25.040.10 机械加工中心 标准查询与下载

CNS 15077-3-2008 切削中心机之检验条件－第3部：具整合型分段指示或连续万向分度头之机器几何检验(垂直Ｚ轴)

Test conditions for machining centres - Part 3 : Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)

JB/T 10793.2-2007 高精度加工中心.第2部分:立式机床.精度检验

JB/T 10793 的本部分规定了高精度立式加工中心的几何精度、位置精度、工作精度检验的要求及方法。 本部分适用于基本上具有四个数控轴线 , 其中三个线性轴线（X、Y、Z）行程至2000mm和一个回转轴线（B）的高精度立式加工中心。 线性轴线行程大于2000mm的高精度立式加工中心也可参照使用。

High precision machining centers.Part 2: Accuracy tests for machines with vertical spindle

JB/T 10793.1-2007 高精度加工中心 第1部分:卧式机床 精度检验

JB/T10793 的本部分规定了高精度卧式加工中心的几何精度、定位精度和重复定位精度（包括工件夹持托板）、工作精度检验的要求及方法。 本部分适用于基本上具有四个数控轴线，其中三个线性轴线（X 、Y 、Z）行程至 2000mm 和一个回转轴线（B（上标´））的高精度卧式加工中心。 线性轴线行程大于 2000mm 的高精度卧式加工中心也可参照使用。

High precision machining centres- Part 1: Accuracy tests for machines with horizontal spindle

CNS 15077-8-2007 切削中心机之检验条件－第8部：在三个坐标平面内之轮廓性能评估

本标准适用于检验切削中心机之轮廓性能之方法，亦适用于数值控制铣床等，依CNS 14637〔数值控制工具机圆弧检验通则〕在3个坐标平面（XY，YZ与XZ）内进行圆弧检验以评估其径向偏差F与圆弧偏差G。

Test conditions for machining centers - Part 8 : Evaluation of contouring performance in the three coordinate planes

CNS 15077-1-2007 切削中心机之检验条件－第1部：具水平主轴与附属头之几何检验(水平Ｚ轴)

本标准适用于CNS 14635〔无负载或精加工情况下工具机运转之几何精度〕规定，具水平主轴(亦即水平Z轴)之切削中心机(或亦适用之数值控制铣床、搪床等)几何检验。本标准亦适用于具有4个数值控制轴之切削中心机，其中三轴为长度在2000 mm以下之线性轴(X, Y与Z轴)，另一则为旋转

Test conditions for machining centers - Part 1 : Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)

CNS 15077-2-2007 切削中心机之检验条件－第2部：具垂直主轴或万向头具垂直向主旋转轴机器之几何检验(垂直Ｚ轴)

本标准适用于CNS 14635〔无负载或精加工情况下工具机运转之几何精度〕之规定，具立式主轴(亦即垂直Z轴)之切削中心机(或亦适用之数值控制铣床、搪床等)之几何检验。本标准规定具有三个长度在2000 mm以下线性轴(X, Y与Z轴)之数值控制轴的切削中心机，亦可适用于溜板，通心轴(q

Test conditions for machining centres - Part 2 : Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)

CNS 15077-4-2007 切削中心机之检验条件－第4部：线性轴与旋转轴之定位精度与重现性

本标准适用于CNS 14636〔数值控制工具机定位精度暨重现性检验通则〕之规定，切削中心机之长度在2000 mm以下线性轴及旋转轴之定位检验许可差。

Test conditions for machining centers - Part 4 : Accuracy and repeatability of positioning of linear and rotary axes

CNS 15077-5-2007 切削中心机之检验条件－第5部：工件夹持托板之定位精度与重现性

本标准适用于CNS 14635〔无负载或精加工情况下工具机运转之几何精度〕与CNS 14636〔数值控制工具机定位精度暨重现性检验通则〕之规定，用于评估个别托板之定位重现性及与附属于一特定机器之一批托板之整体定位精度之检验方法。在制造系统中工件或夹持工件之夹具之定位精度，

Test conditions for machining centers - Part 5 : Accuracy and repeatability of positioning of work-holding pallets

CNS 15077-7-2007 切削中心机之检验条件－第7部：精加工之试件精度

本标准适用于CNS 14635〔无负载或精加工情况下工具机运转之几何精度〕，规定精加工情况下标准试件之一系列切削检验，以及试件本身之特性与尺度。本标准提供评估机器切削精度之最低要求，不同或更严谨、费用更高之检验可在供货商或制造商与使用者协议下进行。

Test conditions for machining centers - Part 7 : Accuracy of finished test piece

NF E60-172-10*NF ISO 10791-10:2007 机械加工中心的试验条件.第10部分:热变形的评估

Test conditions for machining centres - Part 10 : evaluation of thermal distortions.

BS ISO 10791-10:2007 机械加工中心的试验条件.热变形的评定

This part of ISO 10791 specifies, with reference to ISO 230-3, tests for the evaluation of thermal distortions of the machine structure and positioning system, up to 2000mm in length, of machining centres. It gives three test methods: — environmental temperature variation error; — thermal distortion caused by a rotating spindle; — thermal distortion caused by moving linear axes. There is no intention of assigning any numerical tolerances associated with the tests specified.

Test conditions for machining centres - Evaluation of thermal distortions

ISO 10791-10:2007 机械加工中心的试验条件.第10部分:热畸变的评定

This part of ISO 10791 specifies, with reference to ISO 230-3, tests for the evaluation of thermal distortions of the machine structure and positioning system, up to 2000mm in length, of machining centres. It gives three test methods: — environmental temperature variation error; — thermal distortion caused by a rotating spindle; — thermal distortion caused by moving linear axes. There is no intention of assigning any numerical tolerances associated with the tests specified.

