25.040.40 工业过程的测量和控制 标准查询与下载
共找到 2891 条与 工业过程的测量和控制 相关的标准，共 193 页
Data quality — Part 65: Data quality management: Process measurement questionnaire
- ICS
- 25.040.40
- CCS
- 发布
- 2021-12-30
- 实施
本标准规定了铝合金构件焊接结构残余应力高能声束控制方法所用的换能器结构设计要求、消减处理操作方法、消减处理工艺参数、消减处理效果的评估方法等。 本标准适用于壁厚不小于1mm的铝合金构件焊接加工残余应力的消减和均匀化处理。
High energy sound beam control method for welding residual stress of aluminum alloy components
- ICS
- 25.040.40
- CCS
- C374
- 发布
- 2021-12-10
- 实施
- 2022-11-04
本标准规定了铝合金加工残余应力高能声束控制方法的换能器结构设计要求、原位控制操作方法、原位控制效果的评估方法等。 本标准适用于壁厚不小于1mm的铝合金构件铣削加工残余应力的消减和均匀化处理。
High-energy sound beam control method for residual stress in milling of aluminum alloy components
- ICS
- 25.040.40
- CCS
- C374
- 发布
- 2021-12-10
- 实施
- 2022-11-04
本标准规定了采用超声临界折射纵波原位检测铝合金构件铣削加工残余应力的方法要求。 本标准规定了加工后壁厚不小于1mm的铝合金产品铣削加工区残余应力的超声检测。
Ultrasonic non-destructive testing method for residual stress in milling of aluminum alloy components
- ICS
- 25.040.40
- CCS
- C374
- 发布
- 2021-12-10
- 实施
- 2022-11-04
本标准规定了采用超声临界折射纵波法检测铝合金构件焊接残余应力的方法要求。 本标准适用于壁厚不小于1mm铝合金产品焊缝及其热影响区残余应力的超声检测。
Ultrasonic nondestructive testing method for welding residual stress distribution of aluminum alloy components
- ICS
- 25.040.40
- CCS
- C374
- 发布
- 2021-12-10
- 实施
- 2022-11-04
This part of IEC 62443 establishes requirements for: • defining a system under consideration (SUC) for an industrial automation and control system (IACS); • partitioning the SUC into zones and conduits; • assessing risk for each zone and conduit; • establishing the target securit
Security for industrial automation and control systems - Part 3-2: Security risk assessment for system design (IEC 62443-3-2:2020); German version EN IEC 62443-3-2:2020
- ICS
- 25.040.40
- CCS
- 发布
- 2021-12-00
- 实施
- 2021-12-01
Industrial automation systems and integration — Product data representation and exchange — Part 243: Application protocol: For modelling and simulation information in a collaborative systems engineering context (MoSSEC)
- ICS
- 25.040.40
- CCS
- 发布
- 2021-12
- 实施
- 2021-12
Industrial automation systems and integration — Product data representation and exchange — Part 400: Reference schema for SysML mapping
- ICS
- 25.040.40
- CCS
- 发布
- 2021-12
- 实施
1 Scope This document specifies requirements for the exchange of messages that contain master data consisting of characteristic data. These requirements can be checked by computer. The messages are suitable for exchange between organizations and between systems. EXAMPLE 1 A supplier sends a message to a customer. The message contains characteristic data describing an item that the customer is considering buying. The following are within the scope of this document: — conformance of master data messages to a formal syntax; — semantic encoding of master data messages; — conformance of master data messages to data specifications; — requirements on access to the data dictionaries that enable decoding of master data messages. The following are outside the scope of this document: — master data that are not characteristic data; — data that are not in messages; — messages that do not exchange master data b...
