25.040.20 数控机床 标准查询与下载

T/CMTBA 1004-2019 数控重型卧式车床 加工和装配工艺故障分析与评价

本标准规定了数控重型卧式车床在进行加工和装配工艺可靠性评价时的故障分析与评价方法。 本标准适用于数控重型卧式车床（以下简称机床），其他重型机床可参照使用。

CNC heavy-duty horizontal lathe—Analysis and evaluation for machining and assembly process failure

T/CMTBA 1003-2019 数控重型龙门镗铣床 可靠性评估技术规范

本标准规定了数控重型龙门镗铣床可靠性评估的术语和定义、故障判定和计数原则、抽样、试验方式、试验要求、试验方法、数据采集等技术要求。 本标准适用于具有静压导轨的数控重型龙门镗铣床（以下简称机床）的可靠性评估。其他重型机床可参照使用。

CNC heavy-duty plano boring and milling machines—Technical specification for reliability evaluation

T/CMTBA 1005.1-2019 数控精密单柱立式车床 第1部分：精度检验

本部分规定了数控精密单柱立式车床的几何精度、工作精度、定位精度和重复定位精度检验的要求和方法以及相应的公差。 本部分适用于最大加工直径1000 mm～2500 mm的数控精密单柱立式车床。

CNC single column precision vertical lathe——Part 1:Testing of the accuracy

T/CMTBA 1005.2-2019 数控精密单柱立式车床 第2部分：技术条件

本部分规定了数控精密单柱立式车床的设计、制造和验收的要求。 本部分适用于最大加工直径1000 mm～2500 mm的数控精密单柱立式车床。

CNC single column precision vertical lathe—Part2:Specifications

T/CAMS 28.2-2019 数控车轴车床 第2部分：技术条件

本部分规定了数控车轴车床的制造和验收的要求。

CNC railway axle lathes—Part 2：Specification

KS D ISO 17296-4:2019 添加剂制造 - 一般原则 - 第4部分:数据处理概述

Additive manufacturing — General principles — Part 4: Overview of data processing

KS D ISO ASTM 52921-2019 添加剂制造的标准术语.坐标系和试验方法

Standard Terminology for Additive Manufacturing — Coordinate Systems and Test Methodologies

KS D ISO ASTM 52921:2019 添加剂制造的标准术语.坐标系和试验方法

Standard Terminology for Additive Manufacturing — Coordinate Systems and Test Methodologies

T/CAMS 28.1-2019 数控车轴车床 第1部分： 精度检验

本部分规定了数控车轴车床的几何精度、数控轴线定位精度和重复定位精度、工作精度的检验方法及相应的允差。

CNC railway axle lathes—Part 1:Testing of the accuracy

KS D ISO 17296-4-2019 添加剂制造 - 一般原则 - 第4部分:数据处理概述

Additive manufacturing — General principles — Part 4: Overview of data processing

KS B 4206-2019 用于机器数控的准备功能 G 和辅助功能 M 的编码

Coding of preparatory functions G and miscellaneousfunctions M for numerical control of machines

KS B 4002-2019 NC处理器输入-基本零件程序参考语言

NC Processor Input-Basic Part Program Reference Language

BS ISO 21919-1:2019 自动化系统和集成 自动化机器维护接口 概述和基本原理

What is ISO 21919-1 - Interfaces for automated machine tending about?    ISO 21919-1 describes interfaces for automated machine tending of at least one Computer Numerically Controlled (CNC) machine by using a machine tending device. These interfaces are the link between automated machine tending devices and machines used for production. The automated machine tending is initiated by either the machine tending system or by the machine.   ISO 21919-1 gives an overview and defines the fundamental principles on how the interfaces are set up. ISO 21919-1 defines the necessary vocabulary and sets the syntax for the structure of signals. ISO 21919-1 distinguishes between the safety interface, the control interface, and pro...

Automation systems and integration. Interfaces for automated machine tending - Overview and fundamental principles

T/ZZB 1388-2019 车钻复合数控机床

本标准规定了车钻复合数控机床的术语和定义、产品型号和参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存以及质量承诺。 本标准适用于车钻复合数控机床（以下简称机床）。

CNC machine for turning and boring

T/ZZB 1339-2019 高速精密立式数控铣床

本标准规定了工业用高速精密立式数控铣床的术语和定义、机床结构型式、基本要求、技术要求、试验方法、检验规则、标志、随机文件、包装、贮存和运输、质量承诺。 本标准适用于线性轴线行程至2 000 mm的高速精密立式数控铣床（以下简称为产品）。

High speed precision CNC vertical milling machine

ISO 21919-1:2019 自动化系统和集成.自动机器维护接口.第1部分:概述和基本原则

controlled (CNC) machine by using a machine tending device. These interfaces are the link between automated machine tending devices and machines used for production. The automated machine tending is initiated by either the machine tending system or by the machine. This document gives an overview and defines the fundamental principles on how the interfaces are set up. It defines the necessary vocabulary and sets the syntax for the structure of signals. It distinguishes between the safety interface, the control interface and project specific extensions. This document defines three conformance classes and dedicated conformance options. Classes and options consist of a number of signals to simultaneously: — allow a flexible adaptation of the interface(s) to a project-specific scope of functions; — tie sets of signals tight enough to avoid unnecessary coordination efforts between suppliers of the machine tending devices and machines. mechanical connections, it does not determine the transfer physics, a pin assignment, the hardware of the interfaces or measure of communication, e.g. protocol, and it is not intended to be used for communication to a MES (Manufacturing Execution System). NOTE ISO 21919-2 deals with the safety interface and control interface, allocating signals to a conformance class and/or conformance option, describing the detailed functions of each signal, describing and displaying the timing interactions between signals in flow charts and showing examples for safety matrices and safety-related functional relationships.

Automation systems and integration — Interfaces for automated machine tending — Part 1: Overview and fundamental principles

T/TZZL 3-2019 加工中心检验条件 三轴联动精加工试件精度检验

在GB/T 18400.7-2010  《 加工中心检验条件 第7部分 ：精加工试件精度检验》的基础上，制定了三轴联动加工试件检验方法，用来检验加工中心的三轴联动情况

Text conditions for machining center Accuracy test of three axis machining precision specimen

T/TZZL 4-2019 加工中心检验条件 重切削检验

在标准GB/T 9061-2006  《金属切削机床 通用技术条件》基础上，细化了重切削加工参数以及优化了检测方法。

Text conditions for machining center Heavy Cutting Test

T/ZZB 1284-2019 卧式加工中心

本标准规定了卧式加工中心的术语和定义、机床型式、基本要求、技术要求、试验方法、检验规则、标志、随机文件及附件、包装、运输和贮存、质量承诺。 本标准适用于线性轴线行程至2000 ㎜的卧式加工中心（以下简称“机床”）。

Horizontal machining centres

JB/T 13629-2019 数字化无模铸造精密成形机

Digital moldless casting precision forming machine