25.100.70 磨料磨具 标准查询与下载

GOST 32833-2014 金刚石切割砂轮. 规格

Diamond cutting-off wheels. Specifications

GSO ISO 8486-1:2013 抛光材料晶粒尺寸分布的设计和测定 第1部分:F4至F 220

This part of ISO 8486 sets forth a method for determining or checking the size distribution of macrogrits from F4 to F220 in fused aluminium oxide and silicon carbide. It specifies the grit designation for the testing of those grits used in the manufacture of bonded abrasive products and general industrial applications and those removed from bonded products.

Bonded abrasives -- Determination and designation of grain size distribution -- Part 1: Macrogrits F4 to F220

GSO ISO 603-6:2013 互连磨料产品 尺寸 第6部分：家用磨料机磨盘

This part of ISO 603 specifies the nominal dimensions, in millimeters, of: — Type 1: Straight grinding wheel (general applictaion and saw sharpening) — Type 3: Wheel tapered on one side — Type 5: Wheel recessed on one side — Type 6: Straight cup wheel — Type 7: Wheel recessed on both sides — Type 11: Taper cup wheel — Type 12: Dish wheel These bonded abrasive products are intended to be used for grinding or regrinding of cutting faces and edges of tools. The workpieces and the grinding wheels are mechanically guided.

Bonded abrasive products -- Dimensions -- Part 6: Grinding wheels for tool and tool room grinding

GSO ISO 15637-1:2013 圆柱形砂磨套筒的紧固 第1部分：手动安装磨床轴的紧固

This part of ISO 15637 applies to holding fixtures with shank for use with cylindrical abrasive sleeves with D ≤ 100 mm in accordance with ISO 2421. Holding fixtures with shank having a diameter D ≤ 100 mm mostly have lamellar cores and are used on hand-held grinding machines. The impact of centrifugal forces on the lamellae result in an increase in diameter and thereby clamp the abrasive sleeve on to the holding fixture.

Holding fixtures of cylindrical abrasive sleeves -- Part 1: Holding fixtures with shank for hand-held grinding machines

GSO ISO 603-14:2013 互连磨料产品 尺寸 第14部分：用于角磨机边缘去毛刺和磨削的磨盘

This part of ISO 603 specifies the nominal dimensions, in millimeters, of: — Type 6: Straight cup wheel — Type 11: Taper cup wheel — Type 27: Depressed centre grinding wheel — Type 28: Depressed centre grinding wheel — cone shaped These bonded abrasive products are intended to be used for deburring and fettling/snagging of any surface of a workpiece using hand held grinding machines (angle grinder). The workpiece is fixed, the grinding machine is guided by hand.

Bonded abrasive products -- Dimensions -- Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder

GSO ISO 9136-1:2013 抛光磨料质量密度设计 第1部分:粒度

This part of ISO 9136 specifies a test method for the determination of the bulk density of bonded and coated abrasive macrogrits.

Abrasive grains -- Determination of bulk density -- Part 1: Macrogrits

GSO ISO 603-11:2013 固结磨具产品 尺寸 第11部分：手工抛光棒

This part of ISO 603 specifies the nominal dimensions, in millimeters, of: — Type 90: Hand finishing sticks These bonded abrasive products are intended to be used for the generation and sharpening of any tool surface. The workpiece is held in the hand and the finishing stick is guided by hand.

Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks

GSO ISO 603-1:2013 互连磨料产品 尺寸 第1部分：用于在中心之间传导外圆柱齿的齿轮

This part of ISO 603 specifies the nominal dimensions, in millimeters, of: — Type 1: Straight grinding wheel — Type 5: Wheel recessed on one side — Type 7: Wheel recessed on both sides — Type 20: Wheel relieved on one side — Type 21: Wheel relieved on both sides — Type 22: Wheel relieved on one side and recessed on the other side — Type 23: Wheel relieved and recessed on one side — Type 24: Wheel relieved and recessed on one side and recessed on the other side — Type 25: Wheel relieved and recessed on one side and relieved on the other side — Type 26: Wheel relieved and recessed on both sides. — Type 38: Hubbed wheel — Type 39: Double hubbed wheel These bonded abrasive products are intended to be used for external cylindrical grinding between centres. The workpiece and the grinding wheel are mechanically guided.

Bonded abrasive products -- Dimensions -- Part 1: Grinding wheels for external cylindrical grinding between centres

GSO ISO 6344-2:2013 抛光磨料 粒度分析 第2部分：P12至P220磨料的粒度分布设计

This part of ISO 6344 sets forth a method for determining or testing the grain size distribution of electro-fused aluminium oxide and silicon carbide macrogrits P 12 to P 220 for coated abrasives as defined in ISO 6344-1. It applies both to those grits used in the manufacture of coated abrasive products and to those grits removed from products for testing purposes

Coated abrasives -- Grain size analysis -- Part 2: Determination of grain size distribution of macrogrits P12 to P220

GSO ISO 603-7:2013 互连磨料产品尺寸 第7部分：手动控制磨刀装置用磨盘

This part of ISO 603 specifies the nominal dimensions, in millimeters, of: — Type 1: Straight grinding wheel — Type 5: Wheel recessed on one side — Type 6: Straight cup wheel — Type 35: Cemented or clamped disc wheel — Type 36: Disc wheel with inserted nuts — Type 37: Cylinder wheels with inserted nuts These bonded abrasive products are intended to be used for the grinding of any surface and regrinding of workpieces. The workpiece is guided by hand, the grinding wheel is fixed.

