23.100.50 控制部件 标准查询与下载

JIS B 8375-2:2000 气动液压动力.五阀口方向控制阀.第2部分:带任选电气连接器的安装界面

この規格は， 1.6 MPa(16 bar)の最高使用圧力の空気圧用5ポート方向制御弁の，インタフェース取付面に適用する。

Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surface with optional electrical connector

BS ISO 11727:1999 气动流体力学.控制阀和其它元部件的气门和控制机构的标识

1 This International Standard includes rules for identifying and marking ports in pneumatic directional control valves. These ports are the main flow connections, control connections and pilot supply connections. 2 This International Standard includes rules for identifying and marking electrical leads for solenoids. It is not pplicable to internal electrical connections across manifold sections, such as connections to bus systems. 3 This International Standard includes rules for identifying and marking control mechanisms of directional control valves. 4 This International Standard includes rules for identifying and marking ports and/or flow path directions in filters, regulators, lubricators, non-return (check) valves, flow control valves and other ancillary devices. 5 This International Standard does not include rules for identifying and marking ports on proportional pneumatic valves, air logic valves, cylinders, air motors, semi-rotary actuators, air compressors, air dryers or other devices not specifically described in this International Standard.

Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components

ISO 11727:1999 气压传动 控制阀和其他元件的气口控制机构的标识

1 This International Standard includes rules for identifying and marking ports in pneumatic directional control valves. These ports are the main flow connections, control connections and pilot supply connections. 2 This International Standard includes rules for identifying and marking electrical leads for solenoids. It is not applicable to internal electrical connections across manifold sections, such as connections to bus systems. 3 This International Standard includes rules for identifying and marking control mechanisms of directional control valves. 4 This International Standard includes rules for identifying and marking ports and/or flow path directions in filters, regulators, lubricators, non-return (check) valves, flow control valves and other ancillary devices. 5 This International Standard does not include rules for identifying and marking ports on proportional pneumatic valves, air logic valves, cylinders, air motors, semi-rotary actuators, air compressors, air dryers or other devices not specifically described in this International Standard.

Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components

ISO 7789:1998/Cor 1:1999 液压传动 二油口、三油口和四油口螺纹式插装阀 插装孔 技术勘误1

Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities; Technical Corrigendum 1

NF E48-440-2:1999 液压流体动力.电动液压控制阀.第2部分:三路定向流量控制阀的试验方法

Hydraulic fluid power. Electrically modulated hydraulic control valves. Part 2 : test methods for three-way directional flow control valves.

NF E48-440-1:1999 液压流体动力.电动液压控制阀.第1部分:四路定向流量控制阀的试验方法

Hydraulic fluid power. Electrically modulated hydraulic control valves. Part 1 : test methods for four-way directional flow control valves.

BS ISO 10372:1998 液压流体动力.4孔和5孔伺服阀.安装面

Specifies the dimensions of surfaces on which servovalves are mounted in order to ensure interchangeability. Applies primarily to electrohydraulic flow-control servovalves. In addition, may be used for pressure-control servovalves. If the valve is used in a three-port application, either service port (A and B) may be omitted.

Hydraulic fluid power - Four-and five-port servovalves - Mounting surfaces

NF E48-435:1998 液压流体动力.规格为02、03和05的四孔口模式排气阀和四孔口定向控制阀.夹紧尺寸

Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions.

BS ISO 6264:1998 液压流体动力.减压阀.安装面

This International Standard specifies the dimensions and other data relating to surfaces on which hydraulic pressure-relief valves are mounted in order to ensure interchangeability. It is applicable to mounting surfaces for hydraulic pressure-relief valves which represent current practice; they are generally applicable to industrial equipment.

Hydraulic fluid power - Pressure-relief valves - Mounting surfaces

ISO 10770-2:1998 液压传动 电调制液压控制阀 第2部分:三通流量控制阀的试验方法

This part of ISO 10770 describes methods for production acceptance and type (or qualification) testing of electrically modulated hydraulic three-way directional flow control valves.

Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-way directional flow control valves

ISO 10770-1:1998 液压传动 电调制液压控制阀 第1部分:四通流量控制阀的试验方法

This part of ISO 10770 describes methods for production acceptance and type (or qualification) testing of electrically modulated hydraulic four-way directional flow control valves.

Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1: Test methods for four-way directional flow control valves

ISO 7789:1998 液压传动 二油口、三油口和四油口螺纹式插装阀 插装孔

This International Standard specifies the dimensions and provides other data relating to cavities in which two-, three- and four-port, screw-in cartridge valves are mounted in order to ensure interchangeability. It is applicable to two-, three- and four-port screw-in cartridge valves generally used in industrial, agricultural, mining and mobile equipment.

Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities

BS ISO 7790:1998 液压传动 四油口叠加阀和四油口方向控制阀02、03、05、07、08和10规格 夹紧尺寸规格

Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions

ISO 6264:1998 液压传动 溢流阀 安装面

This International Standard specifies the dimensions and other data relating to surfaces on which hydraulic pressure-relief valves are mounted in order to ensure interchangeability. It is applicable to mounting surfaces for hydraulic pressure-relief valves which represent current practice; they are generally applicable to industrial equipment.

Hydraulic fluid power - Pressure-relief valves - Mounting surfaces

ISO 7790:1997 液压传动 四油口叠加阀和四油口方向控制阀02、03和05规格 夹紧尺寸

This International Standard specifies clamping dimensions of four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05, on mounting surfaces. The dimensions and sizes conform to ISO 4401 so as to ensure interchangeability of these valves and to reduce the number of fixing devices to be used. It applies to clamping dimensions of four-port modular stack valves and four-port directional control valves which represent current practice. They are generally applicable to industrial equipment.

Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions

ISO 6263:1997 液压传动 调速阀 安装面

This International Standard specifies the dimensions and other data relating to surfaces on which hydraulic compensated flow-control valves are mounted in order to ensure interchangeability. It applies to mounting surfaces for hydraulic compensated flow-control valves which represent current practice; they are generally applicable to industrial equipment.

Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces

GOST 24242-1997 容积式液压传动装置.液压装置、安装板、控制装置及电磁铁的连接孔的字母符号

Настоящий стандарт распространяется на оборудование объемных гидроприводов и устанавливает буквенные обозначения отверстий для присое

Hydraulic fluid power. Identification of component ports, subplates, control devices and electromagnets

GOST 30481-1997 容积式液压传动.四线、五线伺服调节的节流控制液压阀.安装板的平面连接尺寸

Настоящий стандарт устанавливает присоединительные размеры стыковых плоскостей, на которые монтируют дросселирующие гидрораспределите

Hydraulic fluid power. Four- and five-port servovalves. Mounting dimensions of subplates joint surfaces

NF E48-400:1996 液压流体动力.阀门安装面及筒形插装阀阀腔的标识代码

Hydraulic fluid power. Code for identification of valve mounting surfaces and cartridge valve cavities.

BS ISO 4401:1996 液压流体动力.四孔定向控制阀.安装面

Hydraulic fluid power - Four-port directional control valves - Mounting surfaces