23.100.60 过滤器、密封垫和流体杂质 标准查询与下载
共找到 552 条与 过滤器、密封垫和流体杂质 相关的标准，共 37 页
This part of ISO 5782 specifies which characteristics of compressed air filters are to be included in the supplie's literature. It also specifies product-marking requirements. This part of ISO 5782 applies to compressed air filters, constructed from light alloys (aluminium, etc.), zinc diecast alloys, brass, steel and plastic, with a rated pressure of up to 1 600 kPa (16 bar) and a maximum temperature of 80 °C, designed to remove solid and liquid contaminants from compressed air by mechanical means.
Pneumatic fluid power -- Compressed-air filters -- Part 1: Main characteristics to be included in suppliers' literature and product marking requirements
- ICS
- 23.100.60
- CCS
- 发布
- 2015-09-03
- 实施
Hydraulic fluid power. Filter elements. Method for end load test
- ICS
- 23.100.60
- CCS
- J20
- 发布
- 2015-05-31
- 实施
- 2015-05-31
This International Standard specifies a method for verifying the end load rating of a hydraulic fluid power filter element. It also verifies the ability of a hydraulic fluid power filter element to withstand the designated axial loading imposed by installation and use.
Hydraulic fluid power - Filter elements - Method for end load test
- ICS
- 23.100.60
- CCS
- J20
- 发布
- 2015-05
- 实施
Hydraulic fluid power. Cleanliness of components. Inspection document and principles related to contaminant extraction and analysis, and data reporting
- ICS
- 23.100.60
- CCS
- J20
- 发布
- 2015-03-31
- 实施
- 2015-03-31
This International Standard specifies the content of an inspection document that specifies both the cleanliness requirement for the specified hydraulic fluid power component and the inspection method to be used for evaluating its cleanliness level. In addition, guidelines for relevant extraction methods and analysis methods are given. Determination of what constitutes as an appropriate cleanliness level requirement for any particular component is beyond the scope of this International Standard. ISO 12669 provides a method of determining the required cleanliness of a hydraulic system. ISO TR 10686 provides a method of relating the required cleanliness of components to the required cleanliness of the hydraulic system. For the purposes of this International Standard, approved functional liquids are considered to be components. This International Standard is applicable to the particulate contamination on the wetted surfaces and volumes of any hydraulic fluid power system component. Appearance defects and liquid or gaseous contamination are not covered by this International Standard. This International Standard does not address safety problems that might arise from hazardous materials, operations, and equipment associated with its use. The user of this International Standard is responsible for establishing appropriate safety and health practices and determining the applicability of regulatory limitations prior to use.
Hydraulic fluid power - Cleanliness of components - Inspection document and principles related to contaminant extraction and analysis, and data reporting
- ICS
- 23.100.60
- CCS
- J20
- 发布
- 2015-03
- 实施
This part of ISO 12500 specifies the test layout and test procedures required for testing coalescing filters used in compressed-air systems to determine their effectiveness in removing oil aerosols. This part of ISO 12500 provides the means to indicate performance characteristics of the pressure drop and the capability of removing oil aerosols. This part of ISO 12500 defines one method of presenting filter performance as outlet oil aerosol concentration stated in milligrams per cubic metre from results obtained under standard rating parameters.
Filters for compressed air -- Test methods -- Part 1: Oil aerosols
- ICS
- 23.100.60
- CCS
- 发布
- 2014-12-25
- 实施
This part of ISO 12500 specifies the test layout and test procedures required for testing hydrocarbon vapour adsorbent filters used in compressed-air systems to determine their effectiveness in removing hydrocarbon vapours. The performance characteristics to be identified are — adsorptive capacity; — pressure drop (Δp). This part of ISO 12500 defines one method of presenting filter performance as hydrocarbon vapour capacity, expressed in milligrams, from results obtained under test conditions.
Filters for compressed air -- Test methods -- Part 2: Oil vapours
- ICS
- 23.100.60
- CCS
- 发布
- 2014-12-25
- 实施
Hydraulic fluid power contamination control — General principles and guidelines for selection and application of hydraulic filters
- ICS
- 23.100.60
- CCS
- 发布
- 2014-12-22
- 实施
- 2014/12/22
Hydraulic fluid power — Marking of performance characteristics on hydraulic filters
- ICS
- 23.100.60
- CCS
- 发布
- 2014-12-22
- 实施
Hydraulic fluid power contamination control — General principles and guidelines for selection and application of hydraulic filters
- ICS
- 23.100.60
- CCS
- 发布
- 2014-12-22
- 实施
Hydraulic fluid power — Marking of performance characteristics on hydraulic filters
- ICS
- 23.100.60
- CCS
- 发布
- 2014-12-22
- 实施
- 2014/12/22
Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element
- ICS
- 23.100.60
- CCS
- 发布
- 2014-12-15
- 实施
Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
- ICS
- 23.100.60
- CCS
- B90
- 发布
- 2014-12-15
- 实施
- 2014/12/15
Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 1: General principles
- ICS
- 23.100.60
- CCS
- 发布
- 2014-12-15
- 实施
Hydraulic fluid power — Sequence of tests for verifying performance characteristics of filter elements
- ICS
- 23.100.60
- CCS
- J71
- 发布
- 2014-12-15
- 实施
- 2014/12/15
Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 1: General principles
- ICS
- 23.100.60
- CCS
- J20
- 发布
- 2014-12-15
- 实施
- 2014/12/15
Hydraulic fluid power-Filters-Evaluation of differential pressure versus flow characteristics
- ICS
- 23.100.60
- CCS
- J20
- 发布
- 2014-12-15
- 实施
- 2014/12/15
Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
- ICS
- 23.100.60
- CCS
- 发布
- 2014-12-15
- 实施
Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element
- ICS
- 23.100.60
- CCS
- J10
- 发布
- 2014-12-15
- 实施
- 2014/12/15
Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards
- ICS
- 23.100.60
- CCS
- Z04
- 发布
- 2014-11-30
- 实施
- 2014-11-30
