25.100.40 锯 标准查询与下载
共找到 147 条与 锯 相关的标准，共 10 页
本标准规定了曲线锯条的术语和定义、产品分类和标记、技术要求、试验方法、检验规则和标志、包装、运输与贮存。 本标准适用于对金属、塑料、木材等板料进行直线和曲线锯割的电动曲线锯用曲线锯条(以下简称“锯条”)。
Curve saw blade
- ICS
- 25.100.40
- CCS
- J41
- 发布
- 2011-12-20
- 实施
- 2012-07-01
This part of ISO 2336 specifies the dimensions of machine hacksaw blades. It is applicable to single-edge blades of lengths from 300 mm up to 700 mm, the tooth pitch of which is no greater than 8.5 mm.
Hacksaw blades -- Part 2: Dimensions for machine blades
- ICS
- 25.100.40
- CCS
- 发布
- 2011-10-12
- 实施
This part of IS0 2336 specifies the dimensions of hand hacksaw blades. It is valid for single edged blades of length equal to300 mm, the tooth pitch of which is no greater than I,4 mm.
HACKSAW BLADES - PART 1: DIMENSIONS FOR HAND BLADES
- ICS
- 25.100.40
- CCS
- 发布
- 2011-10-12
- 实施
Metal slitting saws with fine and coarse teeth - Metric series
- ICS
- 25.100.40
- CCS
- J47
- 发布
- 2011-10
- 实施
This Standard specifies the dimensions of machine saw blades. Applies to the blades with a single cutting edge, with a length of 300 mm to 1000 mm, while the tooth which does not exceed 10 mm.
Hacksaw blades Part 2- Dimensions for machine blades
- ICS
- 25.100.40
- CCS
- 发布
- 2010-03-01
- 实施
- 2010-04-01
Hand-held motor-operated electric tools -- Safety -- Part 2-5: Particular requirements for circular saws
- ICS
- 25.100.40
- CCS
- K64
- 发布
- 2009-02-20
- 实施
Hardmetal slitting saws (Amendment 1)
- ICS
- 25.100.40
- CCS
- J57
- 发布
- 2009-02-20
- 实施
Saw blades for metal cutting. Specifications
- ICS
- 25.100.40
- CCS
- J41
- 发布
- 2009
- 实施
- 2011-01-01
Covers requirements for material, hardness, dimensions and permissible runout of plain slitting saws (i.e. without cutting edges on the sides of the blade).
High speed steel slitting saws
- ICS
- 25.100.40
- CCS
- J41
- 发布
- 2008-05-30
- 实施
Covers 5 types of steel hand hacksaw blades of nominal length 300 mm and that have a single-toothed edge.
Hand hacksaw blades
- ICS
- 25.100.40
- CCS
- J47
- 发布
- 2007-06-15
- 实施
Covers the material, dimensional and finish requirements for bow-saw frames of the lever pattern and bow-saw blades.
Bow-saw frames and blades
- ICS
- 25.100.40
- CCS
- J47
- 发布
- 2007-04-13
- 实施
JB/T 10231的本部分规定了金属切割带锯条的检测方法和检测器具。这些方法并非唯一的。 本部分适用于按JB/T 7963.1～7963.3和JB/T 8798生产的金属切割带锯条的检测。
Tool inspection methods Part 25: Metal cutting band saw blades
- ICS
- 25.100.40
- CCS
- J41
- 发布
- 2006-09-14
- 实施
- 2007-03-01
JB/T 10231的本部分规定了机用锯条的检测方法和检测器具。这些方法并非唯一的。 本部分适用于按GB/T 6080.1～6080.2生产的锯条的检测。
Tool inspection methods Part 24: Machine backsaw blades
- ICS
- 25.100.40
- CCS
- J41
- 发布
- 2006-09-14
- 实施
- 2007-03-01
This part of ISO 2336 specifies the dimensions of machine hacksaw blades. It is applicable to single-edge blades of lengths from 300 mm up to 700 mm, the tooth pitch of which is no greater than 8,5 mm.
Hacksaw blades - Part 2: Dimensions for machine blades
- ICS
- 25.100.40
- CCS
- J47
- 发布
- 2006-08
- 实施
This part of ISO 4875 specifies the characteristics and dimensions of the various types of metal-cutting band saw blades.
Metal-cutting band saw blades - Part 2: Characteristics and dimensions
- ICS
- 25.100.40
- CCS
- J41
- 发布
- 2006-07
- 实施
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for circular saws
- ICS
- 25.100.40
- CCS
- 发布
- 2005-07-12
- 实施
除以下外，适用第1部之本节：1.1 追加：本标准适用于所有型式的圆盘锯(以下称为电锯)。本标准不适用于使用研磨轮的电锯。
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for circular saws
- ICS
- 25.100.40
- CCS
- 发布
- 2005-07-12
- 实施
- 2005-07-12
제1부 일반 요구 사항의 항목으로 대체한다.1.1&##8194;수&##819
Safety of hand－held motor－operated electric tools－Part 2：Particular requirements for circular saws and circular knives
- ICS
- 25.100.40
- CCS
- K64
- 发布
- 2002-10-29
- 实施
- 2002-10-29
이 규격은 쇠톱날을 끼워 사용하는 쇠톱대에 대하여 규정한다.
Frame of band type saw
- ICS
- 25.100.40
- CCS
- J40
- 发布
- 2002-07-31
- 实施
- 2002-07-31
