23.100.50 控制部件 标准查询与下载
共找到 356 条与 控制部件 相关的标准，共 24 页
This document specifies the test procedures and a method of presenting results concerning the parameters which define the main characteristics to be included in the supplier's literature of the electro-pneumatic continuous pressure control valves, conforming to ISO 10094-1. The purpose of this document is: — to facilitate comparison by standardizing the test methods and the presentation of the test results, and — to assist in the proper application of these components in compressed air systems. The specified tests are intended to allow comparison between the different types of continuous pressure control valves; these are not production tests to be carried out on each manufactured product. The tests described in this document are for components with an exhaust port vented to the atmosphere. NOTE 1 The tests related to non-electrically modulated pneumatic continuous pressure control valves are specified in ISO 6953-2. NOTE 2 The tests related to electro-pneumatic continuous flow control valves are specified in ISO 10041-2. NOTE 3 ISO 6953-3 provides an alternate dynamic test method for flow-rate characteristics using an isothermal tank instead of a flow meter. However, this method measures only the decreasing flow rate part of the hysteresis curve of the forward flow and relief flow characteristics.
Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 2: Test methods to determine main characteristics to include in the supplier's literature
- ICS
- 23.100.50
- CCS
- 发布
- 2021-11-22
- 实施
本文件规定了中小吨位叉车用液压多路换向阀（以下简称多路阀）的术语和定义、分类和基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存以及质量承诺。 本文件适用于10 t及10 t以下叉车液压系统中的多路阀。
Hydraulic multi-way directional valve for medium and small tonnage forklift
- ICS
- 23.100.50
- CCS
- C344
- 发布
- 2021-09-02
- 实施
- 2021-09-26
本标准规定了纺织机械用气动微型电磁阀(以下简称“微型阀”)的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存以及质量承诺。 本标准适用于以压缩空气为工作介质，公称压力不大于0.7 MPa，主要应用于纺织机械行业阀宽为10 mm、15 mm气动微型二位三通直动式直流电磁换向阀。
Pneumatic micro solenoid valve for textile machinery
- ICS
- 23.100.50
- CCS
- C344
- 发布
- 2020-12-18
- 实施
- 2020-12-31
Hydraulic fluid power -- Code for identification of valve mounting surfaces and cartridge valve cavities
- ICS
- 23.100.50
- CCS
- 发布
- 2020-12-17
- 实施
- 2020-12-17
本文件规定了电-气压力控制阀（以下简称控制阀）的术语和定义、符号和单位、基本参数、基本要求、技术要求、试验方法、检验规则、标识、包装、贮存和质量承诺。 本文件适用于公称压力不高于1.0 MPa，公称通径不大于10 mm的电-气压力控制阀。
Electro-pneumatic pressure control valves
- ICS
- 23.100.50
- CCS
- C344
- 发布
- 2020-11-20
- 实施
- 2020-11-29
Hydraulic fluid power -- Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves
- ICS
- 23.100.50
- CCS
- 发布
- 2020-11-19
- 实施
- 2020-11-19
Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for pressure control valves
- ICS
- 23.100.50
- CCS
- 发布
- 2020-11-12
- 实施
- 2020-11-12
本标准规定了内部先导式精密减压阀的术语和定义、产品规格、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本标准适用于纺织、薄膜制造、印刷等行业，对张力进行精准、快速控制时需要使用的大流量的内部先导式精密减压阀（以下简称减压阀）。其额定输入压力不超过1.0 MPa且输出压力不超过0.8 MPa，无冻结工作温度范围为-5 ℃～60 ℃（无冻结）。
Internal pilot type precision regulators
- ICS
- 23.100.50
- CCS
- C344
- 发布
- 2020-06-30
- 实施
- 2020-07-23
This document describes test methods for determining the performance characteristics of electrically modulated hydraulic pressure control valves.
Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves
- ICS
- 23.100.50
- CCS
- 发布
- 2020-04-16
- 实施
本标准规定了气动精密减压阀的术语和定义、规格、基本要求、技术要求、试验方法、检验规则、标识、包装、贮存和质量承诺。 本标准适用于轻合金（铝等）、黄铜、钢和塑料等材料制造的气动精密减压阀。其额定输入压力不超过1 000 kPa且输出调节压力不超过800 kPa，调压灵敏度在满量程的0.18 %以内，重复精度在满量程±0.45 %以内，工作温度范围为-5 ℃～80 ℃。
Pneumatic precision pressure reducing valve
- ICS
- 23.100.50
- CCS
- C348
- 发布
- 2019-12-26
- 实施
- 2020-02-10
What is ISO 4411 - Hydraulic fluid power about? ISO 4411 discusses hydraulic fluid power. Hydraulic fluid power is generally used for low-pressure, high volume flow applications. ISO 4411 specifies methods for determining, under steady-state conditions, the pressure differential caused by the flow through any given path in a hydraulic fluid power valve. Requirements for test installations, procedures and presentation of results are specified. Who is ISO 4411 - Hydraulic fluid power for ? ISO 4411 on hydraulic fluid power is useful for: Hydraulic power valve manufacturers Hydraulic power system operators Design engineers Quality control personnel Why should you use ISO 4411
Hydraulic fluid power. Valves. Determination of differential pressure/flow rate characteristics
- ICS
- 23.100.50
- CCS
- 发布
- 2019-10-31
- 实施
- 2019-10-31
This document specifies methods for determining, under steady-state conditions, the pressure differential caused by the flow through any given path in a hydraulic fluid power valve. Requirements for test installations, procedures and presentation of results are specified.
Hydraulic fluid power — Valves — Determination of pressure differential/flow characteristics
- ICS
- 23.100.50
- CCS
- 发布
- 2019-10-03
- 实施
- 0000-00-00
What is ISO 5783 - Hydraulic fluid power about? ISO 5783 discusses hydraulic fluid power. Hydraulic fluid power is the use of fluids under pressure to generate, control, and transmit power. ISO 5783 defines an identification code for hydraulic valve mounting surfaces and for hydraulic cartridge valve cavities that are defined in other International Standards. Note 1: ISO 5783 is not applicable to mounting surfaces and cartridge valve cavities that do not conform to these International Standards. Note 2: ISO 5783 does not require that the hardware be marked with the identification code. Who is ISO 5783 -
Hydraulic fluid power. Code for identification of valve mounting surfaces and cartridge valve cavities
- ICS
- 23.100.50
- CCS
- 发布
- 2019-08-31
- 实施
- 2019-08-31
This document defines an identification code for hydraulic valve mounting surfaces and for hydraulic cartridge valve cavities that are defined in other International Standards (see Bibliography). This document is not applicable to mounting surfaces and cartridge valve cavities that do not conform to these International Standards. This document does not require that the hardware be marked with the identification code.
Hydraulic fluid power — Code for identification of valve mounting surfaces and cartridge valve cavities
- ICS
- 23.100.50
- CCS
- 发布
- 2019-07-30
- 实施
This International Standard specifies only geometrical data relating to cavities in which two-port hydraulic slip-in cartridge valves are mounted in order to ensure interchangeability. For example, this International Standard does not specify rated pressures. It applies to cavities for two-port hydraulic slip-in cartridge valves which are generally applicable to industrial equipment.
Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities (ISO 7368:2016)
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2018-09-00
- 实施
1.1 The test methods included in this standard are applicable to the air distribution systems in low-rise residential and commercial buildings. 1.2 These test methods cover four techniques for measuring the air leakage of air distribution systems. The techniques use air flow and pressure measurements to determine the leakage characteristics. 1.3 The test methods for two of the techniques also specify the auxiliary measurements needed to characterize the magnitude of the distribution system air leakage during normal operation. 1.4 A test method for the total recirculating air flow induced by the system blower is included so that the air distribution system leakage can be normalized as is often required for energy calculations. 1.5 The proper use of these test methods requires knowledge of the principles of air flow and pressure measurements. 1.6 Three of these test methods are intended to produce a measure of the air leakage from the air distribution system to outside. The other test method measures total air leakage including air leaks to inside conditioned space. 1.7 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 7. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
- ICS
- 23.100.50
- CCS
- 发布
- 2018-07-01
- 实施
Test methods of remanufactured main control valve for construction equipments
- ICS
- 23.100.50
- CCS
- 发布
- 2018-01-29
- 实施
Test methods of remanufactured main control valve for construction equipments
- ICS
- 23.100.50
- CCS
- 发布
- 2018-01-29
- 实施
This International Standard specifies only geometrical data relating to cavities in which two-port hydraulic slip-in cartridge valves are mounted in order to ensure interchangeability. For example, this International Standard does not specify rated pressures. It applies to cavities for two-port hydraulic slip-in cartridge valves which are generally applicable to industrial equipment.
Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities (ISO 7368:2016); Text in German and English
- ICS
- 23.100.50
- CCS
- J20
- 发布
- 2017-11-00
- 实施
Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors
- ICS
- 23.100.50
- CCS
- H20
- 发布
- 2017-08-09
- 实施
- 2017-08-31
