25.060.20 分度和刀具/工件夹持装置 标准查询与下载

KS B ISO 7388-2-2010 自动换刀器用7/24锥度刀柄第2部分:J、JD和JF型刀柄的尺寸和名称

Tool shanks with 7/24 taper for automatic tool changers－Part 2：Dimensions and designation of shanks of forms J, JD and JF

ISO 10649-4:2010 带平面键和凸榫的刀杆.第4部分:带7/24锥拔无自动换刀装置刀柄的尺寸规格和命名

This part of ISO 10649 specifies the dimensions of cutter arbors with parallel key and tenon drive with 7/24 tapers without automatic tool changers.

Cutter arbors with parallel key and tenon drive - Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers

ISO 10649-3:2010 带平面键和凸榫的刀杆.第3部分:带自动换刀装置用7/24锥拔的刀柄尺寸规格和命名

This part of ISO 10649 specifies the dimensions of cutter arbors with parallel key and tenon drive with 7/24 tapers for automatic tool changer.

Cutter arbors with parallel key and tenon drive - Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers

DIN 6353:2010 无通孔动力操作车床卡盘.十字榫式颚支架.

Lathe chucks, power-operated, without trough-hole - Cross tenon type jaw mounting

DIN ISO 3442-1:2010 机床.带二件式爪的自定心卡盘的尺寸规格和几何学试验.第1部分:带企口缝型爪的人工操作的卡盘(ISO 3442-1-2005)

Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 1: Manually operated chucks with tongue and groove type jaws (ISO 3442-1:2005)

DIN ISO 3442-3:2010 机床.带二件式爪的自定心卡盘的尺寸规格和几何学试验.第1部分:带锯齿状爪的电动卡盘(ISO 3442-3-2007)

Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3: Power-operated chucks with serrated jaws (ISO 3442-3:2007)

ISO 10649-1:2010 带平面键和凸榫的刀杆.第1部分:一般尺寸规格

This part of ISO 10649 specifies the dimensions of tool interface for cutter arbors with parallel key and tenon drive.

Mandrins porte-fraise à entra?nement par clavette et tenon - Partie 1: Dimensions générales (deuxième édition)

ISO 10649-2:2010 带平面键和凸榫的刀杆.第2部分:带有法兰接触面的开心锥拔接口刀柄的尺寸规格和命名

This part of ISO 10649 specifies the dimensions of cutter arbors with parallel key and tenon drive with hollow taper interface (HSK) with flange contact surface.

Cutter arbors with parallel key and tenon drive - Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface

ISO 9270-1:2010 锥度为7/24的自动换刀装置用工具手柄.第1部分:S和SF形式轴头主轴端的尺寸规格和设计

7/24 taper spindle noses for automatic tool changers - Part 1: Dimensions and designation of spindle noses of forms S and SF

DIN ISO 3442-2:2010 机床.带二件式爪的自定心卡盘的尺寸规格和几何学试验.第1部分:带企口缝型爪的电动卡盘(ISO 3442-2-2005)

Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2: Power-operated chucks with tongue and groove type jaws (ISO 3442-2:2005)

ISO 9270-2:2010 锥度为7/24的自动换刀装置用工具手柄.第2部分:J和JF形式的轴头主轴端的尺寸规格和设计

7/24 taper spindle noses for automatic tool changers - Part 2: Dimensions and designation of spindle noses of forms J and JF

DIN 6350-1:2010 手动中心夹件的车床夹盘.第1部分:圆柱形安装凹槽

Lathe chucks, hand-operated - Centric clamp - Part 1: Cylindrical mounting recess

DIN 6350-2:2010 手动车床卡盘的中心夹件.第2部分:带1:4锥度安装凹座

Lathe chucks, hand-operated - Centric clamp - Part 2: Mounting recess with 1:4 taper

DIN 6351-1:2010 手动车床卡盘.带中心夹合自调整的钳口.第1部分:圆柱形安装槽

Lathe chucks, hand-operated - Jaws with centrical clamping individually adjustable - Part 1: Cylindrical mounting recess

DIN 6351-2:2010 手动车床卡盘 非自定心卡盘 第2部分 带1 4锥度安装槽

Lathe chucks, hand-operated - Jaws with centrical clamping individually adjustable - Part 2: Mounting recess with 1:4 taper

DIN ISO 702-4:2010 机床.主轴端部和工件夹盘的连接尺寸.第4部分:圆柱形连接

This part of DIN ISO 702 specifies the sizes for interchangeability of cylindrical spindle noses and corresponding connecting faces of face plates or work holding chucks. The conical connection, "Camlock" and"bayonet" types are delt with DIN ISO 702-1, DIN ISO 702-2 and DIN ISO 702-3, respectively.

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 4: Cylindrical connection (ISO 702-4:2004)

DIN ISO 702-3:2010 机床.主轴端部和工件夹盘的连接尺寸.第3部分:卡口型

This standard specifies the sizes for interchangeability of bayonet-type lathe spindle noses and corresponding face plates. The types "A" conical and "Camlock" are dealt with in DIN ISO 702-1 and DIN ISO 702-2, respectively.

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 3: Bayonet type (ISO 702-3:2007)

DIN ISO 702-2:2010 机床.主轴端部和工件夹盘的连接尺寸.第2部分:凸轮锁紧型

This standard specifies the sizes for interchangeability of Camlock-type lathe spindle noses and corresponding face plates. The types "A" conical and "bayonet" are dealt with in parts 1 and 3 respectively.

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 2: Camlock type (ISO 702-2:2007)

DIN ISO 702-1:2010 机床.主轴端部和工件夹盘的连接尺寸.第1部分:圆锥连接

Dieser Teil von ISO 702 legt die Maáe for die Austauschbarkeit von kegelf”rmigen Spindelk”pfen auf Drehmaschinen und der entsprechenden Anlagefl?chen von Aufnahmeplatten oder Drehfuttern fest. * Inhaltsverzeichnis

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection (ISO 702-1:2009)

DS/ISO 7388-1:2010 自动换刀器用 7/24 锥度刀柄 第1部分：A、AD、AF、U、UD 和 UF 型刀柄的尺寸和名称

This part of ISO 7388 specifies the dimensions of tool shanks with a 7/24 taper, of shank forms A, AD, AF, U, UD and UF (with two possible additions for each), for automatic tool changers, used on machines having an automatic gripping system for feeding tools from the magazine to the spindle and vice-versa. These tools are designed with the most important dimensions for use in spindle noses according to ISO 9270.

Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF