25.100.01 切削工具综合 标准查询与下载

CNS 9474-1982 截割刀具检验法

本标准规定割初三夹板、硬纸板或塑料板用截割刀具之检验法。

Method of Test for Cutting Device

ISO 3002-2:1982 切削和磨削加工的基本参数.第2部分:切削刀具工作部分的几何参数.刀具和工作角度的通用换算公式

This part of ISO 3002 deals with the establishment and application of the conversion formulae under the headings: definitions of the coordinate axes (based on ISO 841), definitions of the setting angles and motion angles, conversion formulae, pratical examples. Contains terms in English, French. Russian as well as the equivalent in German and Dutch.

Basic quantities in cutting and grinding; Part 2 : Geometry of the active part of cutting tools; General conversion formulae to relate tool and working angles

CNS 8353-1982 滚齿机动态检验法

本标准适用于床台直径 2500 mm 以下立式滚齿机运转性能之有关检验。1.1 本标准中所指机左右或前后方位，为对着机柱、床台边为前方，机械之右测为右方。1.2 卧式滚齿机，可按本标准应用。

Performance Inspection of Hobbing Machine

GOST 25557-1982 机床锥 基准尺寸

Machine tool tapers. Basic dimensions

GOST 9953-1982 工具的短锥.基本尺寸规格

Настоящий стандарт распространяется на укороченные инструментальные конусы Морзе

Shortened tapers of tools. Basic dimensions

CSA B175.2-M1981-1981 滚轮车刀型切削工具 单点

Roller Turner Type Cutting Tools, Single Point

ISO 5611:1981 可转位刀片用A型卡盘.尺寸

Cartridges, type A, for indexable inserts — Dimensions

ISO 529:1975/Amd 1:1981 机用短丝锥和手用丝锥 修改件1

Short machine taps and hand taps — Amendment 1

CNS 6416-1980 圆柱齿轮用齿轮形切齿刀（正齿轮用钟形切齿刀）

本标准适用于钟形切齿刀。制造模数 m 至 1 至 8 之正齿轮。（依 CNS 184 之规定）

Pinion-type Cutters for Cylindrical Gears; Extended Hub Gear Cutters for Spur Gears

CNS 6417-1980 圆柱齿轮用齿轮形切齿刀（正齿轮用圆盘形切齿刀）

本标准适用于圆盘形切齿刀。制造模数 m 自 0.5 至 12 之正齿轮依 CNS 184 之规定。

Pinion-type Cutters for Cylindrical Gears Disc-gear Cutters for Spur Gears

ISO 3365-2:1980 铣刀用可转位（一次性）硬质合金刀片.尺寸.第2部分：三角形刀片

Indexable (throwaway) hardmetal inserts for milling cutters - Dimensions - Part 2: Triangular inserts

ANSI B212.20-1980 使用夹持型夹具的带可转位刀片的碳化物切片器

This standard covers dimensional specifcations and styles of solid sintered carbide chip breakers. The values stated in US customary units are to be regarded as the standard.

Carbide Chip Breakers Used with Indexable Inserts for Clamp Type Holders

GOST 19042-1980 可转位的多面体刀片.分类.标志体系.形状

Настоящий стандарт устанавливает классификацию, систему обозначений и формы пластин сменных многогранных. По назначению пластины раздел

Throw-away (indexable) inserts. Classification. Notation. Forms

NF E66-537:1979 带传动榫的直柄刀具的套筒

Sockets for parallel shank tools with driving tenons.

CNS 4686-1979 退刀及凹槽（适用于依ＣＮＳ　规定之韦氏管螺纹）

本标准适用于依 CNS _ 规定之韦氏管螺纹之退刀及凹槽。

Run Out and Under Cut for Whit worth-Pipe Thread ( According to CNS___ )

NF E66-069:1978 直柄工具的传动杆

Driving tenons for parallel shank tools.

CNS 4324-1978 退刀及凹槽（适用于ＣＮＳ４９７　ＣＮＳ５０６之公制螺纹）

本标准适用于依 CNS 497 ~ CNS 506 公制螺纹规定的外螺纹及内螺纹之退刀及凹槽。

Rounout and Undercut for Metric Thread According to CNS 497-CNS 506

CNS 4325-1978 退刀及凹槽（适用于公制梯形、锯齿形、圆顶螺纹以及其它具有粗螺距之螺纹）

本标准适用于下列螺纹之退刀及凹槽。（1）CNS 511 梯形螺纹–螺纹轮廓。（2）CNS–具间隙、螺距 7 公厘之深纹腹圆螺纹（理论值）。（3）CNS–具间隙、铁路车辆用，单线、双线爱克姆螺纹（理论值）。（4）CNS–具间隙、螺距 7 公厘之浅纹腹圆螺纹（标称尺度）。（5）CNS 4225

Rundut and Undercut for Metric Trapezoidal Screw Threads, Knuckle Screw Threads, Bultress Screw Threads and Other Screw Threads of Coarse Pitches

GOST 3025-1978 带锥度尾柄的工具用销.结构及基本尺寸

Настоящий стандарт распространяется на клинья к инструменту с коническим хвостовиком. Стандарт не распространяется на клинья для ручных

Steel drifts for use with morse taper sockets and sleeves. Design and basic dimensions

GOST 3009-1978 销钉锁紧刀具的紧固.基本尺寸

Настоящий стандарт устанавливает основные размеры хвостовиков и отверстия под них

Pin-locking type cutting tools shanks. Basic dimensions