共找到 432 条与 丝锥和板牙 相关的标准,共 29 页
JB/T 8824的本部分规定了统一螺纹圆板牙(以下简称圆板牙)的型式和尺寸、技术要求、性能试验、标志和包装的基本要求。 本部分适用于加工代号为No.0~No.12、¼~2¾的统一螺纹2A公差带的圆板牙,根据使用需要也可生产1A、3A公差带的圆板牙。
Tool for unified threads.Part 5:Circular screwing dies
Ground thread taps for ISO metric threads of tolerances 7G, 8G and special tolerances, coarse and fine pitches - Part 4: Manufacturing tolerances on the threaded portion
JB/T 8825的本部分规定了惠氏螺纹圆板牙(以下简称圆板牙)的型式和尺寸、技术要求、性能试验、标志和包装的基本要求。 本部分适用于加工螺纹代号为1/8~2¾惠氏螺纹的圆板牙。
Tool for whitworth threads.Part 5:Circular screwing dies
JB/T 8825的本部分规定了惠氏螺纹用滚丝轮的型式、尺寸及偏差、技术要求、标志和包装等的基本要求。 滚丝轮分为两种精度等级:2级和3级。2级适用于加工中等级外螺纹,3级适用于加工自由级外螺纹。 本部分适用于加工惠氏螺纹的滚丝轮。
Tool for whitworth threads.Part 7:Thread rolling cylindrical dies
JB/T 8825的本部分规定了惠氏螺纹丝锥(以下简称丝锥)的型式和尺寸、标记示例、螺纹公差和技术条件。 本部分适用于加工螺纹代号为1/8~4惠氏螺纹的丝锥。
Tool for whitworth threads.Part 1:Taps
JB/T 8825的本部分规定了按JB/T 8825.1生产的惠氏螺纹丝锥(以下简称丝锥)和按JB/T 8825.4生产的惠氏螺纹螺母丝锥螺纹牙型和尺寸的极限偏差。 本部分适用于加工惠氏螺纹的丝锥。
Tool for whitworth threads.Part 2:Manufacturing tolerances on the threaded portion of taps
JB/T 8825的本部分规定了惠氏螺纹螺母丝锥(以下简称螺母丝锥)的型式、尺寸、标记等的基本要求。 本部分适用于加工螺纹代号为1/8~2惠氏螺纹的螺母丝锥。
Tool for whitworth threads.Part 4:Nut taps
JB/T 8825的本部分规定了惠氏螺纹用搓丝板(以下简称搓丝板)的型式尺寸、牙型尺寸及偏差、技术要求、标志和包装等的基本要求。 惠氏螺纹搓丝板分为两种精度等级:2级和3级。2级适用于加工中等级外螺纹,3级适用于加工自由级外螺纹。 本标准适用于加工惠氏螺纹的搓丝板。
Tool for whitworth threads.Part 6:Thread rolling flat dies
JB/T 8825的本部分规定了惠氏螺纹丝锥(以下简称丝锥)和惠氏螺纹螺母丝锥(以下简称螺母丝锥)的技术要求、标志和包装等基本要求。 本部分适用于按JB/T 8825.1和JB/T 8825.4生产的加工惠氏螺纹的丝锥和螺母丝锥。
Tool for whitworth threads.Part 3:Technical specification for taps
Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines (IEC 61029-2-12:2010, modified); German version EN 61029-2-12:2011
This Standard specifies the general dimensions of hand-operated and machine-operated screwing dies.
Dies for threading machine and manually and retracing
Sets of taps - Sets of 2 taps for pipe threads G 1/16 to G 4 and Rp 1/16 to Rp 4
This Standard specifies the manufacturing tolerances on the threaded portion of taps for producing the ISO metric threads of tolerances classes 4H to 8H and 4G to 6G as defined in ABNT NBR ISO 965-1 to 3 (excluding, consequently, classes 7G and 8G considered as usually produced with ground thread taps).
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion
JB/T 8364的本部分规定了60°圆锥管螺纹圆板牙的型式和尺寸、技术要求、标志、包装的基本要求。 本部分适用于加工螺纹尺寸代号为1/16-2的60°圆锥管螺纹(NPT)的圆板牙。
Tools for taper pipe threads with 60°thread angle.Part 1:Circular screwing die for taper pipe threads with 60°thread angle
JB/T 8364的本部分规定了60°圆锥管螺纹丝锥的技术要求、标志和包装等基本要求。 本部分适用于加工螺纹尺寸代号为1/16-2的60°圆锥管螺纹丝锥。
Tools for taper pipe threads with 60°thread angle.Part 3:Taps for taper pipe threads with 60°thread angle.Technical specification
JB/T 8364的本部分规定了60°圆锥管螺纹丝锥的型式和尺寸。 本部分适用于加工螺纹尺寸代号为1/16-2的60°圆锥管螺纹丝锥。
Tools for taper pipe threads with 60°thread angle.Part 2:Taps for taper pipe threads with 60°thread angle
This Standard delineates the dimensional data for the inch series helical coil screw thread inserts and the threaded hole into which it is installed. Both free-running and screw-locking types having unified fine and unified course thread series from size 1 through 1 1/2 inch are covered. Appendices that describe insert selection, STI (Screw Thread Insert) taps, gages, and gaging, insert installation, and removal tooling are also included. The inclusion of dimensional data in this Standard is not intended to imply that all products described are stock sizes. Consumers should consult with manufacturers concerning availability.
Helical Coil Screw Thread Inserts-Free Running and Screw Locking (Inch Series)
Covers the dimensional and physical requirements for screwing taps.
Screwing taps
This translation has been made based on the Amendment to the origi- nal Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee as the result of proposal for revision of Japanese Industrial Standard with the draft being attached, based on the provi- sion of Article 12 Clause 1 of the Industrial Standardization Law ap- plicable to the case of revision by the provision of Article 14. Consequently, JIS B 4501:1996 is partially replaced with this Amend- ment.
Thread rolling cylindrical dies (Amendment 1)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号