25.060.20 分度和刀具/工件夹持装置 标准查询与下载

BS ISO 7388-3:2016 自动工具转换用7/24锥度工具柄.AD、AF、UD、UF、JD和JF型保持按钮

Tool shanks with 7/24 taper for automatic tool changers. Retention knobs of forms AD, AF, UD, UF, JD and JF

ISO 7388-3:2016 锥度为7/24的自动工具更换装置用工具手柄. 第3部分: AD, AF, UD, UF, JD以及JF型手柄用拉钉

Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF

GOST 25557-2016 机床锥. 基准尺寸

Mashine tools tapers. Basic dimensions

GSO ISO 10649-3:2015 带平行键和推片的切削轴 第3部分：自动换刀装置 7/24 锥度刀柄的尺寸和设置

  Scope is not provided for this standard

Cutter arbors with parallel key and tenon drive -- Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer

GSO ISO 10649-2:2015 带平行键和推片的切削轴 第2部分：使用带有法兰接触面的锥形接口的刀柄的尺寸和设置

  Scope is not provided for this standard

Cutter arbors with parallel key and tenon drive -- Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface

GSO ISO 3442-3:2015 机床 两片式卡爪自定心卡盘的尺寸和几何试验 第3部分：锯齿卡爪动力操作卡盘

  Scope is not provided for this standard

Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 3: Power-operated chucks with serrated jaws

GSO ISO 10649-4:2015 带平行键和推片的切削轴 第4部分：自动换刀装置 7/24 锥度刀柄的尺寸和设置

  Scope is not provided for this standard

Cutter arbors with parallel key and tenon drive -- Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer

KS B 3402-2015 虎钳

Vices

KS B 3402-2015(2020) 平口钳

Vices

GSO ISO 839-1:2015 7/24 度锥形铣削设备主轴 第1部分：尺寸和分类

This part of ISO 839 specifies the dimensions of milling machine arbors with 7/24 tapers in accordance with ISO 297. It also specifies the designation of these arbors. NOTE The accessories of these arbors (spacing collars, bearing collars and clamping nuts) are specified in ISO 839-2.

Milling machine arbors with 7/24 tapers -- Part 1: Dimensions and designation

GSO ISO 299:2015 机床工作台 T 形槽和配套螺钉

This International Standard specifies, in millimetres, the dimensions and spacing of T-slots for machine tool tables. It also specifies the metric dimensions of bolts to be used in these slots.

Machine tool tables -- T-slots and corresponding bolts

GSO ISO 5414-2:2015 带夹紧螺钉的立铣刀夹头（立铣刀刀柄） 用于带扁平圆柱柄的刀具 第2部分：夹头连接尺寸和分类

This part of ISO 5414 specifies the dimensions of tool chucks (end mill holders) with clamp screws for tools with flatted cylindrical shanks in accordance with ISO 3338-2. It also specifies the designations of these chucks. Two types of connection are defined: — chucks with 7/24 taper shanks in accordance with ISO 297 for manual changers and with ISO 7388-1 for automatic changers, for tool shanks with either single flat or a double flat for manual and automatic changers; NOTE 1 This part of ISO 5414 specifies the dimensions of tool chucks with 7/24 taper shanks No. 30 for automatic changers although these are not standardized. — chucks with Morse taper shanks in accordance with ISO 296 and ISO 5413 for tool shanks with a single flat only. NOTE 2 The dimensions of the driving system of the tool shanks are dealt with in ISO 5414-1.

Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools -- Part 2: Connecting dimensions of chucks and designation

GSO ISO 3936:2015 7/24内外锥度推舌异径衬套 -尺寸

This International Standard specifies the dimensions of reduction sleeves with tenon drive with external 7/24 taper Nos. 40, 45, 50 and 60 and internal 7/24 taper Nos. 30, 40, 45 and 50. 7/24 tapers are in accordance with ISO 297.

