25.100.70 磨料磨具 标准查询与下载
共找到 1503 条与 磨料磨具 相关的标准，共 101 页
Bonded abrasive products－Dimensions－Part 9：Grinding wheels for high-pressure grinding
- ICS
- 25.100.70
- CCS
- 发布
- 2015-12-31
- 实施
Bonded abrasive products－Dimensions－Part 10：Stones for honing and superfinishings
- ICS
- 25.100.70
- CCS
- 发布
- 2015-12-31
- 实施
Bonded abrasive products－General requirements
- ICS
- 25.100.70
- CCS
- 发布
- 2015-12-31
- 实施
Bonded abrasive products－Dimensions－Part 9：Grinding wheels for high-pressure grinding
- ICS
- 25.100.70
- CCS
- 发布
- 2015-12-31
- 实施
Bonded abrasive products－Dimensions－Part 10：Stones for honing and superfinishings
- ICS
- 25.100.70
- CCS
- 发布
- 2015-12-31
- 实施
Bonded abrasive products－General requirements
- ICS
- 25.100.70
- CCS
- 发布
- 2015-12-31
- 实施
Bonded abrasive products－Dimensions－Part 11：Hand finishing sticks
- ICS
- 25.100.70
- CCS
- 发布
- 2015-12-31
- 实施
Bonded abrasive products -- General requirements
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2015-12-21
- 实施
This European Standard only applies to superabrasives products containing natural or synthetic diamond or cBN (cubic boron Nitride). It includes precision grinding and cutting-off wheels, non-precision cutting-off wheels, diamond wires, mounted points and other superabrasive products for non-precision grinding. It also applies to reconditioned superabrasive cutting-off wheels. This European Standard specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the superabrasive products. This European Standard contains also procedures and tests for verification of the compliance with the requirements as well as safety information for use which is to be made available to the user by the manufacturer. The hazards taken into consideration are listed in Clause 4. This European Standard does not apply to bonded abrasive products, coated abrasive products, rotating dressing tools, truers nor any non-rotating superabrasive products.
Safety requirements for superabrasive products
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2015-12
- 实施
Abrasive products - Checking the grain size of superabrasives (ISO 6106:2013)
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2015-11
- 实施
本标准规定了金属结合剂金刚石磨边轮的形状和尺寸代号、产品分类、产品标记、产品规格、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于陶瓷、石材磨边用金属结合剂金刚石磨边轮(以下简称磨边轮)。
Superabrasive products.Metal bond diamond squaring wheel
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2015-10-10
- 实施
- 2016-03-01
本标准规定了金刚石滚筒的术语和定义、形状及尺寸代号、基本尺寸、产品标记、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于金属结合剂金刚石滚筒(以下简称滚筒)，产品主要用于陶瓷、石材及各类建筑材料表面磨削加工。
Superabrasive products.Diamond roller
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2015-10-10
- 实施
- 2016-03-01
本标准规定了无纺布抛光轮的代号与标记、基本尺寸、技术要求、试验方法、检验规则、标志、运输、贮存和保质期。 本标准适用于用磨料、粘结剂和无纺布制成的抛光轮。
Coated abrasives.Non-woven wheel
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2015-10-10
- 实施
- 2016-03-01
本标准规定了树脂和橡胶薄片砂轮的形状及代号、基本尺寸、标记、技术要求、试验方法、检验规则、包装、运输和贮存。 本标准适用于树脂和橡胶结合剂制造的切割、开槽、磨转子槽等用途的薄片砂轮(以下简称砂轮)，不适用于纤维增强树脂、纤维增强橡胶结合剂切割砂轮。
Bonded abrasive products.Resinoid and rubber bond flat grinding wheel
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2015-10-10
- 实施
- 2016-03-01
