25.100.01 切削工具综合 标准查询与下载

ISO 5611-8:2015 可转位A型刀夹头.第8部分:S型

Cartridges, type A, for indexable inserts - Part 8: Style S

ISO 5611-10:2015 可转位A型刀夹头.第10部分:U型

This part of ISO 5611 applies for cartridges type A, with hole(s) for fastening screw(s), of style U, i.e. with cutting edge angle κr = 93° for end cutting . Cartridges are intended to be used with indexable inserts made of hard metal, ceramic or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts - Part 10: Style U

ISO 5611-11:2015 可转位A型刀夹头.第11部分:W型

This part of ISO 5611 applies for cartridges type A, with hole(s) for fastening screw(s), of style W, i.e. with cutting edge angle κr = 60° for end cutting. Cartridges are intended to be used with indexable inserts made of hard metal, ceramic or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts - Part 11: Style W

ISO 5611-1:2015 可转位刀片用A型夹头. 第1部分: 尺寸的通用测量, 相关性和测定

This part of ISO 5611 is general and is completed by ISO 5611-2 to ISO 5611-12. ISO 5611 applied for cartridges, type A, for indexable inserts and gives their styles in relation to their dimensions in accordance with ISO 5611-2 to ISO 5611-12. These cartridges are primarily intended for indexable inserts made of hard metal, ceramic or other cutting materials to be used for turning operations. These kinds of cartridges are mainly clamped with one or two screws on the cartridges. Explanation of the designation code according to ISO 5608.

Cartridges, type A, for indexable inserts - Part 1: General survey, correlation and determination of dimensions

ISO 5611-6:2015 可转位A型刀夹头.第6部分:L型

This part of ISO 5611 applies for cartridges type A, with hole(s) for fastening screw(s), of style L, i.e. with cutting edge angle κr = 95° for side and end cutting. Cartridges are intended to be used with indexable inserts made of hard metal, ceramic or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts - Part 6: Style L

ISO 5611-12:2015 可转位A型刀夹头.第12部分:Y型

This part of ISO 5611 applies for cartridges type A, with hole(s) for fastening screw(s), of style Y, i.e. with cutting edge angle κr = 85° for end cutting. Cartridges are intended to be used with indexable inserts made of hard metal, ceramic or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts - Part 12: Style Y

JB/T 12760-2015 液压夹头刀柄

本标准规定了液压夹头刀柄的型式和尺寸、技术要求、标志和包装。 本标准适用于夹持柄径公差符合h6级公差带的刀具的液压夹头刀柄。

Hydraulic chuck tool holders

GSO ISO 11054:2015 切削工具 高速钢组别名称

This International Standard specifies the designation of groups of high-speed steels used for manufacturing high-speed steel (HSS) cutting tools such as taps, drills, end mills, etc. It is not intended to specify the composition of high-speed steels, which is the subject of ISO 4957.

Cutting tools -- Designation of high-speed steel groups

GSO ISO 4203:2015 平行柄工具推片和槽尺寸

This International Standard specifies the dimensions and tolerances of driving tenons and sockets for parallel shank drills and machine reamers. The illustrations are diagrammatic only and are not intended to indicate details of design.

Parallel shank tools -- Driving tenons and sockets -- Dimensions

GSO ISO 513:2015 用于以给定切削刃去除金属的硬切削材料的分类和用途主要类别和应用类别的分类

This International Standard specifies the classification and application of hard cutting materials, including hardmetals, ceramics, diamond and boron nitride, for machining by chip removal, and establishes their application. It is not applicable to other uses (mining and other percussion tools, wire drawing dies, tools operating by deformation of the metal and comparator contact tips, etc.).

Classification and application of hard cutting materials for metal removal with defined cutting edges -- Designation of the main groups and groups of application

GSO ISO 883:2015 不带安装孔的圆边硬质合金刻度钻头 尺寸

This International Standard specifies the dimensions of indexable hardmetal (carbide) inserts with rounded corners, without fixing hole and with normal clearance of 0° and 11°. These inserts are primarily intended to be mounted, by top clamping, on turning and boring tools.

Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions

GSO ISO 3364:2015 带圆形侧面和圆柱形安装孔的索引金属（硬质合金）刀片 尺寸

This International Standard specifies the dimensions of indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole and with 0° normal clearance. These inserts are primarily intended to be mounted by top and hole clamping or by hole clamping alone on turning and boring tools.

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions

GSO ISO 6987:2015 带圆角、部分圆柱形固定孔的可转位硬质材料刀片 尺寸

This International Standard specifies the dimensions of hard material inserts with rounded corners and with a partly cylindrical fixing hole. These inserts are primarily intended to be mounted on turning and boring tools using a countersunk head screw or any other fixing element, such as a pin lock.

Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole -- Dimensions

GSO ISO 1832:2015 切削刀具用可转位刀片 名称

This International Standard establishes a code for the designation of the usual types of indexable inserts for cutting tools in hard cutting materials or any other cutting materials, in order to simplify orders and specifications for such inserts. It also specifies the designations for cubic boron nitride (BL, BH, BC) inserts, tipped and solid, as well as polycrystalline diamond (DP) inserts, tipped.

Indexable inserts for cutting tools -- Designation

VDI 2841 Blatt 2-2015 CVD 金刚石工具 应用

The standard gives a recommendation for the use of CVD diamond tools regarding various machining tasks, as well as a basic description of the current methods used for cutting, dressing and reshaping. In addition, it describes special applications for diamond-coated tools, the state of the art use of cutting parameters and fundamental process changes, such as dry and wet processing, component quality as a process influencing parameter and typical forms of abrasive wear.

CVD diamond tools - Applications

GSO ISO 16462:2014 立方氮化硼刀片 尖头或实心 尺寸、类型

This International Standard applies to inserts with insert shapes in accordance with ISO 883, ISO 3364, ISO 3365, and ISO 6987, tipped with cubic boron nitride (BL, BH, BC) or made of solid cubic boron nitride (BL, BH, BC).

Cubic boron nitride inserts, tipped or solid -- Dimensions, types

GSO ISO 16463:2014 插入对角钻石晶体 尺寸、类型

This International Standard applies to inserts with insert shapes in accordance with ISO 883 and ISO 6987, tipped with polycrystalline diamond (DP).

Polycristalline diamond inserts, tipped -- Dimensions, types

BS ISO 5610-14:2014 数控刀片的矩形柄刀架.H款

Tool holders with rectangular shank for indexable inserts. Style H

BS ISO 5610-13:2014 数控刀片的矩形柄刀架.T款

Tool holders with rectangular shank for indexable inserts. Style T

BS ISO 5610-15:2014 数控刀片的矩形柄刀架.V款

Tool holders with rectangular shank for indexable inserts. Style V