25.060.20 分度和刀具/工件夹持装置 标准查询与下载

JIS B 6006-1:2008 机床.双爪自动定心卡盘的尺寸和几何试验.第1部分:舌槽型手动卡盘

この規格は，クロスキー形ッーピースジョー付自己求心手動チャック(以下，“チャック”という。)の互換寸法（互換性に関する寸法）及びJIS B 6191に基づき，静的精度検査及び適用する許容値について規定する。

Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 1: Manually operated chucks with tongue and groove type jaws

JIS B 6006-3:2008 机床.双爪自动定心卡盘的尺寸和几何试验.第3部分:锯齿型电动卡盘

この規格は，互換寸法(互換性に関する寸法)を確実にするために，パワーチャックのペースジョーに取り付けるトップジョーの900及び60.セレーション並びに適用可能なジョーナットについて規定する。さらに，JIS B 6191に基づき，ニつ以上のつめをもつセレーション形ッーピースジョー付自己求心パワーチャック（以下，“チャック行という。）の静的精度検査及び許容値についても規定する。

Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 3: Power-operated chucks with serrated jaws

JIS B 6152:2008 机床.单爪自动定心手动卡盘的试验条件

この規格は，JIS B 6191に基づき，ニつ以上のつめをもつ，工作機械用自己求心手動チャックの静的精度検査及び適用する許容値について規定する。

Machine tools -- Test conditions for self-centring, manually-operated chucks with one-piece jaws

JB/T 6350-2008 铣夹头

本标准规定了铣夹头的型式和参数、要求、检验方法、切削试验、产品标记、检验规则、标志和包装。 本标准适用于铣夹头。

Milling chuck

BS ISO 5415:2007 带 7/24 外锥度和莫氏内锥度以及内置螺钉的变径套筒

1   Scope This International Standard specifies the dimensions of reduction sleeves with 7/24 external taper No. 30-40-45-50 and 60 and Morse internal taper No. 1 to 6 (Morse taper No. 4, 5 and 6 being either with positive drive, see Figure 2, or without positive drive, see Figure 1). These sleeves permit driving of tools with Morse taper shanks with tapped holes with the aid of an internal screw. The form of this screw and its fixation in the sleeve are left to the manufacturer's discretion. 7/24 tapers are in accordance with ISO 297. Morse tapers are in accordance with ISO 296 and ISO 5413.

Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw

BS ISO 5415:2008 带7/24外锥度和莫氏内锥度的缩径套筒和连接螺钉

Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw

DS/ISO 702-2:2008 机床 主轴头和工件夹头的连接尺寸 第2部分：凸轮锁式

This International Standard specifies the sizes for interchangeability of cylindrical spindle noses andcorresponding connecting faces of face plates or work holding chucks.NOTE The ""Conical connection"", ""Bayonet type"" and ""Cylindrical connection"" are dealt with parts 1, 3 and 4 respectively.

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 2: Camlock type

DS/ISO 702-3:2008 机床 主轴头和工件夹头的连接尺寸 第3部分：卡口式

This International Standard specifies the sizes for interchangeability of bayonet-type lathe spindle noses and corresponding face plates.NOTE The types ""A"" and ""Camlock"" are dealt with in parts 1 and 2 respectively.

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 3: Bayonet type

BS ISO 702-3:2007 机床.主轴头和工件卡盘的连接尺寸规格.卡口型

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Bayonet type

BS ISO 702-2:2007 机床.主轴头和工件卡盘的连接尺寸规格.凸轮锁紧型

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Camlock type

KS B 4420-2007 数控立式车床性能及精度检验规程

Test code for performance and accuracy of numerically controlled vertical turning lathes

ISO 5415:2007 带7/24外锥度和莫氏内锥度的缩径套筒和连接螺钉

This International Standard specifies the dimensions of reduction sleeves with 7/24 external taper No. 30-40-45-50 and 60 and Morse internal taper No. 1 to 6 (Morse taper No. 4, 5 and 6 being either with positive drive, see Figure 2, or without positive drive, see Figure 1). These sleeves permit driving of tools with Morse taper shanks with tapped holes with the aid of an internal screw. The form of this screw and its fixation in the sleeve are left to the manufacturer's discretion. 7/24 tapers are in accordance with ISO 297. Morse tapers are in accordance with ISO 296 and ISO 5413.

Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw

NF E62-540-1*NF ISO 7388-1:2007 带7/24锥度的自动工具转换器用工具柄.A、AD、AF、UD和UF型柄的尺寸和设计

Tool shanks with 7/24 taper for automatic tool changers - Part 1 : dimensions and designation of shanks of forms A, AD, AF, U, UD and UF.

DS/ISO 702-4:2007 机床 主轴头和工件夹头的连接尺寸 第4部分：圆柱连接

ISO 702-4:2004 specifies the sizes for interchangeability of cylindrical spindle noses and corresponding connecting faces of face plates or work holding chucks.

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 4: Cylindrical connection

JB/T 6565-2007 万能镗头

本标准规定了万能镗头的参数、要求和试验方法、检验规则、标志、包装和随行文件。 本标准适用于万能镗头的制造与验收。

Universal boring head

JB/T 10794-2007 矩阵式超强永磁吸盘

本标准规定了机床用矩阵式超强永磁吸盘的基本型式、参数、技术要求、检验方法、标志、包装、运输与储存等要求。 本标准适用于机床用长度不大于 1200mm的矩阵式超强永磁吸盘。 本标准规定的参数适用于新设计的矩阵式超强永磁吸盘。

Matrix permanent magnetic super chuck

JB/T 3489-2007 快换夹头

本标准规定了快换夹头的型式与参数、要求和试验方法、性能试验、检验规则、标志及包装。 本标准适用于钻床、车床等机床使用的钻孔和攻丝快换夹头的加工与检验。

Quick change chucks

JB/T 6563-2007 管缆防护导套

本标准规定了管缆防护导套（以下简称导管套）的标记、结构型式、主要参数、技术要求、检验、标志、储运与包装。 本标准适用于 DGT 型导管套。

Shield conduit for pipes and cables

ISO 702-3:2007 机床.轴头和工件夹盘的连接尺寸.第3部分:卡口型

This part of ISO 702 specifies the sizes for interchangeability of bayonet-type lathe spindle noses and corresponding face plates. NOTE The “conical connection”, “camlock type” and “cylindrical connection” are dealt with in ISO 702-1, ISO 702-2 and ISO 702-4, respectively

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 3: Bayonet type

ISO 702-2:2007 机床.轴头和工件夹盘的连接尺寸.第2部分:凸轮锁紧型

This part of ISO 702 specifies the sizes for interchangeability of cylindrical spindle noses and corresponding connecting faces of face plates or work holding chucks. NOTE The “conical connection”, “bayonet type” and “cylindrical connection” are dealt with in ISO 702-1, ISO 702-3 and ISO 702-4, respectively.

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 2: Camlock type