25.030 标准查询与下载

GSO ISO/ASTM 52925:2024 聚合物增材制造 原料 激光粉末床熔合零件的材料鉴定

This document provides guidance and recommendations for the qualification of polymeric materials intended for laser-based powder bed fusion of polymers (PBF-LB/P). The parameters and recommendations presented in this document relate mainly to the material polyamide 12 (PA12), but references are also made to polyamide 11 (PA11). The parameters and recommendations set forth herein cannot be applicable to other polymeric materials.

Additive manufacturing of polymers — Feedstock materials — Qualification of materials for laser-based powder bed fusion of parts

BS EN ISO/ASTM 52939:2023 建筑增材制造 资格原则 结构和基础设施元素

Additive manufacturing for construction. Qualification principles. Structural and infrastructure elements

EN ISO/ASTM 52909:2024 金属增材制造 成品零件性能 金属零件机械性能的方向和位置依赖性 (ISO/ASTM 52909:2024)

This document covers supplementary guidelines for evaluation of mechanical properties including static/quasi-static and dynamic testing of metals made by additive manufacturing (AM) to provide guidance toward reporting when results from testing of as-built specimen or specimen cut out from AM parts made by this technique or both. This document is provided to leverage already existing standards. Guidelines are provided for mechanical properties measurements and reporting for additively manufactured metallic specimen as well as those cut out from AM parts. This document does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use. This document expands upon the nomenclature of ISO/ASTM 52900 and principles of ISO 17295 and extends them specifically to metal additive manufacturing. The application of this document is primarily intended to provide guidance on orientation designations in cases where meaningful orientation/direction for AM cannot be obtained from available test methods.

Additive manufacturing of metals - Finished part properties - Orientation and location dependence of mechanical properties for metal parts (ISO/ASTM 52909:2024)

24/30489463 DC BS EN ISO/ASTM 52940 陶瓷增材制造 原料 槽光聚合中陶瓷浆料的表征

BS EN ISO/ASTM 52940 Additive manufacturing of ceramics — Feedstock materials — Characterization of ceramic slurry in vat photopolymerization

DB41/T 2589-2024 增材制造 立体光固化后处理工艺规程

Additive manufacturing stereolithography post-processing process procedures

GSO ISO/IEC 23510:2024 信息技术 3D 打印和扫描 增材制造服务平台 (AMSP) 框架

This document specifies the framework for an Additive Manufacturing Service Platform (AMSP). The following elements are within the scope of this document: —    Overview introducing the stakeholders and workflow of an AMSP. —    Requirements specifying various prerequisite conditions from different aspects. —    Framework defining a general functional architecture based on the identified requirements. —    Use cases showing typical work modes of an AMSP. This document is applicable when individuals or organizations (e.g. commercial enterprises, government agencies and non-profit organizations) build an AMSP or improve existing ones to provide 3D printing and other services specific to the submission, design and creation of AM parts.

Information technology — 3D printing and scanning — Framework for an Additive Manufacturing Service Platform (AMSP)

BS EN ISO/ASTM 52945:2024 IEEE 行业连接 (IEEE-IC) 标准路线图：脑机接口神经技术

Additive manufacturing for automotive. Qualification principles. Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes

24/30486153 DC BS EN ISO/ASTM DIS 52919 增材制造 资格原则 金属铸造砂型的测试方法

BS EN ISO/ASTM DIS 52919 Additive manufacturing — Qualification principles — Test methods for metal casting sand mould

24/30486156 DC BS EN ISO/ASTM 52959 金属增材制造 测试制品 用于晶格设计的压缩验证优惠券

BS EN ISO/ASTM 52959 Additive Manufacturing of metals — Test artefacts — Compression validation coupons for lattice design

DB32/T 4605-2023 增材制造 金属激光粉末床熔融设备验收试验方法

Acceptance test method for metal laser powder bed fusion equipment for additive manufacturing

BS EN ISO/ASTM 52935:2023 金属增材制造 资格原则 协调人员资质

Additive manufacturing of metals. Qualification principles. Qualification of coordination personnel

BS EN ISO/ASTM 52908:2023 金属增材制造 成品零件属性 粉末床熔合生产的零件的后处理、检验和测试

Additive manufacturing of metals. Finished part properties. Post-processing, inspection and testing of parts produced by powder bed fusion

23/30481404 DC BS EN ISO/ ASTM 52929 金属增材制造 粉床熔融 材料数据表中材料属性的表示

BS EN ISO/ ASTM 52929. Additive manufacturing of metals. Powder bed fusion. Presentation of material properties in material data sheets

ISO/ASTM 52926-1:2023 金属增材制造 资格原则 第 1 部分：操作人员的一般资格

Additive manufacturing of metals — Qualification principles — Part 1: General qualification of operators

ISO/ASTM 52926-3:2023 金属增材制造 资格原则 第 3 部分：PBF-EB 操作员资格

Additive manufacturing of metals — Qualification principles — Part 3: Qualification of operators for PBF-EB

ISO/IEC FDIS 3532-2:2023 信息技术 基于医学图像的 3D 打印建模 第2部分：分割

Information technology — Medical image-based modelling for 3D printing — Part 2: Segmentation

ISO/ASTM 52926-2:2023 金属增材制造 资格原则 第 2 部分：PBF-LB 操作员资格

This document identifies the capabilities and responsibilities required for the qualification of the AM operators on the field of the additive manufacturing technologies dealing with metallic parts production, specifically for the employment of powder bed fusion – laser beam with metals (PBF-LB/M). This document identifies criteria for the theoretical and practical assessment of personnel operating PBF-LB/M machines. The activities and procedures foreseen to be performed by the PBF-LB/M operator are also part of this document. This document is intended to provide an outline for qualification of AM machine operators in general industrial applications. Where industry-specific requirements exist for the qualification of AM operators, such as ISO/ASTM 52942 for aerospace applications, those industry-specific standards are used instead of this document.

Additive manufacturing of metals — Qualification principles — Part 2: Qualification of operators for PBF-LB

ISO/ASTM 52926-4:2023 金属增材制造 资格原则 第 4 部分：DED-LB 操作员资格

Additive manufacturing of metals — Qualification principles — Part 4: Qualification of operators for DED-LB

ISO/ASTM 52926-5:2023 金属增材制造 资格原则 第 5 部分：DED-Arc 操作员资格

This document identifies the capabilities and responsibilities required for the qualification of the AM operators on the field of the additive manufacturing technologies dealing with metallic parts production, specifically for the employment of directed energy deposition – arc with metals (DED- Arc/M). This document identifies criteria for the theoretical and practical assessment of personnel operating DED-Arc/M machines. The activities and procedures foreseen to be performed by the DED-Arc/M operator are also part of this document. This document is intended to provide an outline for qualification of AM machine operators in general industrial applications.

Additive manufacturing of metals — Qualification principles — Part 5: Qualification of operators for DED-Arc

BS EN ISO/ASTM 52924:2023 聚合物的增材制造 资格原则 零件属性分类

Additive manufacturing of polymers. Qualification principles. Classification of part properties