23.160 真空技术 标准查询与下载
共找到 461 条与 真空技术 相关的标准，共 31 页
Vacuum technology－Quick release couplings－Dimensions－Part 2：Screwed type
- ICS
- 23.160
- CCS
- 发布
- 2008-09-08
- 实施
This part of ISO 3669 specifies the dimensions of fixed or rotatable bolted knife-edge style bakable flanges used in vacuum systems for pressures ranging from atmospheric to as low as 10–13 Pa.
Vacuum technology - Bakable flanges - Dimensions of knife-edge flanges
- ICS
- 23.160
- CCS
- J78
- 发布
- 2008-05-30
- 实施
- 2008-05-30
Reliability test method for the vacuum valves－Part 1：Angle valves
- ICS
- 23.160
- CCS
- 发布
- 2008-04-01
- 实施
1.1 이 표준은 진공장비에서 기체의 유동을 제어하기 위하여 사용되는 진공용 앵글밸브의 신
Reliability test method for the vacuum valves-Part 1:Angle valves
- ICS
- 23.160
- CCS
- J88
- 发布
- 2008-04-01
- 实施
- 2008-04-01
Reliability test method for the vacuum valves－Part 1：Angle valves
- ICS
- 23.160
- CCS
- 发布
- 2008-04-01
- 实施
Standard for Natural Gas Diaphragm Pumps
- ICS
- 23.160
- CCS
- E98
- 发布
- 2008-01-01
- 实施
Vacuum technology. Measurement of performance characteristics of mass-spectrometer method of tightness control
- ICS
- 23.160
- CCS
- J78
- 发布
- 2008
- 实施
- 2009-05-01
Nominal diameters of components of vacuum systems. Series
- ICS
- 23.160
- CCS
- J78
- 发布
- 2008
- 实施
- 2008-09-01
This guide demonstrates proper methods for installing a central-vacuum system. Appendix X1 contains additional sources of information that may be helpful to the user of this guide. The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Guidelines for Approved Methods of Installing a Cvs (Central Vacuun System)
- ICS
- 23.160
- CCS
- J78
- 发布
- 2007-10-23
- 实施
This part of ISO 3669 specifies the dimensions of fixed or rotatable bolted knife-edge style bakable flanges used in vacuum systems for pressures ranging from atmospheric to as low as 10–13 Pa.
Vacuum technology - Bakable flanges - Part 2: Dimensions of knife-edge flanges
- ICS
- 23.160
- CCS
- J78
- 发布
- 2007-09-01
- 实施
本标准规定了复合分子泵的型式和基本参数，技术要求，测试方法，检验规则，标志、包装、运输和贮存等。 本标准适用于具有前级泵、变频电源的复合分子泵（以下简称泵）。
Vacuum technology.Hybrid molecular pumps
- ICS
- 23.160
- CCS
- J78
- 发布
- 2007-08-28
- 实施
- 2008-02-01
本标准规定了滑阀真空泵的型式与参数、技术要求、抽样及判定、试验方法、检验规则及标牌、标志、包装和贮存等。 本标准适用于各种类型的单级、双级滑阀真空泵（以下简称泵）。
Vacuum technology.Rotary plunger vacuum pump
- ICS
- 23.160
- CCS
- J78
- 发布
- 2007-08-28
- 实施
- 2008-02-01
本标准规定了真空-加压浸渍设备的型式与基本参数、技术要求、测试方法、检验规则及标志、包装和运输等要求。 本标准适用于以增加电气元件的绝缘电阻、耐压强度及减少介质损耗和增加木材的强度及木材、纺织物的防腐等为目的的真空，加压浸渍设备（以下简称设备）。
Vacuum technology.Vacuum - pressure impregnate plant
- ICS
- 23.160
- CCS
- J78
- 发布
- 2007-08-28
- 实施
- 2008-02-01
本标准规定了液环真空泵（以下简称泵）验收测量条件和内容要求、装置和方法、验收测量前的准备、测量结果的换算及测试报告的内容。 本标准适用于用水或其他液体做工作介质的液环真空泵。
Vacuum technology.Acceptance specifications for liquid ring vacuum pumps
- ICS
- 23.160
- CCS
- J78
- 发布
- 2007-08-28
- 实施
- 2008-02-01
本标准规定了涡轮分子泵的型式和基本参数，技术要求，测试方法，检验规则，标志、包装、运输和贮存等。 本标准适用于具有前级泵、变频电源的涡轮分子泵（以下简称泵）。
Vacuum technology.Turbomolecular pumps
- ICS
- 23.160
- CCS
- J78
- 发布
- 2007-08-28
- 实施
- 2008-02-01
本校规规定了间歇式食品冷冻真空干燥设备的产品分类、要求、试验方法、检验规则、标志、使用说明书、包装、运输、贮存。 本标准适用于间歇式食品冷冻真空干燥设备的生产和验收。
Batch type food freeze-drying plant
- ICS
- 23.160
- CCS
- J78
- 发布
- 2007-07-24
- 实施
- 2007-12-01
This part of ISO 9803 specifies mounting dimensions for vacuum pipeline fittings (elbows, tees and crosses) of knife-edge flanges for nominal bores from 16 mm to 200 mm.
Vacuum technology - Mounting dimensions of pipeline fittings - Knife-edge flange type
- ICS
- 23.160
- CCS
- J78
- 发布
- 2007-06-29
- 实施
- 2007-06-29
