25.040.40 工业过程的测量和控制 标准查询与下载

BS ISO 10303-232:2002 工业自动化系统及集成 产品数据表示与交换 应用协议：技术数据封装核心信息与交换

Industrial automation systems and integration. Product data representation and exchange - Application protocol: Technical data packaging core information and exchange

BS ISO 15531-44:2017 工业自动化系统及集成 工业制造管理数据 车间数据采集的信息建模

1   Scope This document addresses the modelling of the data collected from data acquisition systems at control level to be stored at the manufacturing management level and processed further at this level for any management purpose. The following are within the scope of this document: — quantitative or qualitative data collected from data acquisition systems at the control or management level to be stored at the management level and used later on to manage manufacturing ; — time stamping and time measurement provided from data acquisition systems for control and management data. The following are outside the scope of this document: — any data only related to remote and real time measurement and management; — product definition data as modelled in the ISO 10303 series; — catalogue and library data as modelled in ISO 13584 and ISO 15926; — control data that are only used at the control level as well as those that are not used for manufacturing management.

Industrial automation systems and integration. Industrial manufacturing management data - Information modelling for shop floor data acquisition

BS ISO 13584-32:2010 工业自动化系统及集成 零件库 实施资源：OntoML：产品本体标记语言

Industrial automation systems and integration. Parts library - Implementation resources: OntoML: Product ontology markup language

BS ISO 10303-14:2005 工业自动化系统及集成 产品数据表示和交换 描述方法：EXPRESS-X 语言参考手册

1   Scope This part of ISO 10303 specifies a language for specifying relationships between data that is governed by EXPRESS schemas, and for specifying alternate views of data that is governed by EXPRESS schemas. The language is called EXPRESS-X. EXPRESS-X is a structural data mapping language. It consists of language elements that allow an unambiguous specification of a relationship between EXPRESS schemas. The following are within the scope of this part of ISO 10303: — mapping of data governed by one EXPRESS schema to data governed by another EXPRESS schema; — mapping of data governed by one version of an EXPRESS schema to data governed by another version of that EXPRESS schema, where the two schemas have different names; — specification of requirements for data translators for data sharing and data exchange applications; — specification of alternate views of data defined by an EXPRESS schema; — an alternate notation for application protocol mapping tables; — bi-directional mappings where mathematically possible;

Industrial automation systems and integration. Product data representation and exchange - Description methods: The EXPRESS-X language reference manual

BS ISO 10303-34:2001 工业自动化系统及集成 产品数据表示和交换 一致性测试方法和框架 应用协议实现的抽象测试方法

1   Scope This part of ISO 10303 specifies the abstract test methods for conformance testing of an implementation of an ISO 10303 Application Protocol (AP). The scope is limited to the following implementation methods: — preprocessors that claim to generate 10303 schema instances represented as exchange structures as defined by ISO 10303‑21; — postprocessors that claim to accept and process 10303 schema instances represented as exchange structures as defined by ISO 10303‑21; — preprocessors that claim to generate 10303 schema instances and use the SDAI interface as defined in ISO 10303‑22 to populate an SDAI implementation with these schema instances; — postprocessors that claim to accept 10303 schema instances and use the SDAI interface as defined in ISO 10303‑22 to extract schema instances from an SDAI implementation. The following are within the scope of this part of ISO 10303: — the conformance assessment process undertaken to evaluate the conformity of an implementation of an ISO 10303 application protocol. The abstract test methods are independently applicable to implementation methods based on ISO 10303‑21 and ISO 10303‑22; ...

Industrial automation systems and integration. Product data representation and exchange - Conformance testing methodology and framework. Abstract test methods for application protocol implementations

EN IEC 61158-4-4:2023 工业通信网络 现场总线规范 第4-4部分：数据链路层协议规范 类型 4 元素

IEC 61158-4-4:2023 specifies - procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed data-link service provider; - the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this document, and their representation as physical interface data units.

