25.060.20 分度和刀具/工件夹持装置 标准查询与下载

WJ/T 1469-2014 钳座及其零、部件 气缸前盖

Clamp base and its parts and components cylinder front cover

WJ/Z 225-2014 高度、深度量规　型式和尺寸 游标式深度塞规 D0=3mm～50mm，L0=2mm～100mm

Height and depth gauge types and sizes Vernier depth plug gauge D0=3mm～50mm, L0=2mm～100mm

WJ/T 1449-2014 钳座及其零、部件 内滑块

Clamp base and its parts and components inner slider

WJ/Z 233-2014 高度、深度量规　型式和尺寸 高度量规 L0=1mm～50mm

Height and depth gauge types and dimensions Height gauge L0=1mm～50mm

WJ/Z 235-2014 高度、深度量规　型式和尺寸 高度量规 L0=6mm～315mm

Height and depth gauge types and dimensions Height gauge L0=6mm～315mm

WJ/T 1473-2014 钳座及其零、部件 活塞杆

Clamp base and its parts and components piston rod

WJ/T 1454-2014 钳座及其零、部件 偏心轮组合

Clamp base and its parts and components, eccentric wheel combination

WJ/T 1471-2014 钳座及其零、部件 活塞

Clamp base and its parts and components, piston

WJ/T 1472-2014 钳座及其零、部件 皮碗

Clamp base and its parts and components, cup

WJ/T 1442-2014 钳座及其零、部件 手动单向偏心夹紧钳座

Manual one-way eccentric clamping clamp base and its parts and components

WJ/T 1443-2014 钳座及其零、部件 手动双向偏心夹紧钳座

Clamp base and its parts and components Manual bidirectional eccentric clamping clamp base

WJ/T 1461-2014 钳座及其零、部件 右限位块

Clamp base and its parts and components, right limit block

WJ/Z 223-2014 高度、深度量规　型式和尺寸 单刻线深度塞规 D0=3mm～50mm，L0=2mm～85mm

Type and size of height and depth gauges Single-line depth plug gauge D0=3mm～50mm, L0=2mm～85mm

WJ/T 1475-2014 钳座及其零、部件 气动换向阀

Clamp seat and its parts and components pneumatic directional valve

WJ/Z 230-2014 高度、深度量规　型式和尺寸 长度量规 L0=3mm～500mm、D0=2mm～14mm,L0≤80mm、D0=2mm～14mm,L0＜80mm

Height, depth gauge type and size length gauge L0=3mm～500mm, D0=2mm～14mm, L0≤80mm, D0=2mm～14mm, L0<80mm

JB/T 11770.1-2014 高速精密数控回转工作台 第1部分:精度检验

JB/T 11770的本部分规定了高速精密数控回转工作台几何精度和数控回转轴线定位精度的检验要求及检验方法。 本部分适用于采用蜗杆副为分度元件的台面直径D≤800 mm、线速度v≥30 m/min的高速精密数控回转工作台（以下简称转台）。

High speed & precision CNC rotary table.Part 1: Testing of the accuracy

WJ/T 1467-2014 钳座及其零、部件 密封垫

Clamp base and its parts and components seals

DIN 6386-1:2014 车床卡盘.第1部分:手动卡盘的交货技术条件

Lathe chucks - Part 1: Technical conditions of delivery for hand operated lathe chucks

NF E62-514-3*NF ISO 10649-3:2014 带平面键和凸榫的刀杆.第3部分:带自动换刀装置用7/24锥拔的刀柄尺寸规格和命名

Cutter arbors with parallel key and tenon drive - Part 3 : dimensions and designation of tool holders with 7/24 taper for automatic tool changer

GOST ISO 5415-2014 带有7/24外部和莫尔斯内部锥度和合并螺丝的变径套. 尺寸

Reduction sleeves with 7/24 external and Morse internal taper with incorporated screw. Dimensions