共找到 170 条与 锯床 相关的标准,共 12 页
Safety of transportable motor-operated electric tools - Part 2-11 : particular requirements for combined mitre and bench saws.
1.1 This standard specifies the safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation, setting-up, maintenance, and repair) of machines whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal, by means of a saw blade. 1.2 This standard takes into account the intended use, reasonably foreseeable misuse, machine setting and blade fitting, maintenance and cleaning, and their effects on the safety of operators and other exposed persons. It presumes access to the machine from all directions at floor level and addresses both normal operation and unexpected or unintended starting. 1.3 This standard applies to the ancillary devices which form an integral part of the machine. Where such devices are not an integral part of the machine, the designer, manufacturer or supplier of the installation should take into account their intended use, and should make provision for the safe linking of such devices with the machine. 1.4 This standard applies to (metal) sawing machines which are manufactured after the date of publication by CEN of this standard.
Machine tools - Safety - Sawing machines for cold metal (includes Amendment A1:2009); English version of DIN EN 13898:2009-09
Machine tools - Safety - Sawing machines for cold metal
1.1 This standard specifies the safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation, setting-up, maintenance, and repair) of machines whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal, by means of a saw blade.1.2 This standard takes into account the intended use, reasonably foreseeable misuse, machine setting and blade fitting, maintenance and cleaning, and their effects on the safety of operators and other exposed persons. It presumes access to the machine from all directions at floor level and addresses both normal op
Machine tools - Safety - Sawing machines for cold metal
This standard specifies the safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation, setting-up, maintenance, and repair) of machines whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal, by means of a saw blade. This standard takes into account the intended use, reasonably foreseeable misuse, machine setting and blade fitting, maintenance and cleaning, and their effects on the safety of operators and other exposed persons. It presumes access to the machine from all directions at floor level and addresses both normal operation and unexpected or unintended starting. This standard applies to the ancillary devices which form an integral part of the machine. Where such devices are not an integral part of the machine, the designer, manufacturer or supplier of the installation should take into account their intended use, and should make provision for the safe linking of such devices with the machine. This standard applies to (metal) sawing machines which are manufactured after the date of publication by CEN of this standard.
Machine tools - Safety - Sawing machines for cold metal
Transportable motor-operated electric tools-Safety-Part 2-10:Particular requirements for cutting-off grinders
아래 사항들을 제외하고, 제1부의 본 조항이 적용된다.1.1 추가이 규격은 지름 4
Transportable motor-operated electric tools-Safety-Part 2-10:Particular requirements for cutting-off grinders
Transportable motor-operated electric tools-Safety-Part 2-10:Particular requirements for cutting-off grinders
This standard covers the safety requirements for the design, installation, care and use of single blade, nonadjustable cut angle jump saws and certain related accessory equipment, used in industrial and commercial applications, having a total connected power of 5 hp (3.7 KW) or greater, or having 3-phase wiring.
Safety Requirements for Fixed Angle Jump Saws
Safety of transportable motor-operated electric tools - Part 2 : particular requirements for band saws.
Safety of transportable motor-operated electric tools - Part 2-9 : particular requirements for mitre saws.
Safety of transportable motor-operated electric tools - Part 2-11 : particular requirements for combined mitre and bench saws.
Safety of transportable motor-operated electric tools - Part 2-1 : particular requirements for circular saw benches.
Parper cutting machine-Paper cutting knives
This clause of Part 1 is applicable except as follows: 1 Addition: This standard applies to transportable combined mitre and bench saws with a saw blade diameter not exceeding 315 mm and intended for cutting wood and analogue materials. 2 Addition: This standard does not apply to transportable mitre and bench saws used to cut steel, iron, brass or food. Single function bench saws are covered by EN 61029-2-1. Single function mitre saws are covered by EN 61029-2-9. Combined mitre and bench saws other than transportable are covered by EN 1870-3.
Safety of transportable motor-operated tools - Particular requirements for combined mitre and bench saws
1 This standard specifies the safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation, setting-up, maintenance, and repair) of machines whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal, by means of a saw blade. 2 This standard takes into account the intended use, reasonably foreseeable misuse, machine setting and blade fitting, maintenance and cleaning, and their effects on the safety of operators and other exposed persons. It presumes access to the machine from all directions at floor level and addresses both normal operation and unexpected or unintended starting. 3 This standard applies to the ancillary devices which form an integral part of the machine. Where such devices are not an integral part of the machine, the designer, manufacturer or supplier of the installation should take into account their intended use, and should make provision for the safe linking of such devices with the machine. 4 This standard applies to (metal) sawing machines which are manufactured after the date of publication by CEN of this standard.
Machine tools - Safety - Sawing machines for cold metal
1.1 This standard specifies the safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation, setting–up, maintenance, and repair) of machines whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal, by means of a saw blade. 1.2 This standard takes into account the intended use, reasonably foreseeable misuse, machine setting and blade fitting, maintenance and cleaning, and their effects on the safety of operators and other exposed persons. It presumes access to the machine from all directions at floor level and addresses both normal operation and unexpected or unintended starting. 1.3 This standard applies to the ancillary devices which form an integral part of the machine. Where such devices are not an integral part of the machine, the designer, manufacturer or supplier of the installation should take into account their intended use, and should make provision for the safe linking of such devices with the machine. 1.4 This standard applies to (metal) sawing machines which are manufactured after the date of publication by CEN of this standard.
Machine tools.Safety.Sawing machines for cold metal
This standard specifies the safety requirements and measures to be adopted by persons undertaking the design; construction and supply (including installation; setting-up; maintenance; and repair) of machines whose primary intended use is for sawing cold metal (ferrous and non-ferrous); or material partly of cold metal; by means of a saw blade.This standard takes into account the intended use; reasonably foreseeable misuse; machine setting and blade fitting; maintenance and cleaning; and their effects on the safety of operators and other exposed persons. It presumes access to the machine from all directions at floor level and addresses both normal operation and unexpected or unintended starting.This standard applies to the ancillary devices which form an integral part of the machine. Where such devices are not an integral part of the machine; the designer; manufacturer or supplier of the installation should take into account their intended use; and should make provision for the safe linking of such devices with the machine.This standard applies to (metal) sawing machines which are manufactured after the date of publication by CEN of this standard.
Machine tools - Safety - Sawing machines for cold metal (Incorporates Amendment A1: 2009; Incorporating Corrigendum February 2010)
Safety of portable power tools - Part 2: Individual requirements for electric miter saws
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号