25.040.40 工业过程的测量和控制 标准查询与下载

ISO/CD 8000-118:2023 数据质量 第 118 部分：ISO 8000-115 在自然位置标识符中的应用

Data quality — Part 118: Application of ISO 8000-115 to natural location identifiers

ISO/DIS 8000-114:2023 数据质量 第 114 部分：主数据：ISO/IEC 21778 和 ISO 8000-115 在便携式数据中的应用

Data quality — Part 114: Master data: Application of ISO/IEC 21778 and ISO 8000-115 to portable data

ISO/TR 3151-1:2023 PLM-MES 界面的可视化元素 第 1 部分：概述

Visualization elements of PLM-MES interface — Part 1: Overview

NB/T 11229-2023 风力发电机组 光电编码器技术规范

Wind turbine photoelectric encoder technical specifications

IEC 60534-1:2023 RLV 工业过程控制阀.第1部分:控制阀术语和一般注意事项

Industrial-process control valves - Part 1: Control valve terminology and general considerations

IEC 60534-1:2023 工业过程控制阀.第1部分:控制阀术语和一般注意事项

Industrial-process control valves - Part 1: Control valve terminology and general considerations

EN IEC 61158-4-24:2023 工业通信网络 现场总线规范 第4-24部分：数据链路层协议规范 类型 24 元素

IEC 61158-4-24:2023 provides procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed datalink service provider; procedures for giving communications opportunities to all participating DL-entities (DLEs), sequentially and in a cyclic manner for deterministic and synchronized transfer at cyclic intervals up to 64 ms; procedures for giving communication opportunities available for time-critical data transmission together with non-time-critical data transmission without prejudice to the time-critical data transmission; procedures for giving cyclic and acyclic communication opportunities for time-critical data transmission with prioritized access; procedures for giving communication opportunities based on ISO/IEC/IEEE 8802‑3 medium access control, with provisions for nodes to be added or removed during normal operation; the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this document, and their representation as physical interface data units.

Industrial communication networks - Fieldbus specifications - Part 4-24: Data-link layer protocol specification - Type 24 elements

EN IEC 61158-4-21:2023 工业通信网络 现场总线规范 第4-21部分：数据链路层协议规范 类型 21 元素

IEC 61158-4-21:2023 describes: procedures for the timely transfer of data and control information from one data link user entity to a peer user entity, and among the data link entities forming the distributed data link service provider; procedures for giving communication opportunities based on ISO/IEC/IEEE 8802‑3 MAC, with provisions for nodes to be added or removed during normal operation; structure of the fieldbus data link protocol data units (DLPDUs) used for the transfer of data and control information by the protocol of this document, and their representation as physical interface data units.

Industrial communication networks - Fieldbus specifications - Part 4-21: Data-link layer protocol specification - Type 21 elements

EN IEC 61158-5-10:2023 工业通信网络 现场总线规范 第5-10部分：应用层服务定义 类型 10 元素

IEC 61158-5-10:2023 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 10 fieldbus. The term "time-critical" is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life.

Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 elements

EN IEC 61158-5-2:2023 工业通信网络 现场总线规范 第5-2部分：应用层服务定义 类型 2 元素

IEC 61158-5-2:2023 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 2 fieldbus. The term "time-critical" is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life.

Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements

EN IEC 61158-5-4:2023 工业通信网络 现场总线规范 第5-4部分：应用层服务定义 类型 4 元素

IEC 61158-5-4:2023 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 4 fieldbus. The term "time-critical" is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life.

Industrial communication networks - Fieldbus specifications - Part 5-4: Application layer service definition - Type 4 elements

23/30452616 DC BS ISO 8000-114 数据质量 第 114 部分 主数据 ISO/IEC 21778 和 ISO 8000-115 在便携式数据中的应用

BS ISO 8000-114. Data quality - Part 114. Master data. Application of ISO/IEC 21778 and ISO 8000- 115 to portable data

EN IEC 61158-6-10:2023 工业通信网络 现场总线规范 第6-10部分：应用层协议规范 类型 10 元素

IEC 61158-6-10:2023 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 10 fieldbus. The term “time-critical” is used to represent the presence of a time window, within which one or more specified actions are required to be completed with a defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life.

Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements

EN IEC 61158-6-4:2023 工业通信网络 现场总线规范 第6-4部分：应用层协议规范 类型 4 元素

IEC 61158-6-4:2023 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 4 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life.

Industrial communication networks - Fieldbus specifications - Part 6-4: Application layer protocol specification - Type 4 elements

EN IEC 61158-6-2:2023 工业通信网络 现场总线规范 第6-2部分：应用层协议规范 类型 2 元素

IEC 61158-6-2:2023 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 2 fieldbus. The term "time-critical" is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life.

Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2 elements

EN IEC 61158-6-23:2023 工业通信网络 现场总线规范 第6-23部分：应用层协议规范 类型 23 元素

IEC 61158-6-23:2023 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 23 fieldbus. The term "time-critical" is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life.

Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23 elements

EN IEC 61158-6-24:2023 工业通信网络 现场总线规范 第6-24部分：应用层协议规范 类型 24 元素

IEC 61158-6-24:2023 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 24 fieldbus. The term "time-critical" is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life.

Industrial communication networks - Fieldbus specifications - Part 6-24: Application layer protocol specification - Type 24 elements

GSO IEC 62832-1:2023 工业过程测量、控制和自动化 数字工厂框架 第1部分：一般原则

IEC 62832-1:2020 defines the general principles of the Digital Factory framework (DF framework), which is a set of model elements (DF reference model) and rules for modelling production systems. This DF framework defines: • a model of production system assets; • a model of relationships between different production system assets; • the flow of information about production system assets. The DF framework does not cover representation of building construction, input resources (such as raw production material, assembly parts), consumables, work pieces in process, nor end products. It applies to the three types of production processes (continuous control, batch control, and discrete control) in any industrial sector (for example aeronautic industries, automotive, chemicals, wood).

Industrial-process measurement, control and automation - Digital factory framework - Part 1: General principles

BS ISO 10303-232:2002 工业自动化系统及集成 产品数据表示与交换 应用协议：技术数据封装核心信息与交换

Industrial automation systems and integration. Product data representation and exchange - Application protocol: Technical data packaging core information and exchange

BS ISO 10303-14:2005 工业自动化系统及集成 产品数据表示和交换 描述方法：EXPRESS-X 语言参考手册

1   Scope This part of ISO 10303 specifies a language for specifying relationships between data that is governed by EXPRESS schemas, and for specifying alternate views of data that is governed by EXPRESS schemas. The language is called EXPRESS-X. EXPRESS-X is a structural data mapping language. It consists of language elements that allow an unambiguous specification of a relationship between EXPRESS schemas. The following are within the scope of this part of ISO 10303: — mapping of data governed by one EXPRESS schema to data governed by another EXPRESS schema; — mapping of data governed by one version of an EXPRESS schema to data governed by another version of that EXPRESS schema, where the two schemas have different names; — specification of requirements for data translators for data sharing and data exchange applications; — specification of alternate views of data defined by an EXPRESS schema; — an alternate notation for application protocol mapping tables; — bi-directional mappings where mathematically possible;

Industrial automation systems and integration. Product data representation and exchange - Description methods: The EXPRESS-X language reference manual