23.100.50 控制部件 标准查询与下载

ISO 16873:2002 液压传动.压力开关.安装表面

This International Standard specifies the mounting surfaces for pressure switches and gives guidelines for the standardized arrangement of the connections for pressure switches and for the mounting of plates and hydraulic valves.

Hydraulic fluid power - Pressure switches - Mounting surfaces

BS ISO 5599-1:2001 气压流体动力.五通方向控制阀.不带电连接器的安装接口表面

This part of ISO 5599 specifies the requirements for a mounting interface surface without electrical connector for five-port pneumatic directional control valves, for use at a maximum rated pressure of 1,6 MPa [16 bar]. It gives — dimensions and tolerances of the interface features, — port identification, and — identification of the result of control-mechanism actuation. It is not applicable to the functional characteristics of interfaces. note:1) 1 bar = 0,1 MPa = 10 Pa; 1 MPa = 1 N/mm

Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector

BS ISO 5599-2:2001 气压流体动力.五通方向控制阀.带选用电气连接器的安装接口面

This part of ISO 5599 specifies the requirements for a mounting interface surface with optional electrical connector for five-port pneumatic directional control valves, for use at a maximum rated pressure of 1,6 MPa [16 bar]. It gives — dimensions and tolerances of the interface features, — port identification, — identification of the result of control-mechanism actuation, and — dimensions, tolerances and specifications for optional interface electrical connector mating. It is not applicable to the functional characteristics of interfaces. note:1) 1 bar = 0,1 MPa = 10 Pa; 1 MPa = 1 N/mm

Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector

ISO 5599-2:2001 气压传动 五气口方向控制阀 第2部分:带可选电接头的安装面

GB／T 7940的奉部分规定了带可选电气接头的气动五气口方向控制阀，当最高使用压力为 1.6MPa时，其安装面要求如下： ——安装面外形尺寸和公差； ——气口的标识； ——控制机构驱动结果的标识； ——可选择的电气接头的尺寸、公差和规格。

Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector

BS ISO 12238:2001 气压液动.方向控制阀门.转换时间的测量

This International Standard — specifies test procedures for measuring the shifting times of electrically- or pneumatically-operated directional control valves and moving-part logic elements, — establishes a definition for shifting time, and — is intended to improve the application of pneumatic fluid power by providing users and manufacturers of pneumatic valves with a standardized test procedure for measuring the shifting time it defines.

Pneumatic fluid power - Directional control valves - Measurement of shifting time

ISO 5599-1:2001 气压传动 五气口方向控制阀 第1部分:不带电接头的安装面

GB／T 7940的本部分规定了不带电气接头的气动五气口方向控制阀，当最高使用压力为l_6MPa 时，其安装面要求如下： 安装面外形尺寸和公差； 气口的标识； 控制机构驱动结果的标识。 本部分不适用于安装面的功能特征。

Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector

ISO 12238:2001 气动方向控制阀 切换时间的测量

本标准规定了电控或气控方向控制阀和逻辑元件的切换时间的定义、测量方法以及测试结果报告 的方法，以便气动系统应用。

Pneumatic fluid power - Directional control valves - Measurement of shifting time

NF E48-423:2001 液压流体动力.减压阀、顺序阀、卸载阀、节流阀和止回阀.安装面

Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces.

JIS B 8666:2001 液压流体动力.减压阀.安装表面

この規格は，互換性を保証するために，リリーフ弁の取付面などについて規定する。この規格は，現在主に産業機械で使用されているリリーフ弁の取付面に適用する。

Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces

JIS B 8664:2001 液压流体动力.压力控制阀(不包括减压阀)、顺序活门、释荷阀、节流阀和止回阀. 安装表面

この規格は，互換性を保証するために，圧力制御弁(リリーフ弁を除く。)，シーケンス弁，アンロード弁，绞り弁及びチェック弁の取付面の寸法などについて規定する。この規格は，主に産業機械で使用する圧力制御弁，シーケンス弁，アンロード弁，絞り弁及びチェック弁の取付面に適用する。

Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces

JIS B 8665:2001 液压流体动力.阀门安装表面和插装式阀腔的识别代码

この規格は，国際規格で定める油圧バルブの取付面及びカートリッジ形弁取付穴形状の識別コードについて規定する。国際規格に決められていない取付面及びカートリッジ形弁には，この議別コードは適用されない。この規格は，機器にこの識別コードの表示を要求するものではない。

Hydraulic fluid power -- Code for identification of valve mounting surfaces and cartridge valve cavities

BS ISO 5781:2000 液压传动.减压阀、顺序阀、卸荷阀、节流阀和单向阀.安装面

This International Standard specifies, in order to ensure interchangeability, the dimensions and other characteristics of surfaces on which hydraulic pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves are mounted. It is applicable to mounting surfaces for hydraulic pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves, which represent current practice. They are generally used in industrial equipment.

