共找到 2190 条与 分度和刀具/工件夹持装置 相关的标准,共 146 页
This International Standard specifies the dimensions of reduction sleeves with external 7/24 taper (Nos. 30, 40, 45, 50 and 60) for tools with Morse taper shanks (Nos. 1 to 6). All these sleeves allow driving of tools having Morse taper shanks which have a tenon at the small end of the shank; some sleeves allow driving of tools having Morse taper shanks which have an axially tapped hole in the shank : — with the use of an incorporated screw for sleeves 30 x 1 — 40 x1 — 40 x2 — 45 x1 — 45x2 — 45 x3 — 50 x 2 — 50 x 3 — 50 x 4 — 60 x 3 — 60 x 4 — 60 x 5; — with the use of a draw bar for sleeves 30 x 1 — 30x2 — 40x1 — 40x2 — 40x3 — 45x1 — 45x2 — 45x3 — 45 x4 — 50x2 — 50x3 — 50 x4 — 50x5 — 60 x 3 — 60 x 4 — 60 x 5 — 60 x 6. Morse tapers conform to ISO 296 and 7/24 tapers are in accordance with ISO 297 and ISO 2583.
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
This International Standard specifies the dimensions of reduction sleeves with 7/24 external taper No. 30-40-45-50 and 60 and Morse internal taper No. 1 to 6 (Morse taper No. 4, 5 and 6 being either with positive drive, see Figure 2, or without positive drive, see Figure 1). These sleeves permit driving of tools with Morse taper shanks with tapped holes with the aid of an internal screw. The form of this screw and its fixation in the sleeve are left to the manufacturer's discretion. 7/24 tapers are in accordance with ISO 297. Morse tapers are in accordance with ISO 296 and ISO 5413.
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
This International Standard specifies the recommended manufacturing dimensions for milling machine accessories : spacing collars, bearing collars and clamping nuts. Milling machine arbors with 7/24 tapers are specified in ISO 839/1.
Milling machine arbors with 7/24 tapers -- Part 2: Accessories
La présente partie de l'ISO 12164 spécifie les dimensions des queues à cône creux (HSK) à utiliser sur des machines-outils (par exemple machines de tournage, machines de tournage-fraisage). Une gamme de dimensions de queues est spécifiée.
Hollow taper interface with flange contact surface - Part 3 : dimensions of shanks for stationary tools
Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF (ISO 7388-3:2013)
Machining centers — Dimensions of spindle noses
Positive drive of Morse tapers. Dimensions
Hollow taper interface with flange contact surface. Dimensions of shanks for stationary tools
Hollow taper interface with flange contact surface. Dimensions of receivers for stationary tools
7/24 Tapers for spindle noses and tool shanks
Machining centers — Tool shanks and retention knobs
La présente partie de l'ISO 26623 spécifie les dimensions des interfaces à cône polygonal avec face d'appui - queues à cône polygonal pour changement automatique et manuel d'outils à utiliser sur des machines-outils (par exemple machines de tournage, machines de perçage, machine de fraisage et les centre d'usinage ainsi que les rectifieuses). Une gamme de dimensions de queues est spécifiée.
Polygonal taper interface with flange contact surface - Part 1 : dimensions and designation of shanks
La présente partie de l'ISO 26623 spécifie les dimensions des interfaces à cône polygonal avec face d'appui - nez de broche polygonale pour changement automatique et manuel d'outils à utiliser sur des machines-outils (par exemple machines de tournage, machines de perçage, machine de fraisage et les centre d'usinage ainsi que les rectifieuses). Une gamme de dimensions de nez de broche est spécifiée.Le couple est transmis par blocage de forme (polygone).
Polygonal taper interface with flange contact surface - Part 2 : dimensions and designation of receivers
Machine tool tables — T-slots and corresponding bolts
This part of ISO 12164 specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks in accordance with ISO 12164-3 to be applied to machine tools (e.g. turning machines, turning-mill machines). A range of sizes is specified. This part of ISO 12164 specifies the receiver of type T. It is for automatic tool exchange and manual clamping, which is achieved via holes in both the receiver and the tool shank. The torque is transmitted via the tail end of the shank through keys as well as friction.
Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools
Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools
This part of ISO 26623 specifies dimensions for polygonal taper interfaces with flange contact surface, polygon-receivers for automatic and manual tool exchange to be applied on machine tools (e. g. turning machines, drilling machines, milling machines, and turn/milling centres as well as grinding machines). A range of receiver sizes is specified. The torque is transmitted by form lock (polygon).
Polygonal taper interface with flange contact surface - Part 2: Dimensions and designation of receivers
Polygonal taper interface with flange contact surface - Part 1: Dimensions and designation of shanks
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号