Data quality - Master data: Exchange of characteristic data: Syntax, semantic encoding, and conformance to data specification
- ICS
- 25.040.40
- CCS
- 发布
- 2021-11-30
- 实施
- 2021-11-30
This document specifies requirements for the exchange of messages that contain master data consisting of characteristic data. These requirements can be checked by computer. The messages are suitable for exchange between organizations and between systems. EXAMPLE 1 A supplier sends a message to a customer. The message contains characteristic data describing an item that the customer is considering buying. The following are within the scope of this document: — conformance of master data messages to a formal syntax; — semantic encoding of master data messages; — conformance of master data messages to data specifications; — requirements on access to the data dictionaries that enable decoding of master data messages. The following are outside the scope of this document: — master data that are not characteristic data; — data that are not in messages; — messages that do not exchange master data between organizations or systems; EXAMPLE 2 A merchant sends a message to a credit card company. The message represents a credit charge transaction and does not exchange master data between the organizations. — recording the provenance of master data; EXAMPLE 3 ISO 8000-120 addresses the capture and exchange of data provenance information. — accuracy of master data; EXAMPLE 4 ISO 8000-130 addresses the representation and exchange of information about the accuracy of master data that consists of characteristic data. — exchange of data that are not master data; EXAMPLE 5 ISO 8000-140 addresses the representation and exchange of information about the completeness of master data that consists of characteristic data. — management of master data internally within an organization; EXAMPLE 6 Data within an organization's enterprise resource planning or product data management system is out of scope. EXAMPLE 7 Making backup copies of data files containing master data is out of scope. — quality of data dictionaries; — a specific formal syntax for the exchange of master data. EXAMPLE 8 The ISO 9735 series, the ISO 13584 series, the ISO 15926 series and the ISO 22745 series specify formats that enable exchange of master data. The requirements in this document are considered necessary but not sufficient to achieve data quality with respect to exchange of master data. Issues such as the accuracy and provenance of master data also need to be addressed as part of an overall data quality strategy.
Data quality — Part 110: Master data: Exchange of characteristic data: Syntax, semantic encoding, and conformance to data specification
- ICS
- 25.040.40
- CCS
- 发布
- 2021-11-15
- 实施
- 0000-00-00
Digital validation by effective use of simulation
- ICS
- 25.040.40
- CCS
- 发布
- 2021-11-05
- 实施
- 2021-11-05
Field device integration (FDI) -- Part 150-1: Profiles -- ISA100 WIRELESS (IEC 62769-150-1:2021)
- ICS
- 25.040.40
- CCS
- 发布
- 2021-11-05
- 实施
- 2021-11-05
Field Device Integration (FDI) -- Part 2: FDI Client (IEC 62769-2:2021)
- ICS
- 25.040.40
- CCS
- 发布
- 2021-11-05
- 实施
- 2021-11-05
Field Device Integration (FDI) -- Part 3: Server (IEC 62769-3:2021)
- ICS
- 25.040.40
- CCS
- 发布
- 2021-11-05
- 实施
- 2021-11-05
Field Device Integration (FDI) -- Part 1: Overview (IEC 62769-1:2021)
- ICS
- 25.040.40
- CCS
- 发布
- 2021-11-05
- 实施
- 2021-11-05
The Industry Foundation Classes, IFC, are an open international standard for Building Information Model (BIM) data that are exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. The standard i
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2018); English version EN ISO 16739-1:2020, only on CD-ROM
- ICS
- 25.040.40
- CCS
- 发布
- 2021-11-00
- 实施
Automation systems and integration – Digital twin framework for manufacturing – Part 1: Overview and general principles
- ICS
- 25.040.40
- CCS
- 发布
- 2021-10-29
- 实施
- 2021-10-29
Automation systems and integration. Digital twin framework for manufacturing. Overview and general principles
- ICS
- 25.040.40
- CCS
- 发布
- 2021-10-29
- 实施
- 2021-10-29
3 术语和定义 3.1 嵌入式一体化工控机 3.2 效率 3.3 满载 3.4 半载 3.5 轻载 4 技术要求 4.1 设计要求 4.2 外观和结构要求 4.3 功能和性能 4.4 存储功能 4.5 接口 4.6 可扩展功能要求 4.7 安全 4.8 电源适应能力 4.9 噪声 4.10 电磁兼容性 4.11 环境条件 4.12 外壳防护 4.13 可靠性 4.14 限用物质的限量要求 5 试验方法 5.1 试验环境条件 5.2 外观和结构检查 5.3 功能和性能检查 5.4 安全试验 5.5 电源适应能力试验 5.6 噪声试验 5.7 电磁兼容性试验 5.8 环境试验 5.9 外壳防护试验 5.10 可靠性试验 5.11 限制物质试验 6 检验规则 6.1 一般规定 6.2 检验分类 6.3 定型检验 6.4 逐批检验 6.5 周期检验 7 标志、包装、运输和贮存 7.1 标志 7.2 包装 7.3 运输 7.4 贮存 附 录 A
General specification for industrial computers
- ICS
- 25.040.40
- CCS
- C391
- 发布
- 2021-10-27
- 实施
- 2021-10-27
Automation systems and integration – Digital twin framework for manufacturing – Part 4: Information exchange
- ICS
- 25.040.40
- CCS
- 发布
- 2021-10-22
- 实施
- 2021-10-22
