25.030 标准查询与下载
共找到 127 条与 相关的标准，共 9 页
Additive manufacturing - General principles - Part 4: Overview of data processing (ISO 17296-4:2014); German version EN ISO 17296-4:2016
- ICS
- 25.030
- CCS
- J59
- 发布
- 2016-12
- 实施
Dieser Teil der ISO 17296 beschreibt die Prozessgrundsätze der additiven Fertigungsverfahren (en: Additive Manufacturing, AM). Er enthält auch eine Übersicht der bestehenden Prozesskategorien, welche aufgrund der Entwicklung neuer Technologien nicht allumfassender Natur ist und dies auch nicht sein kann. Dieser Teil der ISO 17296 erklärt, wie verschiedene Prozesskategorien verschiedene Arten von Werkstoffen verwenden, um eine Produktgeometrie zu formen. Er erklärt auch, welche Arten von Werkstoffen in den verschiedenen Prozesskategorien verwendet werden. Spezifikationen für Ausgangswerkstoffe und Anforderungen an Bauteile, die aus Kombinationen mehrerer verschiedener Prozesse und Ausgangswerkstoffe gefertigt werden, werden in weiteren separaten Normen geliefert und werden daher nicht durch diesen Teil der ISO 17296 abgedeckt. Dieser Teil der ISO 17296 beschreibt die gesamtheitlichen Grundsätze dieser weiteren Normen.
Additive manufacturing - General principles - Part 2: Overview of process categories and feedstock
- ICS
- 25.030
- CCS
- J30
- 发布
- 2016-09
- 实施
Dieser Teil der ISO 17296 betrifft die Grundanforderungen der Prüfung von Bauteilen, welche durch additive Fertigungsverfahren entstanden sind. Dieser Teil der ISO 17296 bestimmt die Hauptqualitätseigenschaften von Bauteilen, bestimmt die entsprechenden Prüfverfahren und empfiehlt den Umfang und Inhalt von Prüfungen und Liefervereinbarungen. Dieser Teil der ISO 17296 ist darauf ausgerichtet, die Kommunikation hinsichtlich der hauptsächlichen Qualitätseigenschaften zwischen Maschinenhersteller, Ausgangswerkstofflieferanten, Maschinenanwendern, Bauteileanbietern und Kunden zu vereinfachen. Er gilt immer, wenn additive Fertigungsverfahren zur Anwendung kommen.
Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods
- ICS
- 25.030
- CCS
- J30
- 发布
- 2016-09
- 实施
Dieser Teil der ISO 17296 deckt die grundlegenden Überlegungen hinsichtlich des Datenaustausches bei der additiven Fertigung ab. Er bestimmt Begriffe, welche den Austausch von Informationen ermöglichen, indem Geometrien und Bauteile so beschrieben werden, dass sie der additiven Fertigung unterzogen werden können. Die Methoden für den Datenaustausch legen die Dateiformate, die Formatierung solcher Dateien und wofür diese verwendet werden können dar. Dieser Teil der ISO 17296 ermöglicht die Spezifikation eines geeigneten Formats für den Datenaustausch, beschreibt die bestehenden Entwicklungen zur additiven Fertigung von 3-D-Geometrien, beschreibt bestehende Dateiformate, die als Teil der bestehenden Entwicklungen verwendet werden, und ermöglicht das Verstehen notwendiger Funktionen des Datenaustausches für die Anwender dieser Internationalen Norm. Dieser Teil der ISO 17296 ist an Anwender und Hersteller, welche additive Fertigungsverfahren und zugehörige Softwaresysteme nutzen, gerichtet. Die Norm ist überall dort anwendbar, wo additive Fertigungsverfahren eingesetzt werden. Das betrifft vor allem die folgenden Bereiche und Personen: Herstellung von additiven Fertigungsanlagen und deren Zubehör inklusive Software; Software-Ingenieure, die mit CAD/CAE-Systemen arbeiten; Entwickler von Reverse-Engineering-Systemen; Prüfstellen, welche erforderliche und tatsächliche Geometrien vergleichen wollen.