Hydraulic fluid power - Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces

JIS B 8387:2000 液压流体动力.四孔模块通气阀和四孔方向控制阀.02,03,05尺寸.夹持尺寸

この規格は，4ポート形モジュラスタック形弁及び4ポート形方向制御弁のサィズ02， 03，及びO5の締付高さについて規定する。取付面の形状・寸法はJIS B 8355及びISO 4401に従い，種類の増加を防ぐとともに取付面の互換性を保つようにする。

Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions

JIS B 8386:2000 液压流体动力.阀门.压差/流体特性的测定

この規格は，定常状態でのバルブ内の通路を流れる流量によって生じる圧力降下を定義する方法を規定する。試験装置，試験方法及び試験結果の表示方法についても規定する。この規格では，類似の条件が適用される他の油圧機器にも適用される。

Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics

ISO 5781:2000 液压传动 压力控制阀(不包括溢流阀)、顺序阀、卸荷阀、节流阀和单向阀 安装面

This International Standard specifies, in order to ensure interchangeability, the dimensions and other characteristics of surfaces on which hydraulic pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves are mounted. It is applicable to mounting surfaces for hydraulic pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves, which represent current practice. They are generally used in industrial equipment.

Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces

JIS B 8660:2000 液压动力.流量和压力控制阀.试验方法

この規格は一般機械に用いられる方向制御弁，圧力制御弁及び流量制御弁の試験方法について規定する。この規格によって，共通の試験方法ガ適用できる。

Hydraulic fluid power -- Valves controlling flow and pressure -- Test methods

BS ISO 15407-1:2000 气动流体动力.尺寸为18mm和26mm的五孔方向控制阀.无电气连接器的安装界面

This part of ISO 15407 specifies the following requirements for a mounting interface for five-port pneumatic directional control valves, sizes 18 mm and 26 mm, without electrical connector, for use at a maximum rated pressure of 1,6 MPa [16 bar]: — dimensions and tolerances of the interface features; — port identification; — identification of the result of control-mechanism actuation. It is not applicable to the functional characteristics of interfaces. NOTE Requirements for mounting five-port pneumatic directional control valves of sizes 18 mm and 26 mm with optional electrical connector are given in ISO 15407-2. note:1) 1 bar = 0,1 MPa = 10 Pa;1 MPa=1 N/mm

Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector

ISO 15407-1:2000 气压传动 五气口方向控制阀、规格18mm和26mm 第1部分:不带电接头的安装面

This part of ISO 15407 specifies the following requirements for a mounting interface for five-port pneumatic directional control valves, sizes 18 mm and 26 mm, without electrical connector, for use at a maximum rated pressure of 1,6 MPa [16 bar]: — dimensions and tolerances of the interface features; — port identification; — identification of the result of control-mechanism actuation. It is not applicable to the functional characteristics of interfaces. NOTE Requirements for mounting five-port pneumatic directional control valves of sizes 18 mm and 26 mm with optional electrical connector are given in ISO 15407-2. note: 1) 1 bar = 0,1 MPa = 10Pa; 1 MPa = 1 N/mm

Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector

JIS B 8375-1:2000 气动液压动力.五阀口方向控制阀.第1部分:无电气连器的安装界面

この規格は，1.6 MPa(I6 har)の最高使用圧力の空気圧用5ポート方向制御弁の，インタフエース取付面に適用する。

Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surface without electrical connector

JIS B 8375-3:2000 气动液压动力.五阀口方向控制阀.第3部分:阀功能传送代码系统

この規格は，伝達目的に使用されるコード化体系を規定する。JIS B 8375-1及びJIS B 8375-2に規定された取付面の，各種サイズで使用されるバルブの動作機能を定義する。このコード化体系は，性能に影響を与える多くの特性(例えば，定格圧力，電気特性，流量定格，すベての幾何寸法など)については，記述していないので直接製品に過用されることはない。

Pneumatic fluid power -- Five-port directional control valves -- Part 3: Code system for communication of valve functions