Bonded abrasive products -- Dimensions -- Part 7: Grinding wheels for manually guided grinding

GSO ISO 21949:2013 抛光金刚砂材料 带孔金刚砂板 可除尘

This International Standard specifies the nominal dimensions, tolerances and designation of the active surface of plain sheets with holes for dust extraction. Extra length has to be taken into account in this International Standard. Plain sheets with holes for dust extraction in accordance with this International Standard are intended for use on sanders with dust extraction.

Coated abrasives -- Plain sheets with holes for dust extraction

GSO ISO 21951:2013 抛光打磨材料 简单的带孔圆盘 可去除灰尘

This International Standard specifies the nominal dimensions of plain discs with holes for dust extraction. Plain discs in accordance with this International Standard are intended for use on disc sanders with dust extraction.

Coated abrasives -- Plain discs with holes for dust extraction

GSO ISO 21537-1:2013 用良好的光滑材料固定车轮部件的轮辋（轮胎） 第1部分：天然石材

This part of ISO 21537 specifies dimensions for clamping flanges for the mounting of superabrasive cutting-off wheels (diamond saws) for use on stationary cutting-off machines for the machining of natural stone.

Clamping flanges for superabrasive cutting-off wheels - Part 1: Natural stone

GSO ISO 21948:2013 抛光金刚砂材料 平板

This International Standard specifies the nominal dimensions, tolerances and designations of the active surface of plain sheets. It applies to plain sheets intended for use on hand held grinding machines or for hand sanding.

Coated abrasives -- Plain sheets

GSO ISO/TR 24857:2013 合成金刚石碎石制品 单颗粒抗压塌陷强度 -“DiaTest”系统

This Technical Report gives the results of a study to determine the feasibility of the “DiaTest-SI”1) single particle strength tester as a system for measuring the compressive strength of synthetic industrial diamond grit products. Issues that were addressed included: the range of grit products (in terms of both size and strength) for which the “DiaTest-SI” system was appropriate, the choice of distribution statistics with which to describe diamond strength, and the similarities (at a statistically significant level) of the results from various test centres.

Synthetic industrial diamond grit products -- Single-particle compressive failure strength -- "DiaTest-SI" system

GSO ISO 603-13:2013 互连磨料产品 尺寸 第13部分：用于去除立式磨刀机碎屑和抛光边缘的磨盘

This part of ISO 603 specifies the nominal dimensions, in millimeters, of: — Type 6: Straight cup wheel — Type 35: Cemented or clamped disc wheel — Type 36: Disc wheel with inserted nuts These bonded abrasive products are intended to be used for deburring and fettling of any surface of a workpiece using hand-held grinding machines (vertical grinder). The workpiece is fixed, the grinding machine is guided by hand.

Bonded abrasive products -- Dimensions -- Part 13: Grinding wheels for deburring and fettling on a vertical grinder

GSO ISO 21537-2:2013 用良好的光滑材料固定车轮部件的轮辋（轮胎） 第2部分：建筑和施工

This part of ISO 21537 specifies dimensions for clamping flanges for the mounting of superabrasive cutting-off wheels (diamond saws) for use on stationary cutting-off machines, mobile cutting-off machines and hand-held cutting-off machines for the cutting of mineral materials.

Clamping flanges for superabrasive cutting-off wheels - Part 2: Building and construction

GSO ISO 603-3:2013 互连磨料产品 尺寸 第3部分：圆柱形机器的齿盘

This part of ISO 603 specifies the nominal dimensions, in millimeters, of: — Type 1: Straight grinding wheel — Type 5: Wheel recessed on one side These bonded abrasive products are intended to be used for the grinding of the internal surface of a rotating workpiece. The workpiece and the grinding wheel are mechanically guided.

Bonded abrasive products -- Dimensions -- Part 3: Grinding wheels for internal cylindrical grinding

GSO ISO 603-10:2013 固结磨具产品 尺寸 第10部分：磨刀石

his part of ISO 603 specifies the nominal dimensions, in millimeters, of: — Type 54: Stones for honing and superfinishings These bonded abrasive products are intended to be used for the generation of flat or cylindrical surfaces, for the generation of helical surfaces or other contours. The workpiece and the honing stones are mechanically guided.

Bonded abrasive products -- Dimensions -- Part 10: Stones for honing and superfinishings

GSO ISO 603-8:2013 固结磨料产品 尺寸 第8部分：用于磨边、去除毛刺和撕裂的磨片

This part of ISO 603 specifies the nominal dimensions, in millimeters, of: — Type 1 Straight grinding wheel These bonded abrasive products are intended to be used for deburring and fettling of any surface of a workpiece. The workpiece is manually guided and the grinding wheel is fixed.

Bonded abrasive products -- Dimensions -- Part 8: Grinding wheels for deburring and fettling/snagging