Additive manufacturing - General principles - Part 4: Overview of data processing
- ICS
- 25.030
- CCS
- J30
- 发布
- 2016-09
- 实施
Additive manufacturing for medical — General principles — Additive manufacturing of non-active implants
- ICS
- 25.030
- CCS
- 发布
- 2011-04
- 实施
Additive manufacturing of metals — Non-destructive testing and evaluation — Defect detection in parts
- ICS
- 25.030
- CCS
- 发布
- 1964-11
- 实施
This standard sets requirements for the qualification, quality assurance and post processing for metal parts made by laser powder bed fusion. This standard defines methods and procedures for testing and qualification of various characteristics of additively manufactured metal parts, in accordance to ISO 17296-3:2014 Classes H and M. The standard is intended to be used by part providers and/or customers of parts. This standard is a top-level standard in the hierarchy of additive manufacturing standards in that it is intended to apply to metallic parts made by additive manufacturing. The standard defines qualification procedures and acceptance criteria where appropriate to meet defined quality levels.
Additive manufacturing of metals - Finished Part properties - Post-processing, inspection and testing of parts produced by powder bed fusion (ISO/ASTM DIS 52908:2022)
- ICS
- 25.030
- CCS
- 发布
- 实施
This document defines test methods for sand molds for metal casting produced by means of additive manufacturing technologies. The test methods include the determination of mechanical and physical properties such as, but not limited to, tensile strength, transverse strength, gas permeability, and also others.
Additive manufacturing - Qualification principles - Test method for sand molds for metal foundries (ISO/ASTM DIS 52919:2024)
- ICS
- 25.030
- CCS
- 发布
- 实施
This document defines the requirements for building and construction projects in which additive manufacturing (AM) techniques are used. The requirements are independent of the material and printing method used. This document specifies the criteria for additive manufacturing processes and quality-relevant characteristics and factors along the AM system operations and defines activities and sequences within an AM cell (Additive manufacturing site) and project. This standard applies to all additive manufacturing technologies in building and construction (load bearing & non-load bearing), structural and infrastructure building elements for residential and commercial applications and follows an approach oriented to the manufacturing process.. Local H&S standards and environmental aspects are not covered in this standard but should be applied. Design approvals, material property characterisation and testing are are not covered in this standard.
Additive Manufacturing for construction - Qualification principles - Structural and infrastructure elements (ISO/ASTM/DIS 52939:2022)
- ICS
- 25.030
- CCS
- 发布
- 实施
Additive manufacturing - Design - Requirements, guidelines and recommendations (ISO/ASTM DIS 52910:2022)
- ICS
- 25.030
- CCS
- 发布
- 实施
This standard is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of quality with the aid of this standard. This standard applies to parts that have been manufactured from a thermoplastic polymer by means of laser sintering (LS) or material extrusion (MEX). Its applicability to other processes for polymers shall be checked in the specific case. The quality grades apply to parts that have not been post-processed after unpacking from the build space and the removal of possible support structures.
Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM/FDIS 52924:2023)
- ICS
- 25.030
- CCS
- 发布
- 实施
This Standard specifies personnel qualification requirements for industrial manufacturing centres regarding coordination of additive manufacturing (AM) production. The AM Coordinator is responsible for translating part requirements into manufacturing requirements such as: - Assessing whether part information (likely beyond 3d file) is complete - Assessing whether the part can be manufactured as specified and selecting appropriate manufacturing processes. - Managing the quality control aspects of manufacturing (e.g. route card)
Additive manufacturing of metals – Qualification principles – Qualification of AM coordination personnel(ISO/ASTM DIS 52935:2022)
- ICS
- 25.030
- CCS
- 发布
- 实施
This document defines the requirements for manufacturing centers, in which additive manufacturing methods are used (referred to below as additive manufacturing centers), which are independent of the material and manufacturing method used. This document specifies criteria for additive manufacturing processes as well as quality-relevant characteristics and factors along the process chain and defines activities and sequences within an additive manufacturing center. This document is applicable to the additive manufacturing technologies defined according to DIN EN ISO/ASTM 52900 and follows an approach oriented to the manufacturing process.
