25.060.20 分度和刀具/工件夹持装置 标准查询与下载

GOST ISO 5414-1-2014 变平直柄端铣刀用的带夹紧螺钉的夹持装置. 工具手柄驱动系统的连接尺寸

Holders with clamp screw for flatted parallel shank end mills. Connecting dimensions of the driving system of tool shanks

GOST 32832.4-2014 不适用于自动换刀机床的带有7:24锥形套式铣刀的杆. 第4部分. 尺寸和符号

Arbors with 7:24 taper for shell cutters without automatic tool changers. Part 4. Dimensions and symbol

GOST 32832.2-2014 套式铣刀用带有空心锥柄HSK的杆. 第2部分. 尺寸和符号

Arbors with hollow taper shank HSK for shell cutters. Part 2. Dimensions and symbol

GOST ISO 5414-2-2014 带有7:24锥柄和莫氏锥柄以及扁平的夹紧螺钉的夹持装置. 直柄端铣刀. 连接尺寸和名称

Holders with 7:24 taper shank and with Morse taper shank with clamp screw for flatted parallel shank end mills. Part 2. Connecting dimensions and designation

GOST 32832.3-2014 自动换刀机床用带有7:24锥形套式铣刀的杆. 第3部分. 尺寸和符号

Arbors with 7:24 taper for shell cutters for automatic tool changers. Part 3. Dimensions and symbol

GOST 25827-2014 用于不带有自动换刀装置和用于自动换到装置的刀柄锥度为7:24的工具柄. 型式A, AD, AF, U, UD, UF, J, JD和JF. 尺寸和符号

Tool shanks with a 7:24 taper of shank for without automatic and for automatic tool changers. Forms A, AD, AF, U, UD, UF, J, JD and JF. Dimensions and symbol

GOST 32832.1-2014 套式铣刀用带有纵向键和榫传动的杆. 第1部分. 基准尺寸

Arbors with longitudinal key and tenon drive for shell cutters. Part 1. Basic dimensions

GOST ISO 5415-2014 带有7/24外部和莫尔斯内部锥度和合并螺丝的变径套. 尺寸

Reduction sleeves with 7/24 external and Morse internal taper with incorporated screw. Dimensions

JB/T 11561-2013 数控等分转台

本标准规定了数控等分转台(以下简称转台)的精度检验、技术要求、检验、标志、包装和随行文件。本标准适用于以端齿盘为分度元件的、工作台面直径或宽度不大于1 000 mm的转台。

NC indexing tabie

JB/T 11559-2013 数控机床自动过滤装置

本标准规定了数控机床自动过滤装置的型式和参数、要求和试验方法、标记、检验、标志、包装和随行文件。本标准适用于以滤纸、滤布等为过滤材料的数控机床自动过滤装置(简称过滤装置)。

CNC automatic filtration device

JB/T 9940.2-2013 工具柄自锁圆锥变径套 第2部分:技术条件

JB/T 9940的本部分规定了工具柄自锁圆锥变径套的精度、技术要求、检验规则、包装、标志和随行文件。本部分适用于机床用的工具柄自锁圆锥变径套 (以苄简称变径套)。

Self holding tapers reduction sleeve for tool shpers.Part 2: Technical specifications

JB/T 11560-2013 数控机床自动排屑装置

本标准规定了数控机床自动排屑装置的型式和参数、要求和试验方法、标记、检验、标志、包装和随行文件。本标准适用于以输送链条为传动的数控机床自动排屑装置(简称排屑装置)。

CNC automatic chip conveyor

JB/T 9939-2013 丝锥夹头

本标准规定了丝锥夹头的型式和参数、要求、切削试验、标记、检验、标志、包装和随行文件。本标准适用于具有安全过载保护机构的机用丝锥夹头。

Tap chuck

GSO ISO 7388-2:2013 用于自动刀具交换装置的 7/24 锥度刀柄 第2部分：J、JD 和 JF 刀柄的尺寸和术语

This part of ISO 7388 specifies the dimensions of tool shanks with a 7/24 taper of shank form J (with two possible additions for each) for automatic tool changers used on machines having an automatic gripping system for feeding tools from the magazine to the spindle and vice-versa. These tools are designed with the most important dimensions for use in spindle noses according to ISO 9270.

Tool shanks with 7/24 taper for automatic tool changers -- Part 2: Dimensions and designation of shanks of forms J, JD and JF

GSO ISO 7388-3:2013 自动换刀装置用 7/24 锥度刀柄 第3部分：AC、AD、AF、UC、UD、UF、JD 和 JF 型刀柄固定旋钮

This part of ISO 7388 specifies the dimensions of retention knobs for tool shanks with a 7/24 taper of shank forms A, AD, AF, UC, UD, UF, JD, and JF for automatic tool changers used on machines having an automatic gripping system for feeding tools from the magazine to the spindle and vice-versa. These tools are designed with the most important dimensions for use in spindle noses according to ISO 9270.

Tool shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF

GSO ISO 1080:2013 机床 用于锥柱的莫里斯装置 带锥度键孔的楔块

This International Standard specifies a dimensioning system, with numerical values of the dimensions in millimetres and inches, for cotter slots with 5 % taper keys for Morse tapers, outside and inside, and for reduction sleeves, intended for fixing tools on machine tools.

Machine tools -- Morse taper shanks -- Cotter slots with taper keys

GSO ISO 15488:2013 用于轴工具的 8 度角位置的衬套 衬套、螺母和连接器的尺寸

This International Standard specifies the dimensions, materials and manufacturing requirements, and designation of collets (of form A or of form B) for tools with cylindrical shanks and their corresponding holders and nuts. For non-standardized clamping devices, such as clamping devices specified in drawings, these holders can be agreed upon between customer and supplier. Form A applies to milling and any other application where a hard collet bore is required, provided that the clamping range of h10 be sufficient. Form B applies for general purposes where an extended clamping range is required.

Collets with 8 degree setting angle for tool shanks -- Collets, nuts and fitting dimensions

JB/T 3853-2013 等分分度头

本标准规定了等分分度头的型式和参数、精度检验、要求、标记、检验、标志、包装和随行文件。本标准适用于以槽盘为分度元件的等分分度头(以下简称分度头)。

Direct dividing head

GSO ISO 297:2013 / 24 手动更换刀柄锥度

This International Standard specifies the dimensions, in millimetres1), of 7/24 tapers for spindle noses and tool shanks and equipment for manual changing. It also specifies the external diameters of the collars for these tool shanks and equipment, and the positioning of the front face of the collar with respect to the taper in the case of attachment by the front face. NOTES 1 The collars have two seatings on the periphery into which the two driving tenons on the machine spindle are fitted and are intended for the transmission of the spindle rotational movement to the tool or equipment. 2 Shank attachment can be carried out either by conventional rear clamping, using a clamping fastener screwed on the rear side of the shank, or by front clamping of the collar using a locking device mounted on the machine spindle and applying the tool or equipment on to the spindle. Only in the latter case is it necessary for the positioning of the front face of the collar with respect to the taper gauge plane having the basic diameter D1 to be accurately specified. This type of taper is designed for various types of machine tool spindle noses as well as for the corresponding tool shanks and equipment. The dimensions for tool shank tapers automatic changers are specified in ISO 7388-1.

7/24 tapers for tool shanks for manual changing

KS B 3402-2013 方口钳(圆筒形)

이 표준은 작업대에 부착하여 주로 손다듬질 및 조립 작업을 할 때 가공물을 무는 각통형과 원통형의 보통 바이스, 배관 공사용 관의 가공에 사용하는 파이프 바이스 및 부착 바이스에 대하여 규정한다.

Vices