Reduction sleeves with tenon drive with external and internal 7/24 taper -- Dimensions

GSO ISO 5414-1:2015 带安装螺钉的工具卡盘（端座） 适用于带圆柱柄的刀具 第1部分：刀柄驱动系统的尺寸

This part of ISO 5414 lays down the dimensions of tool chucks (end mill holders) with clamp screws designed for driving flatted cylindrical shanks in accordance with ISO 3338-2 and specifies the clamp screws used. It also gives the maximum diameter of the chuck nose. This part of ISO 5414 defines two types of drive: — chucks with bores of d1 ≤ 20 mm intended for driving cylindrical shank tools with a single flat, these tools being provided with either a single or a double cutting part; — chucks with bores of d1 ≥ 25 mm intended for driving cylindrical shank tools with a double flat, these tools being provided with a single cutting part only. NOTE The connecting dimensions of the various types of chucks and the designation of tool chucks (end mill holders) with clamp screws are dealt with in ISO 5414-2.

Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools -- Part 1: Dimensions of the driving system of tool shanks

GSO ISO 10897:2015 用于制造1:10锥形刀柄的衬套

This International Standard specifies the dimensions, materials and manufacturing requirements, and designation of collets for tools with cylindrical shanks and their corresponding holders and nuts. For non-standardized clamping devices, such as clamping devices specified in drawings, these holders can be agreed upon between customer and supplier. Form A applies where a clamping range of h10 is sufficient. Form В can be used for any application without lateral cutting load.

Collets for tool holders with taper ratio 1:10 -- Collets, hoders,nuts

GSO ISO 3937-1:2015 锯驱动刀轴 第1部分：莫氏锥度尺寸

This part of ISO 3937 specifies the dimensions of cutter arbors with tenon drive and with Morse tapers. The interchangeability dimensions of the milling cutter bearing on the cutter arbor are in conformity with ISO 2780. The dimensions of the retaining screw used are specified in ISO 2780. Morse tapers are in conformance with ISO 296 and ISO 5413.

Cutter arbors with tenon drive -- Part 1: Dimensions of Morse taper

GSO ISO 4248:2015 定向获取 定义和术语

This International Standard defines the various types of jig bushes in common use and gives the nomenclature, in English, French and Russian, which is associated with these bushes. Annex A deals with locking devices; annex B gives the various terms in German, Hungarian, Italian and Dutch. NOTE - The equivalent terms in annex B (German, Hungarian, Italian and Dutch) are published under the responsibility of the member bodies for Germany (DIN), Hungary (MSZH), Italy (UNI) and Belgium (IBN). Only the terms given in the three official languages of ISO (English, French and Russian) may be considered as ISO terms.

Jig bushes -- Definitions and nomenclature

GSO ISO 839-2:2015 带 7/24 锥度的铣床心轴 第2部分：附件

This International Standard specifies the recommended manufacturing dimensions for milling machine accessories : spacing collars, bearing collars and clamping nuts. Milling machine arbors with 7/24 tapers are specified in ISO 839/1.

Milling machine arbors with 7/24 tapers -- Part 2: Accessories

GSO ISO 4207:2015 带莫氏柄和可拆卸导轨的镗孔

This International Standard specifies the dimensions of counterbores with Morse taper shanks and detachable pilots for general use. The illustration is diagrammatic only and is not intended to indicate details of design.

Counterbores with Morse taper shanks and detachable pilots

GSO ISO 3937-3:2015 锯驱动刀轴 第3部分：带法兰接触面的空心锥体的互连尺寸

This part of ISO 3937 specifies the dimensions of cutter arbors with tenon drive and with hollow taper interface with flange contact surface (HSK). It also specifies the dimensions of cutter arbors with tenon drive and enlarged contact surface of the cutters. The interchangeability dimensions of the milling cutter bearing on the cutter arbor are in conformity with ISO 2780. The dimensions of the retaining screw used are specified in ISO 2780. The hollow taper interface with flange contact surface is in conformance with ISO 12164-1.

Cutter arbors with tenon drive -- Part 3: Dimensions of hollow taper interface with flange contact surface