pneumatic fluid power－Five－port directional control valves－Part 3：Code system for communication of valve functions
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2003-07-29
- 实施
- 2003-07-29
이 규격은 최대 정격 압력 1.6 MPa[16bar(1)]에서 사용되는 5포트 공압 방
Pneumatic fluid power－Five－port directional control valves－Part 1：Mounting interface surfaces without electrical connector
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2003-07-29
- 实施
- 2003-07-29
이 규격은 최대 정격 압력 1.6 MPa[16 bar(1)]에서 사용되는 5포트 공압
Pneumatic fluid power－Five－port directional control valves－Part 2：Mounting interface surfaces with optional electrical connector
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2003-07-29
- 实施
- 2003-07-29
Pneumatic fluid power－Five－port directional control valves－Part 3：Code system for communication of valve functions
- ICS
- 23.100.50
- CCS
- 发布
- 2003-07-29
- 实施
Pneumatic fluid power－Five－port directional control valves－Part 3：Code system for communication of valve functions
- ICS
- 23.100.50
- CCS
- 发布
- 2003-07-29
- 实施
Pneumatic fluid power－Five－port directional control valves－Part 1：Mounting interface surfaces without electrical connector
- ICS
- 23.100.50
- CCS
- 发布
- 2003-07-29
- 实施
Pneumatic fluid power－Five－port directional control valves－Part 1：Mounting interface surfaces without electrical connector
- ICS
- 23.100.50
- CCS
- 发布
- 2003-07-29
- 实施
Pneumatic fluid power－Five－port directional control valves－Part 2：Mounting interface surfaces with optional electrical connector
- ICS
- 23.100.50
- CCS
- 发布
- 2003-07-29
- 实施
Pneumatic fluid power－Five－port directional control valves－Part 2：Mounting interface surfaces with optional electrical connector
- ICS
- 23.100.50
- CCS
- 发布
- 2003-07-29
- 实施
This part of ISO 15407 specifies the following requirements for a mounting interface and electrical connector for five-port pneumatic directional control valves, sizes 18 mm and 26 mm, for use at a maximum rated pressure of 1,6 MPa [16 bar]: — dimensions and tolerances of the interface features; — port identification; — identification of the result of control-mechanism actuation; — dimensions, tolerances and specifications for optional interface electrical connector mateability. It is not applicable to the functional characteristics of interfaces. NOTE The requirements for mounting interfaces of five-port directional control valves, sizes 18 mm and 26 mm, without electrical connector are specified in ISO 15407-1. note: 1) 1 bar = 0,1 MPa = 10Pa;1 Pa = 1 N/mm
Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2003-05-16
- 实施
- 2003-05-16
This part of ISO 15407 specifies the following requirements for a mounting interface and electrical connector for five-port pneumatic directional control valves, sizes 18 mm and 26 mm, for use at a maximum rated pressure of 1,6 MPa [16 bar]: — dimensions and tolerances of the interface features; — port identification; — identification of the result of control-mechanism actuation; — dimensions, tolerances and specifications for optional interface electrical connector mateability. It is not applicable to the functional characteristics of interfaces. NOTE The requirements for mounting interfaces of five-port directional control valves, sizes 18 mm and 26 mm, without electrical connector are specified in ISO 15407-1. note: 1) 1 bar = 0,1 MPa = 10Pa;1 Pa = 1 N/mm
Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2: Mounting interface surfaces with optional electrical connector
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2003-04
- 实施
この規格は，JIS B 8372-1に規定する空気圧用減圧弁及びフィルタ付減圧弁(以下，特に表示しない場合はともに減圧弁という。)の供給者の文書に表示する主要な特性を決定するパラメータに関する試験，手順及び試験結果の表示方法について規定する。
Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2003-03-20
- 实施
この規格は，最高使用圧力1.6 MPaの空気圧用5ポート方向制御弁（サイズI8mm， 26 mm)の電気コネクタなしインタフェース取付面に適用する。
Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 1: Mounting interface surfaces without electrical connector
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2003-03-20
- 实施
この規格は，空気圧用減圧弁及びフィルタ付減圧弁(以下，特に表示しない場合は共に減圧弁という。)の供給者の文書に表示する主要持性を規定し，また，製品表示に対する要求事項につて規定する。
Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 1: Main characteristics to be included in literature from suppliers and product-making requirements
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2003-03-20
- 实施
This International Standard specifies the dimensions of 3/2 solenoid valves for four sizes of mounting interface surfaces, with three holes for flow passages, two holes for fixing screws and requirements for a sealing surface, for use at a maximum rated pressure of 1,6 MPa (16 bar). note: 1) 1 bar = 10Pa = 100 kPa = 0,1 MPa; 1 Pa = 1 N/m
Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2003-02-20
- 实施
- 2003-02-20
This International Standard specifies the dimensions of 3/2 solenoid valves for four sizes of mounting interface surfaces, with three holes for flow passages, two holes for fixing screws and requirements for a sealing surface, for use at a maximum rated pressure of 1,6 MPa (16 bar). note: 1) 1 bar = 10Pa = 100 kPa = 0,1 MPa; 1 Pa = 1 N/m
Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2003-02
- 实施
Electrically modulated hydraulic control valves－Part 2：Test methods for three-way directional flow control valves
- ICS
- 23.100.50
- CCS
- 发布
- 2002-11-27
- 实施
Pneumatic fluid power - Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2002-06-01
- 实施
- 2002-06-20
1.1この規格は，空気圧方向制御弁のポートを識別・表示について規定する。これらのポートとは，主流路接続，制御接続，パィロット供給接続をいう。
Pneumatic fluid power -- Identification of ports and control mechanisms of control valves and other components
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2002-05-20
- 实施
この規格は，電気操作形3方向流量制御弁の製品受渡試験及び形式認定試験について規定する。
Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2002-05-20
- 实施
