25.060.20 分度和刀具/工件夹持装置 标准查询与下载

DS/ISO 7388-2:2010 自动换刀器用 7/24 锥度刀柄 第2部分：J、JD 和 JF 型刀柄的尺寸和名称

This part of ISO 7388 specifies the dimensions of tool shanks with a 7/24 taper of shank form J (with twopossible additions for each) for automatic tool changers used on machines having an automatic grippingsystem for feeding tools from the magazine to the spindle and vice-versa. These tools are designed with the most important dimensions for use in spindle noses according to ISO 9270.

Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF

NF E62-528:2010 带柄舌莫氏锥形刀柄的刀具用7/24外锥度的变径套

Reduction sleeves with external 7/24 taper for tools with tanged morse taper shanks.

KS B ISO 3442-2009 二片式机床用自定心卡盘（舌槽式） 互换性尺寸及验收试验规范

Self-centring chucks for machine tools with two-piece jaws(tongue and groove type)－Sizes for interchangeability and acceptance test specifications

KS B ISO 9401-2009 机床 动力卡盘上的卡爪安装件

Machine tools－Jaw mountings on power chucks

KS B ISO 702-3-2009 机床主轴头与工件夹头的连接尺寸第3部分:卡口式

Machine tools－Connecting dimensions of spindle noses and work holding chucks－Part 3：Bayonet type

KS B ISO 9401:2009 机床动力卡盘上的钳口装置

Machine tools－Jaw mountings on power chucks

KS B ISO 3442-1-2009 机床两件式爪自定心卡盘尺寸和几何试验第1部分:舌槽式爪手动卡盘

Machine tools－Dimensions and geometric tests for self-centring chucks with two-piece jaws－ Part 1：Manually operated chucks with tongue and groove type jaws

KS B ISO 3442-3-2009 机床两片爪自定心卡盘尺寸和几何试验第3部分:锯齿爪动力卡盘

Machine tools－Dimensions and geometric tests for self-centring chucks with two-piece jaws－Part 3：Power-operated chucks with serrated jaws

KS B ISO 3442:2009 机床2的自动定心卡盘安装兼容的尺寸和验收方法

Self-centring chucks for machine tools with two-piece jaws(tongue and groove type)-Sizes for interchangeability and acceptance test specifications

KS B ISO 3089-2009 机床.带整体式钳口的自动定心手动卡盘的试验条件

Machine tools－Test conditions for self-centring, manually-operated chucks with one-piece jaws

KS B ISO 3442-2-2009 机床两片爪自定心卡盘的尺寸和几何试验第2部分:舌槽式动力卡盘

Machine tools－Dimensions and geometric tests for self-centring chucks with two-piece jaws－Part 2：Power-operated chucks with tongue and groove type jaws

DS/ISO 702-2/Corr. 1:2009 机床 主轴头和工件夹头的连接尺寸 第2部分：凸轮锁式

This International Standard specifies the sizes for interchangeability of cylindrical spindle noses andcorresponding connecting faces of face plates or work holding chucks.NOTE The ""Conical connection"", ""Bayonet type"" and ""Cylindrical connection"" are dealt with parts 1, 3 and 4 respectively.

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 2: Camlock type

DIN 10:2009 旋转工具用直柄角尺

Squares of parallel shanks for rotating tools

ISO 702-2:2007/cor 1:2009 机床.心轴鼻端和工作夹紧吸盘的连接尺寸.第2部分:凸轮锁扣式.勘误表1

Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 2: Camlock type TECHNICAL CORRIGENDUM 1

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 2: Camlock type; Technical Corrigendum 1

NF E62-109-1*NF ISO 702-1:2009 机床.主轴轴头和工作保持夹头的连接尺寸.第1部分:锥形连接

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1 : conical connection.

DS/ISO 702-1:2009 机床 主轴头和工件夹头的连接尺寸 第1部分：锥形连接

This part of ISO 702 specifies the sizes for interchangeability of conical spindle noses andcorresponding connecting faces of face plates or work holding chucks.NOTE The ""camlock type"", ""bayonet type"" and ""cylindrical connection"" are dealt with in ISO 702-2, ISO 702-3 and ISO 702-4, respectively.

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection

KS B 5230-2009(2019) 莫氏锥度规

Morse taper gauges

KS B 5230-2009 莫尔斯卷尺

이 표준은 각종 기계 부품의 모스 테이퍼부1)의 공작 및 검사에 사용하는 모스 테이퍼 게이

Morse taper gauges

BS ISO 3937-2:2009 榫传动的刀杆 7/24锥的尺寸规格

Cutter arbors with tenon drive. Dimensions of 7/24 taper

BS ISO 3937-3:2009 榫传动的刀杆 带法兰连接表面的空心锥形界面的尺寸规格

Cutter arbors with tenon drive. Dimensions of hollow taper interface with flange contact surface