25.100.01 切削工具综合 标准查询与下载

CNS 5338-1989 切削用超硬合金

本标准适用于以烧结法制成之切削工具用超硬合金（以下简称合金）。

Cemented Carbide Alloy of Cutting Tool

KS B 1346-1988(2008) 钢丝刷

Wire Brush

DIN 4968:1987 无固定孔倒圆角硬质合金转位式刀片

The standard specifies the dimensions, designation, material, execution, measurement of dimension m and marking of triangular and square hardmetal indexable inserts with rounded corners, without fixing hole, tolerance class G and U without and M with chip breaker. These inserts are mainly used for turning.

Indexable hardmetal inserts with rounded corners, without fixation hole

ISO 5611:1981/Add 1:1986 A型可转位刀片座.尺寸 补充件1

Cartridges, type A, for indexable inserts — Dimensions — Addendum 1

BS 4193-15:1986 镶硬质合金刀具.第15部分:无固定孔的可转位刮棱硬质合金刀片尺寸规范

This International Standard specifies the dimensions of index-able hardmetal (carbide) inserts with wiper edges, without fixing hole. These inserts are primarily intended to be mounted on milling cutters by top or wedge clamping.

Hardmetal insert tooling - Specification for dimensions for indexable hardmetal (carbide) inserts with wiper edges but without fixing hole

NF E66-319:1986 切削刀具的可分度镶嵌刀片.无固定孔的有整平刀口的硬质合金镶嵌刀片.尺寸

Indexable inserts for cutting tools. Hardmetal inserts with wiper edges, without fixing hole. Dimensions.

CNS 9723-1986 切削中心机用托板之尺度

本标准适用于切削中心机用托板之形状及尺度。

Dimensions of Pallets for Machining Centers

BS 4193-2:1986 镶硬质合金刀具.第2部分:无固定孔的圆角可转位硬质合金(碳化物)刀片尺寸规范

Inserts with normal clearance of 0 and 11.

Hardmetal insert tooling - Specification for dimensions for indexable hardmetal (carbide) inserts with rounded corners, without fixing hole

DIN 6590:1986 平面刃硬质合金无固定孔转位式刀片

The standard specifies dimensions, designation, material, execution, measurement and marking of hardmetal indexable inserts with wiper edge, without fixing hole, used mainly for milling.

Indexable hardmetall (carbide) inserts with wiper edges, without fixation hole

ISO 1832:1985 刀具用可转位刀片.名称

Indexable inserts for cutting tools — Designation

JIS B 4123:1985 带固定孔、0°后角转位刀片

Indexable inserts with cylindrical fixing hole, with 0 degrees normal clearance

JIS B 4122:1985 无固定孔、11°后角转位刀片

Indexable inserts without fixing hole, with 11 degrees normal clearance

JIS B 4121:1985 无固定孔、0°后角转位刀片

Indexable inserts without fixing hole, with 0 degrees normal clearance

JIS B 4120:1985 切削工具转位刀片的名称与符号

Indexable inserts for cutting tools -- Designation

ISO 3365:1985 去毛边无固定孔的可转位硬质合金(碳化)刀片 尺寸

This International Standard specifies the dimensions of index-able hardmetal (carbide) inserts with wiper edges, without fixing hole. These inserts are primarily intended to be mounted on milling cutters by top or wedge clamping.

Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole; Dimensions

ISO 883:1985 无固定孔的修圆角的可转位硬质合金(碳化)刀片 尺寸

This International Standard specifies the dimensions of indexable hardmetal (carbide) inserts with rounded corners, without fixing hole and with normal clearance of 0° and 11°. These inserts are primarily intended to be mounted, by top clamping, on turning and boring tools.

Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole; Dimensions

NF E66-507:1985 却学和磨削的基本数值.力、能量和功率

Basic quantities in cutting and grinding. Forces, energy, power.

ISO 3002-3:1984 切削和磨削加工的基本参数 第3部分:切削中的几何参数和运动参数

This part of ISO 3002 deals specially with the geometric and kinematic quantities in cutting. Is generally applicable to all machining operations, including grinding. Defines feed , cutting edge and related quantities, engagment, cut and pass and their dimensions. and the material removal rate respectively. Contains terms in English, French, Russian as well as equivalent terms in German, Italian and Dutch.

Basic quantities in cutting and grinding; Part 3 : Geometric and kinematic quantities in cutting

ISO 3002-4:1984 切削和磨削加工的基本参数 第4部分:力、能量和功率

This part of ISO 3002 defines forces and torques exterted by a tool or by the cutting part on the workpiece, energy and power for particular operations on specific machine tools and details of individual quantities. Contains terms in English, French and Russian as well as the equivalent terms in German, Italian and Dutch.

Basic quantities in cutting and grinding; Part 4 : Forces, energy, power

GOST 18088-1983 金属切削工具.包装和运输

Стандарт распространяется на металлорежущий, алмазный, дереворежущий и слесарно-монтажный инструмент и устанавливает общие требования к

Metall-cutting, diamond, wood-cutting and fitter's tools. Packing, marking, transportation fitter and auxliary