25.100.01 切削工具综合 标准查询与下载

JIS B 4121:1998 硬质材料转位刀片

この規格は，主として旋削及びボーリング用工具に適用する，超硬質合金()又はセラミックスを用いたスローアウェイ(刃先交換)チップ(以下，チップという。)について規定する。

Indexable hard material inserts

JIS B 4053:1998 排屑加工用硬质切削材料的应用.排屑和应用分组的主要组别标识

この規格は，超硬質合金()，セラミックス，ダィヤモンド，窒化ほう素を含む切削用超硬質工具材料の，用途による呼び記号の付け方について規定する。この用途は，被削材から排出される切りくずの形状，及び作業条件によって分類される。

Application of hard cutting materials for machining by chip removal -- Designation of the main groups of chip removal and groups of application

JIS B 4127:1998 转位刀片用 A 型卡盘.尺寸

この規格は，スローアウェイ(刃先交換)チップ(以下，チップという。)を保持するスローアウュイチップ用カートりッジ，ジ(以下，カートリッジという。)について規定する。

Cartridges, type A, for indexable inserts -- Dimensions

ISO 6987:1998 有部分圆柱形固定孔和圆角的可转位硬质合金刀片 尺寸

本标准规定了带圆角、沉孔固定的硬质合金可转位刀片的尺寸。 本标准适用于通过沉头螺钉固定或其他方式(如插销固定)安装在切削、钻削工具上的，带圆角的、 沉孔固定的硬质合金可转位刀片。

Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions

GOST R 51140-1998 金属切削工具.安全要求和测试方法

Настоящий стандарт распространяется на: резцы с напайными твердосплавными пластинами и с механическим креплением сменных многогранных п

Metal-cutting tools. Safety requirements and test methods

ANSI/ASTM D6287:1998 切削薄膜和薄板试验样品惯例

This practice covers equipment and techniques for cutting film and sheeting specimens for testing. The specimens are nick-free, non-stretched and can be rapidly prepared. The values given in SI units are to be considered the standard. The values given in brackets are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1There is no similar or equivalent ISO standard.

Practice for Cutting Film and Sheeting Test Specimens

JIS B 4140:1997 金刚石或立方晶体氮化硼电镀工具

Diamond or cubic boron nitride electroplated tools

NF E66-315:1997 带固定孔和圆角的可转位硬质合金(碳化物合金)镶嵌刀片.尺寸

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole. Dimensions.

BS 4193-3:1997 镶硬质合金刀具.第3部分:带圆柱圆定孔和圆角可分度硬质合金(碳化物)刀片尺寸规范

This International Standard specifies the dimensions of indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole and with 0° normal clearance. These inserts are primarily intended to be mounted by top and hole clamping or by hole alone on turning and boring tools.

Hardmetal insert tooling - Specification for dimensions of indexable hardmetal (carbide) inserts with rounded corners and with cylindrical fixing hole

TIS 1416-1997 硬质材料刀具刀尖

Hard-material tool tips

ISO 3364:1997 有圆柱形固定孔和圆角的可转位硬质合金(碳化)刀片 尺寸

Gives the dimensions of indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole and with 0?clearance. Replaces the second edition. Subclause 7.5 has been added and annexes A and C have been completed.

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole - Dimensions

BS ISO TR 11255:1994 机加排屑用硬削切材料应用.ISO 513标识的信息补充

For the case when additional information to the designation according to ISO 513 about workplece Materials to be Machined, as well as toughness characteristics and performance data of the hard cutting Material is considered to be useful, this Technical Report establishes how to provide this information.

Applicability of hard cutting materials for machining by chip removal - Information additional to ISO 513 designation

BS ISO TR 11255:1996 机加排屑用硬削切材料应用 ISO 513标识的信息补充

Applicability of hard cutting materials for machining by chip removal. Information additional to ISO 513 designation

BS 4193-22:1996 硬质合金刀片工具 带断屑槽的可转位刀片的大致切屑控制区域的分类和命名

This International Standard establishes a graph format used to develop diagrams depicting chipbreaker indexable insert performance. Performance results may be derived from the cutting test described in clause 5. Classification zones are established and coded in this International Standard. Suppliers of chipbreaker insert products may classify their products using the code of the zone within which the primary use of their product is indicated. It is important to acknowledge that the relationships established by diagrams developed according to this International Standard may vary from one work ma-terial to another, as well as with other machining variables, and that it is not the purpose of this Inter-national Standard to serve as a specific guide to the practical application of chipbreaker insert products, but rather grant the user a sort of pre-selection, on a general level, that will allow him to look at only those items that have the best chance of satisfying his needs.

Hardmetal insert tooling. Classification and designation of approximate chip control zones for indexable inserts with chipbreakers

JB/T 8364.3-1996 60°圆锥管螺纹丝锥.技术规范

本标准规定了60°圆锥管螺纹丝锥的尺寸和位置公差、外观和表面粗糙度、材料和硬度、性能试验和标志、包装的技术规范。 本标准适用于加工螺纹尺寸代号为1/16～2的60°圆锥管螺纹(NPT)的丝锥。

Taps for 60°taper pipe threads Technical specification

JB/T 8365-1996 氮化钛涂层高速钢刀具.技术规范

本标准规定了氮化钛(TiN)涂层高速钢刀具的涂层前刀具(基体)的技术要求、涂层后刀具的技术要求、性能试验以及标志和包装。 本标准适用于氮化钛涂层高速钢刀具。

Titanium nitride coated high-speed steel tools Technical specification

JIS B 4053:1996 硬质工具材料及其使用分类

Hard tool materials and classification of applicability

VDI 3323-1996 硬切削材料在排屑加工中的适用性信息

Das Dokument beschreibt die Anwendung von harten Schneidstoffen.*www.vdi.de/3323

Information on applicability of hard cutting materials for machining by chip removal

NF E66-307:1995 无安装孔的圆角可分度的硬质合金(碳钢)刀片.尺寸

Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole. Dimensions.

ISO 10910:1995 有断屑器可分度到片的近似屑控制区的分类和命名

Establishes a graph format used to develop diagrams depicting chipbreaker indexable insert performance. Establishes and codes classification zones. Does not serve as a specific guide to the practical application of chipbreaker insert products, but rather grant the user a sort of pre-selection, on a general level.

Classification and designation of approximate chip control zones for indexable inserts with chipbreakers