Additive manufacturing - Qualification principles - Requirements for industrial additive manufacturing processes and production sites (ISO/ASTM/FDIS 52920:2023)
- ICS
- 25.030
- CCS
- 发布
- 实施
This document specifies requirements and describes aspects for the lifecycle management of metal feedstock materials for powder based additive manufacturing processes. Those aspects include: • Powder properties, • Powder lifecycle, • Test methods and • Powder quality assurance. Note : This document can be used by manufacturers of metal powders, purchasers of powder feedstock for additive manufacturing, those responsible for the quality assurance of additively manufactured parts and suppliers of measurement and testing equipment for characterizing metal powders for use in powder-based additive manufacturing processes
Additive manufacturing of metals - Feedstock materials - Powder life cycle management (ISO/ASTM DIS 52928:2022)
- ICS
- 25.030
- CCS
- 发布
- 实施
Additive manufacturing - Test artifacts - Geometric capability assessment of additive manufacturing systems (ISO/ASTM DIS 52902:2021)
- ICS
- 25.030
- CCS
- 发布
- 实施
This document specifies requirements for the additive manufacturing of metallic parts with directed energy deposition in the aerospace industry. These can be additively generated parts or additively generated additions to existing parts. Within the application scope of this document, wire is used as feedstock, and arc processes (gas-shielded metal arc processes, Tungsten inert gas processes, plasma arc processes) are the main energy source. This document is to be used in conjunction with the engineering documents, if required by the engineering authority.
Additive manufacturing for aerospace - Process characteristics and performance - Part 2: Directed energy deposition using wire and arc (ISO/ASTM DIS 52943‑2:2023)
- ICS
- 25.030
- CCS
- 发布
- 实施
1.1 This practice describes the operation and production control of metal powder bed fusion (PBF) machines and processes to meet critical applications such as commercial aerospace components and medical implants. The requirements contained herein are applicable for production components and mechanical test specimens using powder bed fusion (PBF) with both laser and electron beams. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appro-priate safety, health, and environmental practices and deter-mine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for the Development of International Standards, Guides and Recom-mendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Additive manufacturing of metals - Process characteristics and performance - Metal powder bed fusion process to meet critical applications (ISO/ASTM DIS 52904:2022)
- ICS
- 25.030
- CCS
- 发布
- 实施
This document specifies requirements and describes aspects for the lifecycle management of metal feedstock materials for powder based additive manufacturing processes. Those aspects include: • Powder properties, • Powder lifecycle, • Test methods and • Powder quality assurance. Note : This document can be used by manufacturers of metal powders, purchasers of powder feedstock for additive manufacturing, those responsible for the quality assurance of additively manufactured parts and suppliers of measurement and testing equipment for characterizing metal powders for use in powder-based additive manufacturing processes
Additive manufacturing of metals - Feedstock materials - Powder life cycle management (ISO/ASTM FDIS 52928:2024)
- ICS
- 25.030
- CCS
- 发布
- 实施
This document defines testing coupons and methods for the evaluation of the compression strength of AM lattice designs. The standardized test coupons will accommodate the application of a variety of lattice designs, while standardizing the evaluation method. This document is generally intended to be used in validation or verification activities for an additively manufactured component that incorporates a lattice or porous (non-solid) design. Details may include limits or requirements for minimum repeated elements and relative dimensions of the specimen. Note: Due to inherent variability across the manufacturing of AM components, evaluation methods are needed. Specifically, when an eventual component is intended to be subjected to compressive loads, a representative testing coupon is needed to represent the component to undergo destructive evaluation as a surrogate for the component itself.
Additive Manufacturing of metals - Test artefacts - Compression validation coupons for lattice designs (ISO/ASTM DIS 52959:2024)
- ICS
- 25.030
- CCS
- 发布
- 实施
This document specifies basic content and relevant parameters to be reported in material data sheets. Individual additions and extensions are permissible. This document is intended for manufacturers of PBF-LB/M or PBF-EB/M equipment, powder suppliers, service providers and users of the additively manufactured components.
Additive manufacturing of metals - Powder bed fusion - Presentation of material properties in material data sheets (ISO/ASTM DIS 52929:2023)
- ICS
- 25.030
- CCS
- 发布
- 实施