Industrial communication networks - Fieldbus specifications - Part 4-4: Data-link layer protocol specification - Type 4 elements

EN IEC 61158-3-4:2023 工业通信网络 现场总线规范 第 3-4 部分：数据链路层服务定义 类型 4 元素

IEC 61158-3-4:2023 provides common elements for basic time-critical messaging communications between devices in an automation environment. The term "time-critical" is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This document defines in an abstract way the externally visible services provided by the Type 4 fieldbus data-link layer in terms of the primitive actions and events of the services; the parameters associated with each primitive action and event, and the form which they take; and the interrelationship between these actions and events, and their valid sequences. The purpose of this document is to define the services provided to the Type 4 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model; systems management at the boundary between the data-link layer and systems management of the fieldbus reference model.

Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements

EN IEC 61158-3-24:2023 工业通信网络 现场总线规范 第 3-24 部分：数据链路层服务定义 类型 24 元素

IEC 61158-3-24:2023 provides common elements for basic time-critical messaging communications between devices in an automation environment. The term "time-critical" is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time-window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This document defines in an abstract way the externally visible service provided by the Type 24 fieldbus data-link layer in terms of the primitive actions and events of the service; the interrelationship between these actions and events, and their valid sequences; the parameters associated with each primitive action and event, and the form which they take.

Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type 24 elements

EN IEC 61158-1:2023 工业通信网络 现场总线规范 第1部分：IEC 61158 和 IEC 61784 系列的概述和指南

IEC 61158-1:2023 specifies the generic concept of fieldbuses. This document also presents an overview and guidance for the IEC 61158 eries by: explaining the structure and content of the IEC 61158 series; relating the structure of the IEC 61158 series to the ISO/IEC 7498-1 OSI Basic Reference Model; showing the logical structure of the IEC 61784 series; showing how to use parts of the IEC 61158 series in combination with the IEC 61784 series; providing explanations of some aspects of the IEC 61158 series that are common to the type specific parts of the IEC 61158‑5 series including the application layer service description concepts and the generic fieldbus data types.

Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series

EN IEC 61158-5-24:2023 工业通信网络 现场总线规范 第 5-24 部分：应用层服务定义 类型 24 元素

IEC 61158-5-24:2023 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 24 fieldbus. The term "time-critical" is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life.

Industrial communication networks - Fieldbus specifications - Part 5-24: Application layer service definition - Type 24 elements

EN IEC 61158-5-23:2023 工业通信网络 现场总线规范 第 5-23 部分：应用层服务定义 类型 23 元素

IEC 61158-5-25:2023 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 23 fieldbus. The term "time-critical" is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life.

Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23 elements

EN IEC 61158-4-2:2023 工业通信网络 现场总线规范 第 4-2 部分：数据链路层协议规范 类型 2 元素

IEC 61158-4-2:2023 is one of a series produced to facilitate the interconnection of automation system components. It is related to other standards in the set as defined by the "three-layer" fieldbus reference model described in IEC 61158‑1. The data-link protocol provides the data-link service by making use of the services available from the physical layer. The primary aim of this document is to provide a set of rules for communication expressed in terms of the procedures to be carried out by peer data-link entities (DLEs) at the time of communication. These rules for communication are intended to provide a sound basis for development in order to serve a variety of purposes: - as a guide for implementers and designers; - for use in the testing and procurement of equipment; - as part of an agreement for the admittance of systems into the open systems environment; - as a refinement to the understanding of time-critical communications within OSI.

Industrial communication networks - Fieldbus specifications - Part 4-2: Data-link layer protocol specification - Type 2 elements

EN IEC 61158-3-2:2023 工业通信网络 现场总线规范 第 3-2 部分：数据链路层服务定义 类型 2 元素

IEC 61158-3-2:2023 is one of a series produced to facilitate the interconnection of automation system components. It is related to other standards in the set as defined by the "three-layer" fieldbus reference model described in IEC 61158‑1. Throughout the set of fieldbus standards, the term "service" refers to the abstract capability provided by one layer of the OSI Basic Reference Model to the layer immediately above. Thus, the data-link layer service defined in this document is a conceptual architectural service, independent of administrative and implementation divisions.

Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements

EN IEC 61158-2:2023 工业通信网络 现场总线规范 第2部分：物理层规范和服务定义

IEC 61158-2:2023 is one of a series produced to facilitate the interconnection of automation system components. It is related to other standards in the set as defined by the "three-layer" fieldbus reference model described in IEC 61158‑1.

Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition

ISO/PRF TR 3151-1 PLM-MES 界面的可视化元素 — 第 1 部分：概述

Visualization elements of PLM-MES interface — Part 1: Overview

ISO/CD 3151-2 PLM-MES 界面的可视化元素 - 第 2 部分：工厂行业中的 3D 错误反馈

Visualization elements of PLM-MES interface — Part 2: 3D error feedback in the plant industry

BS ISO 8000-61:2016 数据质量-数据质量管理 流程参考模型

1   Scope This part of ISO 8000 specifies the processes required for data quality management. Each process is defined by a purpose, outcomes and activities that are to be applied for the assurance of data quality. The following are within the scope of this part of ISO 8000: — fundamental principles of data quality management; — the structure of the data quality management process; — definitions of the lower level processes for data quality management; — the relationship between data quality management and data governance; — implementation requirements. The following is outside the scope of this part of ISO 8000: — detailed methods or procedures by which to achieve the outcomes of the defined processes. This part of ISO 8000 is applicable to managing the quality of digital data sets that include not only structured data stored in databases but also less structured data such as images, audio, video and electronic documents. This part of ISO 8000 can be used by an organization managing data quality at the organization level because, for ins...

Data quality - Data quality management. Process reference model

BS ISO 15531-1:2004 工业自动化系统及集成 工业制造管理数据 总体概述

1   Scope ISO 15531 specifies the characteristics for a representation of manufacturing management information over the entire industrial process . It provides the necessary mechanisms and definitions to enable manufacturing management data to be shared and exchanged within the factory, with other plants or companies. The standard is mainly focused on discrete manufacturing but not limited to it. It may also apply to any industrial processes that do not imply any contradiction or inconsistency with the basic principle of the standard. The following are within the scope of ISO 15531: — the representation of information needed to manage production and resources ; — the exchange and sharing of production information and resources information including storing, transferring, accessing and archiving. EXAMPLE Information on resources and system capability and capacity , monitoring, maintenance, constraints and control information. NOTE Maintenance constraints and relevant maintenance management data are taken into ac...

Industrial automation systems and integration. Industrial manufacturing management data - General overview

BS ISO 15531-43:2006 工业自动化系统及集成 工业制造管理数据 制造流程管理数据：流程监控和制造数据交换的数据模型

1   Scope This part of ISO 15531 provides a data model for flow management, and a related set of building blocks, from which are specified standardized data models and representations for the planning , scheduling , controlling and monitoring of material and informational flows . This is in contrast with ISO 15531‑42, which provides a time model only. Consequently this part of ISO 15531 provides a representation of data related to flow control and management in manufacturing , through the development of a conceptual flow model . The following are within the scope of this part of ISO 15531: — representation of data related to the management and control of manufacturing flows . NOTE — This information is usually provided within the main plant, and exchanged among the different machine tools, or production cells. The following are outside the scope of this part of ISO 15531: — modelling of information

Industrial automation systems and integration. Industrial manufacturing management data - Manufacturing flow management data: Data model for flow monitoring and manufacturing data exchange

BS ISO 18629-41:2006 工业自动化系统及集成 流程规范语言 定义扩展：活动扩展

1   Scope This part of ISO 18629 provides a specification of non- primitive concepts of the language , using a set of definitions written in the language of ISO 18629. These definitions provide an axiomatization of the semantics for terminology in this part of ISO 18629. The following is within the scope of this part of ISO 18629: — definitions of concepts specified using concepts of ISO 18629‑11 and ISO 18629‑12 that are independent of state and time relations, and related to classes of activity such as those listed in Clause 5. The following is outside the scope of this part of ISO 18629: — definitions of state and time-related concepts specified using concepts of ISO 18629‑11 and ISO 18629‑12.

Industrial automation systems and integration. Process specification language - Definitional extension: Activity extensions