Test conditions for machining centres - Part 10: Evaluation of thermal distortions

DIN EN 12417:2007 机床.安全性.加工中心

1.1 This standard specifies the technical safety requirements and protective measures to be adopted by persons undertaking the design,construction and supply(including installation and dismantling,with arrangements for transport and maintenance)of machining centres(see 3.1). 1.2 This standard takes account of intended use including reasonably foreseeable misuse,maintenance,cleaning,and setting operations.It presumes access to the machine from all directions.It describes means to reduce risks to operators and other exposed persons. 1.3 This standard also applies to the workpiece transfer devices when they form an integral part of the machine. 1.4 This standard deals with significant hazards relevant to machining centres when they are used as intended and under the conditions foreseen by the manufacturer(see clause 4). 1.5 Hazards arising from other metal working processes(e.g. grinding,turning,forming,EDM,laser processing)are covered by other standards(see Bibliography). 1.6This standard applies to machines which are manufactured after (its date of publication).

Machine tools - Safety - Machining centres; German version EN 12417:2001+A1:2006

JB/T 7416-2007 数控坐标镗床技术条件

本标准规定了数控坐标镗床的制造和验收要求。 本标准适用于工作台面宽度小于或等于2000mm的M级和P级精度等级的单柱和双柱数控坐标镗床。

Nc jig boring machines Specifications

ISO 10791-6:1998/Cor 1:2004 加工中心检验条件.第6部分:进给率、速度和插补精度.技术勘误1

This is Technical Corrigendum 1 to ISO 10791-6-1998 (Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations)

Test conditions for machining centres - Part 6: Accuracy of feeds, speeds and interpolations; Technical Corrigendum 1

KS C IEC 60877-2003(2008) 确保工业过程测量和控制设备在氧气服务中的清洁度的程序

Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service

BS EN 12417:2001+A2:2009 机床.安全性.加工中心

1.1 This standard specifies the technical safety requirements and protective measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of machining centres (see 3.1). 1.2 This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations. It presumes access to the machine from all directions. It describes means to reduce risks to operators and other exposed persons. 1.3 This standard also applies to the workpiece transfer devices when they form an integral part of the machine. 1.4 This standard deals with significant hazards relevant to machining centres when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). 1.5 Hazards arising from other metal working processes (e.g. grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography). 1.6 This standard applies to machines which are manufactured after (its date of publication).

Machine tools - Safety - Machining centres

BS EN 12417:2001 机床.安全性.加工中心

1 This standard specifies the technical safety requirements and protective measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of machining centres (see 3.1). 2 This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations. It presumes access to the machine from all directions. It describes means to reduce risks to operators and other exposed persons. 3 This standard also applies to the workpiece transfer devices when they form an integral part of the machine. 4 This standard deals with significant hazards relevant to machining centres when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). 5 Hazards arising from other metal working processes (e.g. grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography). 6 This standard applies to machines which are manufactured after (its date of publication).

Machine tools - Safety - Machining centres

EN 12417:2001 机床的安全性.机械加工中心;包含修改件A2: 2009;合并勘误表2010年3月

This standard specifies the technical safety requirements and protective measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of machining centres (see 3.1).This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations. It presumes access to the machine from all directions. It describes means to reduce risks to operators and other exposed persons.This standard also applies to the workpiece transfer devices when they form an integral part of the machine.This standard deals with significant hazards relevant to machining centres when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). Hazards arising from other metal working processes (e. g. grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography).This standard applies to machines which are manufactured after (its date of publication).

Machine tools - Safety - Machining centres (Incorporates Amendment A2: 2009; Incorporating corrigendum March 2010)

BS ISO 10791-8:2001 加工中心的试验条件.三坐标平面仿形加工性能的估计

This part of ISO 10791 specifies a method of checking the contouring performance of machining centres (or numerically controlled milling machines, etc., where applicable) by conducting circular tests in the three coordinate planes (XY, YZ and XZ) and by evaluating the radial deviation, F, and circular deviation, G, in accordance with ISO 230-4. NOTE Measurements of circular movements can be carried out by different methods as described in 6.6 of ISO 230-1:1996. These methods consist of using a rotating one-dimensional probe and a test mandrel, a circular masterpiece and a two-dimensional probe, or a telescoping ball bar. Other test methods may be applied if the accuracy of the equipment is the same as (or better than) the accuracy of the methods described. Influences of typical machine deviations on circular paths are shown in annex B of ISO 230-4:1996. The purpose of the checks by circular tests described in this part of ISO 10791 is to verify the circular movement — only in one position per coordinate plane of the machine, — at only one feed rate, and — to repeat the test once in the opposite contouring direction. The purpose of this part of ISO 10791 is not to provide a means of analysing the causes for the measured circular deviations, but to offer the user a method for periodic checking of the machine tool. It is recommended to carry out the tests of this part of ISO 10791 once the machine tool has satisfactorily undergone the acceptance tests and to use these results as a basis for comparison when carrying out periodic checks. Therefore, acceptable deviations from the initial results shall be decided by the user. If the tests are used for machine acceptance purposes, the supplier/manufacturer and the user shall agree on specific diameters, feed rates and tolerances for the tests. NOTE ISO 10791-6, which deals with the accuracy of feeds, speeds and interpolations, also includes as test K4 a circular test. Here, the purpose is to check the mutual behaviour of two linear axes (generally X and Y) at two defined feed rates for one defined diameter. This is more or less a diagnostic test with respect to the circular interpolation, whereas the circular tests of this part of ISO 10791 give information on the overall contouring performance of the machine.

Test conditions for machining centres - Evaluation of contouring performance in the three coordinate planes