25.060.20 分度和刀具/工件夹持装置 标准查询与下载

ISO 10649-3:2013 带平面键和凸榫的刀杆.第3部分:带自动换刀装置用7/24锥拔的刀柄尺寸规格和命名

This part of ISO 10649 specifies the dimensions of cutter arbors with parallel key and tenon drive with 7/24 tapers for automatic tool changer.

Cutter arbors with parallel key and tenon drive.Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer

DIN ISO 26622-2:2013 带球轨系统的模块锥形接口.第2部分:承受器的尺寸和标注(ISO 26622-2-2008)

Modular taper interface with ball track system - Part 2: Dimensions and designation of receivers (ISO 26622-2:2008)

GSO ISO 12164-4:2013 带法兰接触面的空心锥形接口 第4部分：固定工具接收器尺寸

This part of ISO 12164 specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks in accordance with ISO 12164-3 to be applied to machine tools (e.g. turning machines, turning-mill machines). A range of sizes is specified. This part of ISO 12164 specifies the receiver of type T. It is for automatic tool exchange and manual clamping, which is achieved via holes in both the receiver and the tool shank. The torque is transmitted via the tail end of the shank through keys as well as friction.

Hollow taper interface with flange contact surface -- Part 4: Dimensions of receivers for stationary tools

GSO ISO 7388-1:2013 自动刀具交换装置用 7/24 锥度刀柄 第1部分：A、AD、AF、U、UD 和 UF 形状刀柄的尺寸和命名

This part of ISO 7388 specifies the dimensions of tool shanks with a 7/24 taper, of shank forms A, AD, AF, U, UD and UF (with two possible additions for each), for automatic tool changers, used on machines having an automatic gripping system for feeding tools from the magazine to the spindle and vice-versa. These tools are designed with the most important dimensions for use in spindle noses according to ISO 9270.

Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF

DIN 6597:2013 可转位刀片用内外部旋转带中空锥柄的工具夹.名称

Tool holders for external and internal turning with hollow taper shank for indexable inserts - Designation

DIN 6598:2013 可转位刀片用内外部旋转带中空锥柄的工具夹.与尺寸相关的概述

Tool holders for external and internal turning with hollow taper shank for indexable inserts - General survey, Correlation of dimensions

DIN ISO 26622-1:2013 带球轨系统的模块锥形接口. 第1部分:柄的尺寸和标注 (ISO 26622-1-2008)

Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks (ISO 26622-1:2008)

KS B ISO 296:2013 机床.工具手柄自动夹紧拔销

이 표준은 공구에 약 1/25(4 %) 내지 1/20(5 %)의 테이퍼를 갖는 테이퍼 섕크

Machine tools－Self-holding tapers for tool shanks

KS B ISO 296-2013(2018) 机床 - 自我保持锥度刀柄

Machine tools－Self-holding tapers for tool shanks

GSO ISO 12164-1:2013 带法兰接触面的空心锥形接口 第1部分：柄 尺寸

This part of ISO 12164 specifies dimensions for hollow taper shanks with flange contact surface (HSK) to be applied to machine tools (e. g. turning machines, drilling machines, milling machines and grinding machines). A range of shank sizes is specified. This part of ISO 12164 specifies two styles of shanks. Style A incorporates a grooved flange to enable automatic tool exchange. The tools may also be exchanged manually. Style C has no groove in its flange and can only be manually exchanged. Provision is made for manual clamping of both styles via a hole in the shank taper. The torque is transmitted at the tail end of the shank through keys as well as friction

Hollow taper interface with flange contact surface -- Part 1: Shanks -- Dimensions

GSO ISO 12164-2:2013 带法兰接触面的空心锥形接口 第2部分：接收器 尺寸

This part of ISO 12164 specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks in accordance with ISO 12164-1 to be applied on machine tools (e.g. turning machines, drilling machines, milling machines and grinding machines). A range of sizes is specified. This part of ISO 12164 specifies two styles of receiver. Style A is for automatic tool exchange and style C is for manual clamping which is achieved via holes in both the receiver and the tool shank. Torque is transmitted via the tail end of the shank through keys as well as friction.

Hollow taper interface with flange contact surface -- Part 2: Receivers -- Dimensions

GSO ISO 702-1:2013 机床前主轴连接尺寸和工件夹紧（车床）条件 第1部分：锥形连接

This part of ISO 702 specifies the sizes for interchangeability of conical spindle noses and corresponding connecting faces of face plates or work holding chucks

Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 1: Conical connection

GSO ISO 702-4:2013 机床 主轴头和工件卡盘的连接尺寸 第4部分：圆柱连接

This part of ISO 702 specifies the sizes for interchangeability of cylindrical spindle noses and corresponding connecting faces of face plates or work holding chucks

Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 4: Cylindrical connection

GSO ISO 12164-3:2013 带法兰接触面的空心锥度接口 第3部分：固定式刀具柄部尺寸

This part of ISO 12164 specifies dimensions for hollow taper shanks with flange contact surface (HSK) to be applied to machine tools (e.g. turning machines, turning-mill machines). A range of shank sizes is specified. This part of ISO 12164 specifies the shank of type T. It incorporates a grooved flange to enable automatic tool exchange. The tools may also be exchanged manually via a hole in the shank taper. The torque is transmitted at the tail end of the shank through keys as well as friction

Hollow taper interface with flange contact surface -- Part 3: Dimensions of shanks for stationary tools

GSO ISO 702-3:2013 机床 主轴头与工件卡盘的连接尺寸 第3部分：卡口式

This part of ISO 702 specifies the sizes for interchangeability of bayonet-type lathe spindle noses and corresponding face plates

Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 3: Bayonet type

DIN 79:2013 操作轴和部件用四方头

Squares for operating spindles and operating elements

GOST R ISO 12164-1-2013 空心锥柄(HSK)工具. A类和C类. 基准尺寸

Hollow taper shank of tools (HSK). Types A and C. Basic dimensions

GOST R ISO 12164-2-2013 A类和C类空心锥柄用工具接收器. 连接尺寸

Tool receiver for type A and C hollow taper shanks. Connecting dimensions

DIN 69063-5:2012 机床.锥形空心柄夹具.第5部分:符合DIN 69893-5标准的F型夹具.连接尺寸

Machine tools - Tool receiver for hollow taper shanks - Part 5: For type E according to DIN 69893-5; Connecting dimensions

DIN 69893-5:2012 带平端面的锥形空心柄.第5部分:E型锥形空心柄.尺寸规格和设计

Hollow taper shanks with flat contact surface - Part 5: Hollow taper shanks type E; Dimensions and design